Good Day I have a user macro that has bytes D0 to D7 that needs to be input as data. In an effort to simplify code and reduce the data handling complexity of the data ( u know passing one byte at a time to the macro D0 = D0) I have setup an array ARRAY[8] as a parameter However when I call the macro...

Good day LeighM Thank you very much its working now Summery for some one that mite be reading this in the future Step 1 make sure you have the latest operating system on the pi this makes the rest much easier step 2 enter the GUI and disable the serial console or config file step 3 enable the serial...

I have a raspberry pi and I have setup the UART component during simulation it works but when it run on the 2b pi no data comes out of the uart any thing i may be missing I do have the initialization macro in place and have a blink blink to tel if it is running or not i am using hard were uart chann...

Good day Steve-Matrix & medelec35 Thank you for your response it is highly appreciated I would like to know does this mean that all the variables involved with the calculation preceding this display has to be floats as well or only the answer of the calculation the calculation code is as follows .Te...

Good day BenR Thank you for your response it is highly appreciated So I have read and analyzed what you have directed me to in terms of the wiki and your response and think I have the required items and parts/components list down In terms of hardware: 1. Arduino Uno (I have one on hand) 2. Can Bus s...

Good day Flow code members For the project that I am working on I need to display a . decimal value on a i2c 4x20 LCD variable. from my sensor it gives me distance measurement with a resolution of 0.2 meters so the variable changes as the distance decreases/increase so the value of the variable chan...

Good day I am developing for a client and working with Can Bus and would appreciate some guidance I have a sensor communicating via Can Bus I would like to know the following 1. Is it relay possible to pipe the live data into Flow Code and have my code work with that live data as it comes in Ie.. pr...

Good day p.erasmus Thank you for your time and effort in responding Your observation is correct, however it is because the component property's only gives you a selection between 8Mhz and 20Mhz and no options for any alternatives or costume ones, which was surprising to me because during my hardware...

Good day LeighM Thank you for your response the time and afford is highly appreciated Some bizzy days of Meetings, Paper work and details checks later on the project i have some feed back I would like to start with 1. I noticed that you stated the CheckRx() returns non-zero when a new message is rec...

Good day Leigh I have added two LEDs to the Can Bus Shield on the relevant pins and confirmed all the SPI connections and using the show LEDs function I can definitely alter the state of the LEDs reliably and predictably repeatedly is no problem at all Your assistance and input is highly appreciated...