Hello Ben,
Package is on the way
Greetings
MCP3561/2/4 MCP3564 Click Board
-
- Posts: 257
- http://meble-kuchenne.info.pl
- Joined: Thu Dec 10, 2020 2:35 pm
- Has thanked: 36 times
- Been thanked: 17 times
-
- Posts: 257
- Joined: Thu Dec 10, 2020 2:35 pm
- Has thanked: 36 times
- Been thanked: 17 times
-
- Matrix Staff
- Posts: 1762
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 447 times
- Been thanked: 607 times
Re: MCP3561/2/4 MCP3564 Click Board
Hello,
I've just checked the goods in and can't find anything for me so looks like it's not arrived yet. Should it have?
I've just checked the goods in and can't find anything for me so looks like it's not arrived yet. Should it have?
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
-
- Matrix Staff
- Posts: 1762
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 447 times
- Been thanked: 607 times
Re: MCP3561/2/4 MCP3564 Click Board
I got the module today thanks for that.
I'll have a go and see if I can make it play nicely.
I'll have a go and see if I can make it play nicely.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
-
- Matrix Staff
- Posts: 1762
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 447 times
- Been thanked: 607 times
Re: MCP3561/2/4 MCP3564 Click Board
Hello,
I've spent a significant amount of time investigating this devie today to see if I can make it work nicely.
No matter what I do the sign bit of the ADC conversion is a 1 and so I always get a negative output value.
I'll park it for a bit and come back to it next time I have some free time and see if I can move it on at all.
I've spent a significant amount of time investigating this devie today to see if I can make it work nicely.
No matter what I do the sign bit of the ADC conversion is a 1 and so I always get a negative output value.
I'll park it for a bit and come back to it next time I have some free time and see if I can move it on at all.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
-
- Posts: 257
- Joined: Thu Dec 10, 2020 2:35 pm
- Has thanked: 36 times
- Been thanked: 17 times
- p.erasmus
- Posts: 434
- Joined: Thu Dec 03, 2020 12:01 pm
- Location: Russia / Россия
- Has thanked: 104 times
- Been thanked: 88 times
Re: MCP3561/2/4 MCP3564 Click Board
Hi Ben.
Sorry if I am wrong(did not check the datasheet) however the Ti 16 and 24bit ADC's) the results are in the 2's compliment and need to be converted to get the correct value may it is something similar in the microchip 24 bit ADC
Sorry if I am wrong(did not check the datasheet) however the Ti 16 and 24bit ADC's) the results are in the 2's compliment and need to be converted to get the correct value may it is something similar in the microchip 24 bit ADC
Regards Peter - QME Electronics
-
- Posts: 257
- Joined: Thu Dec 10, 2020 2:35 pm
- Has thanked: 36 times
- Been thanked: 17 times
Re: MCP3561/2/4 MCP3564 Click Board
Hi p.erasmus
Here is the data sheet
From here on it gets interesting ! 5.6 ADC Output Data Format
It would be nice if you could manage that.
greetings SpeedPIC32
Here is the data sheet
From here on it gets interesting ! 5.6 ADC Output Data Format
It would be nice if you could manage that.
greetings SpeedPIC32
- Attachments
-
- MCP3561-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-24-Bit-Delta-Sigma-ADCs-DS20006181B.pdf
- (1.99 MiB) Downloaded 177 times
- p.erasmus
- Posts: 434
- Joined: Thu Dec 03, 2020 12:01 pm
- Location: Russia / Россия
- Has thanked: 104 times
- Been thanked: 88 times
Re: MCP3561/2/4 MCP3564 Click Board
Hi.
Thank you for the datasheet as I expected it does support various dataformats and it seems in 24bit mode it is 2's compliment format.
however to really move and convert the adc values to real world values you need a device to test on which I do not have , I am confident that Ben will solve this issue it does require some extensive development time .
We did some components for these High Resolution ADC's and we know the time it takes to develop them and we realized that people refuse to pay 4.5 pounds for such a component so we stopped the develop such complex components.
Hope this will get sorted shortly
Thank you for the datasheet as I expected it does support various dataformats and it seems in 24bit mode it is 2's compliment format.
however to really move and convert the adc values to real world values you need a device to test on which I do not have , I am confident that Ben will solve this issue it does require some extensive development time .
We did some components for these High Resolution ADC's and we know the time it takes to develop them and we realized that people refuse to pay 4.5 pounds for such a component so we stopped the develop such complex components.
Hope this will get sorted shortly
Regards Peter - QME Electronics
-
- Posts: 257
- Joined: Thu Dec 10, 2020 2:35 pm
- Has thanked: 36 times
- Been thanked: 17 times
Re: MCP3561/2/4 MCP3564 Click Board
Hello
I have downloaded the following file from Mikroe Libstock.
it contains routines/drivers for this chip.
It might be quite helpful.
greetings SpeedPic32
I have downloaded the following file from Mikroe Libstock.
it contains routines/drivers for this chip.
It might be quite helpful.
greetings SpeedPic32
- Attachments
-
- 4274_adc_9_click.zip
- (640.61 KiB) Downloaded 178 times