Hello again.
A well-known error is back again,
because the problem itself has not been solved.
All old programmes make the same error. I have tried to eliminate the error as before, but this time it doesn't work either.
Please fix it as soon as possible.
fatal error: CDC_Setup.h: No such file or directory
-
- Posts: 252
- http://meble-kuchenne.info.pl
- Joined: Thu Dec 10, 2020 2:35 pm
- Has thanked: 36 times
- Been thanked: 17 times
-
- Posts: 252
- Joined: Thu Dec 10, 2020 2:35 pm
- Has thanked: 36 times
- Been thanked: 17 times
Re: fatal error: CDC_Setup.h: No such file or directory
Target folder: C:\Users\uwe\Documents\Flowcode Projekte\USBCDC
Source name: C:\Users\uwe\Documents\Flowcode Projekte\USBCDC\Flowcode_cdc_usb.fcfx
Title:
Description:
Device: PIC32.32MZ.32MZ2048EFH100
Generated by: Flowcode v9.2.0.33
Date: Wednesday, November 03, 2021 15:57:03
Users: 1
Registered to: SpeedPic32 (24146314)
Licence key: UCCVMA
NOT FOR COMMERCIAL USE
https://www.flowcode.co.uk
Using <PICkit3 PK3CMD External Power> inbuilt settings for compiler
Launching the compiler...
C:\Program Files (x86)\Flowcode\Compilers\pic32\bin\xc32-gcc.exe -mprocessor=32MZ2048EFH100 -O1 -o "C:\Users\uwe\Documents\Flowcode Projekte\USBCDC\Flowcode_cdc_usb.elf" "C:\Users\uwe\Documents\Flowcode Projekte\USBCDC\Flowcode_cdc_usb.c"
C:\Users\uwe\Documents\Flowcode Projekte\USBCDC\Flowcode_cdc_usb.c:462:23: fatal error: CDC_Setup.h: No such file or directory
^
compilation terminated.
C:\Program Files (x86)\Flowcode\Compilers\pic32\bin\xc32-gcc.exe reported error code 0xFF
Autoclose turned off
FINISHED
Source name: C:\Users\uwe\Documents\Flowcode Projekte\USBCDC\Flowcode_cdc_usb.fcfx
Title:
Description:
Device: PIC32.32MZ.32MZ2048EFH100
Generated by: Flowcode v9.2.0.33
Date: Wednesday, November 03, 2021 15:57:03
Users: 1
Registered to: SpeedPic32 (24146314)
Licence key: UCCVMA
NOT FOR COMMERCIAL USE
https://www.flowcode.co.uk
Using <PICkit3 PK3CMD External Power> inbuilt settings for compiler
Launching the compiler...
C:\Program Files (x86)\Flowcode\Compilers\pic32\bin\xc32-gcc.exe -mprocessor=32MZ2048EFH100 -O1 -o "C:\Users\uwe\Documents\Flowcode Projekte\USBCDC\Flowcode_cdc_usb.elf" "C:\Users\uwe\Documents\Flowcode Projekte\USBCDC\Flowcode_cdc_usb.c"
C:\Users\uwe\Documents\Flowcode Projekte\USBCDC\Flowcode_cdc_usb.c:462:23: fatal error: CDC_Setup.h: No such file or directory
^
compilation terminated.
C:\Program Files (x86)\Flowcode\Compilers\pic32\bin\xc32-gcc.exe reported error code 0xFF
Autoclose turned off
FINISHED
- Attachments
-
- Flowcode_cdc_usb.fcfx
- (7.91 KiB) Downloaded 116 times
-
- 03-11-2021 16-03-45.png (19.24 KiB) Viewed 2076 times
-
- 03-11-2021 16-02-05.png (92.46 KiB) Viewed 2076 times
-
- Posts: 252
- Joined: Thu Dec 10, 2020 2:35 pm
- Has thanked: 36 times
- Been thanked: 17 times
Re: fatal error: CDC_Setup.h: No such file or directory
Hello FC Team
Once again the error concerns the PIC 32 MX and MZ chips.
I am starting a new project
I choose a PIC, e.g. the PIC32MX470.
I choose USB Serial
I enter the initialisation in Main
I start the compilation to hex
I enter a project name
and lo and behold error 0xFF comes up
C:\Program Files (x86)\Flowcode\Compilers\pic32\bin\xc32-gcc.exe reported error code 0xFF
No matter which chip from the MX or MZ series
How can this happen?
Am I the only one with this problem?
Can you check this out, anyone reading this!
It will not take long
For your information: I have always installed all updates and no further projects after the one with the MCP356X.
Please short info
Thanks to all who test this briefly.
Once again the error concerns the PIC 32 MX and MZ chips.
I am starting a new project
I choose a PIC, e.g. the PIC32MX470.
I choose USB Serial
I enter the initialisation in Main
I start the compilation to hex
I enter a project name
and lo and behold error 0xFF comes up
C:\Program Files (x86)\Flowcode\Compilers\pic32\bin\xc32-gcc.exe reported error code 0xFF
No matter which chip from the MX or MZ series
How can this happen?
Am I the only one with this problem?
Can you check this out, anyone reading this!
It will not take long
For your information: I have always installed all updates and no further projects after the one with the MCP356X.
Please short info
Thanks to all who test this briefly.
-
- Posts: 252
- Joined: Thu Dec 10, 2020 2:35 pm
- Has thanked: 36 times
- Been thanked: 17 times
Re: fatal error: CDC_Setup.h: No such file or directory
Hello I have it
in the compiler options was for whatever reason a wrong entry set as default, sorry
in the compiler options was for whatever reason a wrong entry set as default, sorry
-
- Matrix Staff
- Posts: 1746
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 444 times
- Been thanked: 604 times
Re: fatal error: CDC_Setup.h: No such file or directory
Many thanks for letting us know. Glad you got it sorted.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel