Hi Everyone
Can someone tell me why this will not compile?
Thanks,
Wayne M
Compile problem with ESP WIFI KIT 32
-
- Posts: 94
- http://meble-kuchenne.info.pl
- Joined: Fri Dec 04, 2020 6:12 pm
- Has thanked: 1 time
- Been thanked: 9 times
-
- Valued Contributor
- Posts: 1188
- Joined: Thu Dec 03, 2020 10:57 am
- Has thanked: 289 times
- Been thanked: 418 times
Re: Compile problem with ESP WIFI KIT 32
Hi
It compiles to Hex OK for me, but as I don't have that module I can't check any further. If you could post the errors as Bob suggested then maybe we can help further.
Also it may help to inform if it is just this chart you are having issues with and any other relevant info.
Regards
It compiles to Hex OK for me, but as I don't have that module I can't check any further. If you could post the errors as Bob suggested then maybe we can help further.
Also it may help to inform if it is just this chart you are having issues with and any other relevant info.
Regards
-
- Posts: 94
- Joined: Fri Dec 04, 2020 6:12 pm
- Has thanked: 1 time
- Been thanked: 9 times
Re: Compile problem with ESP WIFI KIT 32
To all,
This is what is see.
ninja: build stopped: subcommand failed.
Checking Python dependencies...
Executing action: all (aliases: build)
Running ninja in directory c:\work\rtc_esp32\build
Executing "ninja all"...
ninja failed with exit code 1
Build Failed
.
Autoclose turned off
FINISHED
Wayne M
This is what is see.
ninja: build stopped: subcommand failed.
Checking Python dependencies...
Executing action: all (aliases: build)
Running ninja in directory c:\work\rtc_esp32\build
Executing "ninja all"...
ninja failed with exit code 1
Build Failed
.
Autoclose turned off
FINISHED
Wayne M
-
- Valued Contributor
- Posts: 998
- Joined: Wed Dec 09, 2020 9:37 pm
- Has thanked: 106 times
- Been thanked: 517 times
Re: Compile problem with ESP WIFI KIT 32
What version FC and espressif tools are you using?
It compiles under v10 (using espressif v5.0) - but only after a doing an update (help->library updates) which updated several of the esp files
Martin
It compiles under v10 (using espressif v5.0) - but only after a doing an update (help->library updates) which updated several of the esp files
Martin
-
- Valued Contributor
- Posts: 763
- Joined: Wed Dec 02, 2020 10:53 am
- Has thanked: 151 times
- Been thanked: 171 times
Re: Compile problem with ESP WIFI KIT 32
Hi Wayne, Hi Martin, Hi Bob
I downloaded your program and somehow I already had an rtc_esp32. So my computer renamed it to RTC_ESP32 (1).fcfx
This gives problems when compiling to hex.
and it compiles to hex without problems.
I changed the file to RTC_ESP32 1.fcfx
and it compiles to hex without problems.
I changed the file to RTC_ESP32(1).fcfx
and error! again
regards
Stefan
I downloaded your program and somehow I already had an rtc_esp32. So my computer renamed it to RTC_ESP32 (1).fcfx
This gives problems when compiling to hex.
Then I changed the file to RTC_ESP32n.fcfx.Running cmake in directory c:\users\kfs-forschung\downloads\rtc_esp32_(1)\build
Executing "cmake -G Ninja -DPYTHON_DEPS_CHECKED=1 -DESP_PLATFORM=1 -DIDF_TARGET=esp32 -DCCACHE_ENABLE=1 c:\users\kfs-forschung\downloads\rtc_esp32_(1)"...
Build Failed
and it compiles to hex without problems.
I changed the file to RTC_ESP32 1.fcfx
and it compiles to hex without problems.
I changed the file to RTC_ESP32(1).fcfx
and error! again
regards
Stefan
-
- Valued Contributor
- Posts: 1188
- Joined: Thu Dec 03, 2020 10:57 am
- Has thanked: 289 times
- Been thanked: 418 times
Re: Compile problem with ESP WIFI KIT 32
Hi
In my earlier post in which it compiled to Hex for me, I was running FCv10 using IDF4.2 and Python 3.8. When opening in FCv9 I'm informed the project was built using a newer version etc (so I guess v10) but still compiled to Hex OK. So between replies it has compiled on known working versions / installs.
As Martin suggests, it would be helpful to know Wayne's FC version and if the database has been fully updated, and which "toolchain" he's using. In addition it would be helpful to know if he's ever successfully compiled.
I'll make sure never to use parenthesis as per Stefan's post
Regards
In my earlier post in which it compiled to Hex for me, I was running FCv10 using IDF4.2 and Python 3.8. When opening in FCv9 I'm informed the project was built using a newer version etc (so I guess v10) but still compiled to Hex OK. So between replies it has compiled on known working versions / installs.
As Martin suggests, it would be helpful to know Wayne's FC version and if the database has been fully updated, and which "toolchain" he's using. In addition it would be helpful to know if he's ever successfully compiled.
I'll make sure never to use parenthesis as per Stefan's post
Regards
-
- Posts: 94
- Joined: Fri Dec 04, 2020 6:12 pm
- Has thanked: 1 time
- Been thanked: 9 times
Re: Compile problem with ESP WIFI KIT 32
Yes fully upto date on line libraries and software I'm running flowcode 10 on a Windows 11 pc.
-
- Valued Contributor
- Posts: 1188
- Joined: Thu Dec 03, 2020 10:57 am
- Has thanked: 289 times
- Been thanked: 418 times
Re: Compile problem with ESP WIFI KIT 32
Hi
What ESP toolchain are you using, and has it ever worked for you?
Regards
What ESP toolchain are you using, and has it ever worked for you?
Regards