Hi

Not even after multiple. I knew about second clicking and to add "target" prior, but can't get it to work. I can get for example mqtt to link though so it seems limited to IME (or maybe .39 as I'm not near a .38 to check)

Regards

Hi

Might be the Shiraz, but I can't find anything the IME can "Link To". Tried WLAN and Network Comm variants but no show.

Regards

Hi I'm pretty sure I used mqtt to update TS too, so I'll have a look. It might be an idea once you have api keys working to subscribe to PushingBox. When an alarm is generated it sends a signal to PB, which then sends you an email or Push message or whatever. The tests I did indicated the SR04 Ultra...

Hi

Whilst I know of LEDs not reinitialising when simulation has been stopped and restarted, I've not came across it not responding to being told to switch off at the start.

Perhaps to narrow it down could you set the pins off (e.g. set output of B1 = 0 or such like)?

Regards

Hi This is a link to one of my posts, using an esp8266 to update TS. As mentioned in the post, not a finished chart or anything, just showing "steps" required for me to connect and publish, which may help. Regards PS I've been assisting in a water level project too, one version with ultrasonics, the...

Hi I've used ThingSpeak extensively in the past but I haven't tried the IOT_Made_Easy (or not) component. I usually post data just using the api key but have used the mqtt component too. I've posted plenty on it and like a lot of such things used value pairs for the data. I'll try the IOT component ...

Hi Did a couple of tests today. Set up FC pretty much as the example file using a PIC18877 with trivial modifications to suit. Set up a little test rig to measure distance from sensor to target. Rig holds the sensor at 90' to target, vertically, with very impressive results for such a module and my ...

Hi

The "old" forum is a great source of knowledge going back to stoneage times

Regards

Hi Generally speaking, yes, you can. If you do a search in the forum you will find pleanty of info such as this https://www.matrixtsl.com/mmforums/viewtopic.php?p=106397#p106397 You might also want to include a truly random variable such as a temperature reading or an ADC on a floating pin to help m...

Hi I had a project to monitor tanks (water, not Challenger) and the remote tanks communicated to a "base station" via LoRa. The base station located in the house would then communicate via WiFi / Internet to PushingBox which would subsequently send out Push/email alerts etc. However if the WiFi/Inte...