Hi,
I have some Mikroelektronika mikroBUS (https://www.mikroe.com/mikrobus) boards which I can connect them to the E-blocks2 through the E-blocks2 mikroBUS adapter, but I am missing the libraries for the components which Mikroelektronika has created. Mikroelektronica has over 900 boards which can be connected to the shields which Matrix TSL is developing, by using the E-blocks2 mikroBUS adapter. For those who know, the creation of these libraries can be done easily, but for beginners like myself, I would prefer to pay for an upgrade module and have the libraries with the components already available in Flowcode.
Is this feature interesting and will be available sometime in future? I would be gladly pay for it.
Andreas
Mikroelektronika (mikroBUS) component libraries
-
- Posts: 10
- http://meble-kuchenne.info.pl
- Joined: Thu Jan 07, 2021 1:42 pm
- Location: Stockholm (SE)
- Has thanked: 4 times
- Been thanked: 1 time
- Contact:
- p.erasmus
- Posts: 434
- Joined: Thu Dec 03, 2020 12:01 pm
- Location: Russia / Россия
- Has thanked: 104 times
- Been thanked: 88 times
Re: Mikroelektronika (mikroBUS) component libraries
Hi,
join FlowcodeXchange ask for the libraries you are desperate for ,there are already some FC components that Support MikroElectronic boards
https://www.flowcodexchange.com/
The mikrobus supports I2C,SPI and Uart there are many components that has one of these interfaces and will directly work with your ME boards
you only need to select the correct MCU channel in the Property settings
Make your need known there and the people could help you
join FlowcodeXchange ask for the libraries you are desperate for ,there are already some FC components that Support MikroElectronic boards
https://www.flowcodexchange.com/
The mikrobus supports I2C,SPI and Uart there are many components that has one of these interfaces and will directly work with your ME boards
you only need to select the correct MCU channel in the Property settings
Make your need known there and the people could help you
Regards Peter - QME Electronics
-
- Valued Contributor
- Posts: 771
- Joined: Wed Dec 02, 2020 10:53 am
- Has thanked: 151 times
- Been thanked: 173 times
Re: Mikroelektronika (mikroBUS) component libraries
Hi Andreas, Hi Peter
I guess I know what Andreas mean.
I did a photo montage.
Who know if Matrix will do this once.
A good news is:
Some modules already working nice and inclusive simulation like
OLed: choose the GLCD_SSD1351component
https://www.mikroe.com/oled-c-click
Network: choose the TCPIP_ENC28J60 component
https://www.mikroe.com/eth-click
I suspect there are a few more.
But the real good news is, that Peter also had a good solution with his service
Hi can very well create components and this component you can download for a small amount.
https://www.flowcodexchange.com/
regards
Stefan
I guess I know what Andreas mean.
I did a photo montage.
Who know if Matrix will do this once.
A good news is:
Some modules already working nice and inclusive simulation like
OLed: choose the GLCD_SSD1351component
https://www.mikroe.com/oled-c-click
Network: choose the TCPIP_ENC28J60 component
https://www.mikroe.com/eth-click
I suspect there are a few more.
But the real good news is, that Peter also had a good solution with his service
Hi can very well create components and this component you can download for a small amount.
https://www.flowcodexchange.com/
regards
Stefan