Hello;
I have a question. Does FC V11 support the Q20/Q41 family? I’ve purchased every version of Flowcode since V4. I haven’t purchased FC V11 yet, as I get the impression that support for ESPs is now being developed more extensively than for PICs. However, I bought Flowcode as a development environment for PICs, as it was originally advertised. Is the Q20/Q41 family fully supported by Flowcode V11, as stated in the advertising?
Thanks,
Dirk
Support for the Q20/Q41 family
-
DirkB
- Posts: 115
- http://meble-kuchenne.info.pl
- Joined: Thu Dec 10, 2020 3:55 pm
- Has thanked: 1 time
- Been thanked: 4 times
-
Steve-Matrix
- Matrix Staff
- Posts: 1985
- Joined: Sat Dec 05, 2020 10:32 am
- Has thanked: 296 times
- Been thanked: 459 times
Re: Support for the Q20/Q41 family
Hi Dirk,
Thanks for your question and for being part of Flowcode's journey for so long!
Current supported chips can be found on this page:
https://www.flowcode.co.uk/embedded/targets/
You can filter for those devices by typing "q2" or "q4" into the textbox at the bottom of the "Device" column. There are several Q20 and Q41 devices supported there.
We will continue to support PIC devices alongside the ESP32 and other families.
Thanks for your question and for being part of Flowcode's journey for so long!
Current supported chips can be found on this page:
https://www.flowcode.co.uk/embedded/targets/
You can filter for those devices by typing "q2" or "q4" into the textbox at the bottom of the "Device" column. There are several Q20 and Q41 devices supported there.
We will continue to support PIC devices alongside the ESP32 and other families.