Component: FTDI (FT800) (FT800) (Misc)

Author	MatrixTSL
Version	2.0
Category	Misc

FTDI (FT800) component

The FT800 provides a powerful feature set in a small package to create dynamic HMI interfaces. The device supports line by line graphics rendering to 1/16 of a pixel on displays with resolution up to 512 x 512 with 262K colours. The chip includes a touch controller for sensing touch feedback from a TFT display with a resistive touch panel as well as a sound synthesizer and audio playback with a PWM output to drive a speaker.

Component Source Code

Please click here to download the component source project: FC_Comp_Source_FTDI-FT800.fcfx

Please click here to view the component source code (Beta): FC_Comp_Source_FTDI-FT800.fcfx

Detailed description

No detailed description exists yet for this component

Examples

No additional examples

Macro reference

	IncrementCommandOffset
Adds commandSize to the currentOffset. Checks for 4K ring-buffer offset roll-over
- UINT	currentOffset
graphics processor command list pointer
- BYTE	commandSize
number of bytes to increment the offset
- UINT	Return

	MemRead16
Reads a single unsigned int from the FT800 internal address space
- ULONG	Address
- UINT	Return

	MemRead8
Reads a single data byte from the FT800 internal address space
- ULONG	Address
- BYTE	Return

	MemRead32
Reads a single unsigned long from the FT800 internal address space
- ULONG	Address
- ULONG	Return

	MemWrite16
Writes a unsigned int value to the FT800 internal address space
- ULONG	Address
- UINT	Data
- VOID	Return

	MemWrite8
Writes a byte value to the FT800 internal address space
- ULONG	Address
- BYTE	Data
- VOID	Return

	CommandWrite
Sends FT800 command
- BYTE	Command
- VOID	Return

	MemWrite32
Writes a unsigned long value to the FT800 internal address space
- ULONG	Address
- ULONG	Data
- VOID	Return

	Initialise
System initialization routines. Executed once on reset. Returns 0 if device not detected or 1 if device is correctly initialised.
- BYTE	Return

Property reference

	Properties
	SPI Properties
	Channel
SPI Channel selector
	Prescale
Prescale option selector
	MOSI
SPI Data Out Pin SDO - Also Known as Master Out Slave In (MOSI) when used in Master mode.
	MISO
SPI Data In Pin SDI - Also Known as Master In Slave Out (MISO) when used in Master mode.
	CLK
SPI Clock Pin CLK - The Clock signal is driven by the SPI master.
	Pin Connections
	Power Pin
	CS Pin
	Display Properties
	Width
Active width of LCD display
	Height
Active height of LCD display
	HCycle
Total number of clocks per line
	HOffset
Start of active line
	HSync0
Start of horizontal sync pulse
	HSync1
End of horizontal sync pulse
	VCycle
Total number of lines per screen
	VOffset
Start of active screen
	VSync0
Start of vertical sync pulse
	VSync1
End of vertical sync pulse
	PixelClock
Pixel Clock
	Swizzle
Define RGB output pins
	Clock Polarity
Define active edge of PCLK
	Simulation
	Scope Traces
Selects if the scope traces are automatically generated or not
	Console Data
Selects if the console data is automatically generated or not
	API

==Macro reference==

	IncrementCommandOffset
Adds commandSize to the currentOffset. Checks for 4K ring-buffer offset roll-over
- UINT	currentOffset
graphics processor command list pointer
- BYTE	commandSize
number of bytes to increment the offset
- UINT	Return

	MemRead16
Reads a single unsigned int from the FT800 internal address space
- ULONG	Address
- UINT	Return

	MemRead8
Reads a single data byte from the FT800 internal address space
- ULONG	Address
- BYTE	Return

	MemRead32
Reads a single unsigned long from the FT800 internal address space
- ULONG	Address
- ULONG	Return

	MemWrite16
Writes a unsigned int value to the FT800 internal address space
- ULONG	Address
- UINT	Data
- VOID	Return

	MemWrite8
Writes a byte value to the FT800 internal address space
- ULONG	Address
- BYTE	Data
- VOID	Return

