Component: IO Expander (PCF8575) (PCF8575) (General Input)

Author	Matrix TSL
Version	1.0
Category	General Input

IO Expander (PCF8575) component

Provides 16 digital input/output pins arranged into 8-bit ports using a I2C bus connection. Up to eight expanders can be connected to the same I2C peripheral by means of three address pins. Supports the PCF8575 device allowing up to 8 expanders to be connected to the same I2C bus.

Component Source Code

Please click here for the component source code: FC_Comp_Source_IOEXP_PCF8575.fcfx

Detailed description

No detailed description exists yet for this component

Examples

No additional examples

Macro reference

	ReadPort
Reads the current input value of the I/O pins.
- UINT	Return

	WritePort
Writes an output value to the IO pins
- UINT	Value
Value to write. Range 0-65535
- VOID	Return

	Initialise
- VOID	Return

Property reference

	Properties
	I²C Communications
	Device Type
	External Address
Selects the value of the three address pins for the MCP23S17.
	Channel
Channel selection
	Stop Delay
On older microcontroller devices there is a potential for the I2C hardware channel to lock up if there is not a 10ms delay between an I2C stop event and the next I2C start event. Most modern microcontrollers will not have a problem so this property can be disabled to speed up the I2C communications.
	Baud Select
Baud rate option selector
	Baud Rate
Baud rate to be used
	SDA
Pin used for SDA (data signal)
	SCL
Pin used for SCL (clock signal)
	Simulation
	Label
	Scope Traces
Selects if the scope traces are automatically generated or not
	Console Data
Selects if the console data is automatically generated or not
	API