Afternoon All,
Downloaded this module and started to read through the content. It talked of a CD with all the examples on it. Can this be downloaded anywhere ?
Regards
Steve
Imbedded Internet Course
-
- Valued Contributor
- Posts: 185
- http://meble-kuchenne.info.pl
- Joined: Wed Jan 13, 2021 7:15 pm
- Has thanked: 81 times
- Been thanked: 30 times
-
- Valued Contributor
- Posts: 1281
- Joined: Thu Dec 03, 2020 10:57 am
- Has thanked: 312 times
- Been thanked: 452 times
-
- Matrix Staff
- Posts: 1355
- Joined: Sat Dec 05, 2020 10:32 am
- Has thanked: 182 times
- Been thanked: 317 times
Re: Imbedded Internet Course
Hi Steve - which module are you referring to? Do you mean the Embedded Internet course on this page?
https://www.flowcode.co.uk/education/
I have asked my colleagues if these are available and will let you know...
-
- Matrix Staff
- Posts: 1355
- Joined: Sat Dec 05, 2020 10:32 am
- Has thanked: 182 times
- Been thanked: 317 times
-
- Valued Contributor
- Posts: 185
- Joined: Wed Jan 13, 2021 7:15 pm
- Has thanked: 81 times
- Been thanked: 30 times
Re: Imbedded Internet Course
Morning All,
I am Looking at using a couple of ECIO 40p's / 28p's & ENC28J60 breakout boards to experiment and do the examples with.
Am i likely to experience any issues / run into problems with these ?
https://hobbycomponents.com/wired-wirel ... ork-module
Steve
I am Looking at using a couple of ECIO 40p's / 28p's & ENC28J60 breakout boards to experiment and do the examples with.
Am i likely to experience any issues / run into problems with these ?
https://hobbycomponents.com/wired-wirel ... ork-module
Steve
-
- Valued Contributor
- Posts: 407
- Joined: Mon Dec 07, 2020 1:00 pm
- Has thanked: 76 times
- Been thanked: 223 times
Re: Imbedded Internet Course
Hi Steve,
The Matrix Embedded Internet course and examples use the W5500 (WIZ Click board) so you will likely find it easier if you use the same.
The ENC28J60 is cheaper, but needs more software to drive it.
Hope that helps
Leigh
The Matrix Embedded Internet course and examples use the W5500 (WIZ Click board) so you will likely find it easier if you use the same.
The ENC28J60 is cheaper, but needs more software to drive it.
Hope that helps
Leigh