	CommandWrite
Sends FT800 command
- BYTE	Command
- VOID	Return

	MemWrite32
Writes a unsigned long value to the FT800 internal address space
- ULONG	Address
- ULONG	Data
- VOID	Return

	Initialise
System initialization routines. Executed once on reset. Returns 0 if device not detected or 1 if device is correctly initialised.
- BYTE	Return

Property reference

	Properties
	SPI Properties
	Channel
SPI Channel selector
	Prescale
Prescale option selector
	MOSI
SPI Data Out Pin SDO - Also Known as Master Out Slave In (MOSI) when used in Master mode.
	MISO
SPI Data In Pin SDI - Also Known as Master In Slave Out (MISO) when used in Master mode.
	CLK
SPI Clock Pin CLK - The Clock signal is driven by the SPI master.
	Pin Connections
	Power Pin
	CS Pin
	Display Properties
	Width
Active width of LCD display
	Height
Active height of LCD display
	HCycle
Total number of clocks per line
	HOffset
Start of active line
	HSync0
Start of horizontal sync pulse
	HSync1
End of horizontal sync pulse
	VCycle
Total number of lines per screen
	VOffset
Start of active screen
	VSync0
Start of vertical sync pulse
	VSync1
End of vertical sync pulse
	PixelClock
Pixel Clock
	Swizzle
Define RGB output pins
	Clock Polarity
Define active edge of PCLK
	Simulation
	Scope Traces
Selects if the scope traces are automatically generated or not
	Console Data
Selects if the console data is automatically generated or not
	API

==Macro reference==

	IncrementCommandOffset
Adds commandSize to the currentOffset. Checks for 4K ring-buffer offset roll-over
- UINT	currentOffset
graphics processor command list pointer
- BYTE	commandSize
number of bytes to increment the offset
- UINT	Return

	MemRead16
Reads a single unsigned int from the FT800 internal address space
- ULONG	Address
- UINT	Return

	MemRead8
Reads a single data byte from the FT800 internal address space
- ULONG	Address
- BYTE	Return

	MemRead32
Reads a single unsigned long from the FT800 internal address space
- ULONG	Address
- ULONG	Return

	MemWrite16
Writes a unsigned int value to the FT800 internal address space
- ULONG	Address
- UINT	Data
- VOID	Return

	MemWrite8
Writes a byte value to the FT800 internal address space
- ULONG	Address
- BYTE	Data
- VOID	Return

	CommandWrite
Sends FT800 command
- BYTE	Command
- VOID	Return

	MemWrite32
Writes a unsigned long value to the FT800 internal address space
- ULONG	Address
- ULONG	Data
- VOID	Return

	Initialise
System initialization routines. Executed once on reset. Returns 0 if device not detected or 1 if device is correctly initialised.
- BYTE	Return

Property reference

	Properties
	SPI Properties
	Channel
SPI Channel selector
	Prescale
Prescale option selector
	MOSI
SPI Data Out Pin SDO - Also Known as Master Out Slave In (MOSI) when used in Master mode.
	MISO
SPI Data In Pin SDI - Also Known as Master In Slave Out (MISO) when used in Master mode.
	CLK
SPI Clock Pin CLK - The Clock signal is driven by the SPI master.
	Pin Connections
	Power Pin
	CS Pin
	Display Properties
	Width
Active width of LCD display
	Height
Active height of LCD display
	HCycle
Total number of clocks per line
	HOffset
Start of active line
	HSync0
Start of horizontal sync pulse
	HSync1
End of horizontal sync pulse
	VCycle
Total number of lines per screen
	VOffset
Start of active screen
	VSync0
Start of vertical sync pulse
	VSync1
End of vertical sync pulse
	PixelClock
Pixel Clock
	Swizzle
Define RGB output pins
	Clock Polarity
Define active edge of PCLK
	Simulation
	Scope Traces
Selects if the scope traces are automatically generated or not
	Console Data
Selects if the console data is automatically generated or not
	API