Lets get you going with a basic example available from Formula AllCode Resources website.
The following can only be done if the Robot is paired (It won't be connected, so the blue LED should be flashing until step 5 and running with the factory firmware.
It does not matter what mode the Formula Allcode is in, Demo, Test, API etc.
1. Download and extract files from the Flowcode section FA_FC_ProximityAlarmzip file from Formula AllCode Resources.
The project file we are interested in is called ProximityAlarm_v10.fcsx as that will allow you to directly communicate with Bluetooth!
2. determine the correct COM port to use by entering within the windows search box
Code: Select all
rundll32.exe shell32.dll,Control_RunDLL bthprops.cpl,,2
3. Make a note of the COM that the Direction shows Outgoing 4. Open ProximityAlarm_v10.fcsx, within properties of FormulaAllCodeAPI1, set the COM port to the same as Outgoing.
In my case its 31
5. Select Debug > Run THe Blue LEDshould now be solid.
place your figer near the front middle sensor and oyur PC will play the audio speech within the RealSpeak function.
In this case "Hello"
Can you let me know if it all works for you please?
I just obtained a Formula AllCode from stock today, and the above is working perfectly.
It's what Steve has been saying.
Your Formula AllCode will be paired, but not connected, until it's accessed by a 3rd party app that's connected to the buggy's COM port,