ILI9163C China model 1.44 " spi 128 x 128 display

Post here to discuss any new features, components, chips, etc, that you would like to see in Flowcode.
Post Reply
solozerouno
Posts: 116
http://meble-kuchenne.info.pl
Joined: Tue Dec 08, 2020 4:36 am
Has thanked: 2 times
Been thanked: 2 times

ILI9163C China model 1.44 " spi 128 x 128 display

Post by solozerouno »

I would like this model added.
The only difference of this cheap china model that they propose as a replacement for the Nokia 5110 display with the model that uses ili9163C spi 160 x 128 pixels, are only the dimensions of 1.44 "and the pixels that are 128 x 128.with some tricks you can partially fool flowcode 9 using the same ili9163 by moving the text down .... You could do a flowcode subroutine converting pixel dimensions from the model to 160 x 128 to 128 x 128 ..... Boh , I do not know you see ..... Thanks Alessandro.
thanks.
solozerouno .

BenR
Matrix Staff
Posts: 1769
Joined: Mon Dec 07, 2020 10:06 am
Has thanked: 450 times
Been thanked: 611 times

Re: ILI9163C China model 1.44 " spi 128 x 128 display

Post by BenR »

Hello,

Is it just that the display your using required a shift so 0,0 on the coords is not 0,0 on the display? We can potentially add new shift properties to allow you to set the amount of shift in the component. I have done this already for other displays.

solozerouno
Posts: 116
Joined: Tue Dec 08, 2020 4:36 am
Has thanked: 2 times
Been thanked: 2 times

Re: ILI9163C China model 1.44 " spi 128 x 128 display

Post by solozerouno »

Yes you should redefine the display to 128 x 128 1.44 ", I repeat from china this product is very popular because it costs almost a third less than the more famous 160 x 128 1.8" both with ILI9163C driver changes only the pixels and when you simulation on flc9 above is empty ....
Thanks Alessandro.

Post Reply