Hi Ben Creating a file automatically with Flowcode is easy. Generating a file name is also easy. But with 8.3 digits no date and time can be used as filename. Would it be possible in the future to work with long filenames with the Flowcode component? I have found a setting in the ESP32 S3 setup. som...

Hi Ben For the Atom S3 the component gLCD_ST7789V1 is working to display text. The Atom matrix has a 5x5 LED Matrix and it's working with FC WS2812C For the M5 Dial knob I think an additional component for GC9A01A Display driver is necessary. The display is also used by other manufacturers A very go...

Hi to All I found a way to build a webserver. There is just a problem with the display from the "link to" Press the first time, the propertis is empty. Press a second time then you can choose the link. Now I just need to use an additional socket connection to retrieve data with the App developper ! ...

Hi to All Wlan on a ESP32 S3 is simple to config and working nice with Flowcode10. But I have not found a webserver for the ESP32. Is there a component or can one be made? For a socket connection to the App developper would also be nice if there is a demo project. And one more thing. The webserver a...

Hi ben

Link to the specific board:

https://docs.m5stack.com/en/core/AtomS3

Link to a shop:
https://www.digikey.ch/de/products/deta ... 3/17751546

Demo with display (working in SPI softwaremode)

Hi Steve

I suspect it's not that simple.
The USB pins go directly to the ESP32 C3. So I can't use an Rx/TX pin. Many ESP32 boards have a USB driver that goes from the USB connector to the UART pin.

What about BLE Uart? Is BLE already possible to test?

Hi Martin Yes, I do a full database update every time. I only have the components that appear in the project published. Maybe you can take a screen shot of your components, then we can compare we have the same version. But on all my computers I can't compile with SPI hardware. I also did a quick tes...

Hi to All One more question. With purchased hardware with an ESP32-S3, I have to press the reset button for 5 seconds to flash the firmware. Then press the reset button again. The programme runs. Now I want a connection with the USB C connector to the computer. A serial device com15 and also an USB ...

here the msg file from the notebook with IDF-5.13. Compiling is working in spi software mode but not with hardware spi
Here a list of my component.
They should all be up to date

Hi Ben

Sorry Ben, I have post the test program from the ESP32 C3.
Here is the matching ESP32 S3 program and C-code

regards

Stefan

C-Code Program for Atom S3 with display: