Hi,
Coming from PICs...I started reading a bit more on the ESP32. It all looks very Alien having spent 10 years only dipping into Mircochips data sheets.
The official documents seem to lean a lot on their API.
How are API calls made and what is the structure in FC?
As I learn to use the various Functions ofthe ESP32, I'm assuming I will need to read/write/set specific API commands. Like reading back the status of a function.
I did not find any list of registers etc..as I would expect from PICs.
Regards, J.
ESP32 API commands and registers
-
- Posts: 135
- http://meble-kuchenne.info.pl
- Joined: Sun Dec 20, 2020 6:06 pm
- Has thanked: 47 times
- Been thanked: 31 times
-
- Valued Contributor
- Posts: 991
- Joined: Wed Dec 09, 2020 9:37 pm
- Has thanked: 106 times
- Been thanked: 517 times
Re: ESP32 API commands and registers
See my post at https://www.flowcode.co.uk/forums/vie ... =3&t=2203 for a link to the esp32 datasheet..
Also an example of using an api call. Generally it's easier to use the api than the chip hardware which is not too say they are easy - it's a complicated beast...
Martin
Also an example of using an api call. Generally it's easier to use the api than the chip hardware which is not too say they are easy - it's a complicated beast...
Martin