Difference between revisions of "Component: Sense Hat (Raspberry Pi Hat)"
From Flowcode Help
Jump to navigationJump to search| Line 59: | Line 59: | ||
{{Fcfile|RPISenseHat.fcfx|RPI Sense HAT}} | {{Fcfile|RPISenseHat.fcfx|RPI Sense HAT}} | ||
| + | |||
| + | |||
| Line 163: | Line 165: | ||
| width="90%" style="border-top: 2px solid #000;" | ''Return'' | | width="90%" style="border-top: 2px solid #000;" | ''Return'' | ||
|} | |} | ||
| − | |||
| − | |||
Revision as of 12:21, 3 February 2023
| Author | Matrix TSL |
| Version | 1.0 |
| Category | Raspberry Pi Hat |
Contents
Sense Hat component
A component to drive various features on the Raspberry Pi Sense Hat. Supported Features: 8x8 RGB LED / 5-Way Joystick
Component Source Code
Please click here to download the component source project: FC_Comp_Source_temp/RPI_SenseHat.fcfx
Please click here to view the component source code (Beta): FC_Comp_Source_temp/RPI_SenseHat.fcfx
Detailed description
No detailed description exists yet for this component
Examples
A simple example to sample the joystick and output a fixed colour to all 8 x 8 RGB LEDs. Pressing up on the joystick outputs blue to the LEDs and pressing down outputs red.
Macro reference
Initialise
|
Initialise |
| Initialises the I2C peripheral ready for communications. | |
 - VOID
|
Return |
ReadJoystick
|
|
ReadJoystick |
| Reads the joystick Returns the direction as a bit field. 1 = Down / 2 = Right / 4 = Up / 8 = Click / 16 = Left | |
 - BYTE
|
Return |
SetAll
|
|
SetAll |
| Sets all pixels to a specific colour | |
| - BYTE
|
R |
| - BYTE
|
G |
| - BYTE
|
B |
| - VOID
|
Return |
SetPixel
|
|
SetPixel |
| Seta the colour of a single pixel | |
| - BYTE
|
X |
| - BYTE
|
Y |
| - BYTE
|
R |
| - BYTE
|
G |
| - BYTE
|
B |
| - VOID
|
Return |
Property reference
|
Properties |
|
I2C |
|
Channel |
| Channel selection | |
|
SDA |
| Pin used for SDA (data signal) | |
|
|
SCL |
| Pin used for SCL (clock signal) | |
|
Stop Delay |
| On older microcontroller devices there is a potential for the I2C hardware channel to lock up if there is not a 10ms delay between an I2C stop event and the next I2C start event. Most modern microcontrollers will not have a problem so this property can be disabled to speed up the I2C communications. | |
|
|
Baud Select |
| Baud rate option selector | |
|
Baud Rate |
| Baud rate to be used | |
|
|
Simulation |
|
|
Scope Traces |
| Selects if the component pin connections are automatically generated on the data recorder window or not. Yes: Automatically add the component pins to a group on the data recorder which will reflect the sim data during simultion. No: Do not show the pin signals on the data recorder window. | |
|
|
Console Data |
| Selects if the console data is automatically generated or not | |
|
|
API |
