ESP32 Compiling error

LeighM
Valued Contributor
Posts: 287
http://meble-kuchenne.info.pl
Joined: Mon Dec 07, 2020 1:00 pm
Has thanked: 42 times
Been thanked: 108 times

Re: ESP32 Compiling error

Post by LeighM »

Could you try creating the Flowcode project in a directory path that does not contain spaces.
Try somewhere on drive F: if you can.

stefan.erni
Valued Contributor
Posts: 339
Joined: Wed Dec 02, 2020 10:53 am
Has thanked: 85 times
Been thanked: 92 times

Re: ESP32 Compiling error

Post by stefan.erni »

Hi to All

I have on a (new) pc the same problem

I used
esp-idf-tools-setup-offline-2.10
The instalation was without an error

But it cant fount the Python

regards

Stefan
error2.JPG
error2.JPG (38.54 KiB) Viewed 1667 times

stefan.erni
Valued Contributor
Posts: 339
Joined: Wed Dec 02, 2020 10:53 am
Has thanked: 85 times
Been thanked: 92 times

Re: ESP32 Compiling error

Post by stefan.erni »

I run the ESP Command
test.JPG
test.JPG (124.63 KiB) Viewed 1667 times

jollybv
Posts: 102
Joined: Mon Mar 08, 2021 11:25 am
Location: Cape Town South Africa
Has thanked: 32 times
Been thanked: 9 times

Re: ESP32 Compiling error

Post by jollybv »

Hi Ben

I think i found the problem the esp-idf-tools folder it was loading into the esp-idf-tools\.espressif when i changed that and took out the \.espressif it now works.
As I'm very new to this esp32 I have now compiled a simple blinker app to try get every thing going but it fails i'm not sure if it could be the board rate which is set at 115200 i'm not sure where i can change this to check
esp compile failed.png
esp compile failed.png (104.09 KiB) Viewed 1660 times
ESP32_Blinker.fcfx
(7.82 KiB) Downloaded 49 times

medelec35
Matrix Staff
Posts: 692
Joined: Wed Dec 02, 2020 11:07 pm
Has thanked: 242 times
Been thanked: 244 times

Re: ESP32 Compiling error

Post by medelec35 »

Hi, Brian.
That looks like a communication issue between your PC and ESP32board.
Have you checked within the device manager to see if your board can be seen within the Ports (COM & LPT) section?
With some boards I have, there was a need to press the reset button on the board before it would program.
Have you selected the ESP32 Programmer Port within project options?
Martin

jollybv
Posts: 102
Joined: Mon Mar 08, 2021 11:25 am
Location: Cape Town South Africa
Has thanked: 32 times
Been thanked: 9 times

Re: ESP32 Compiling error

Post by jollybv »

Hi, guys

Thanks for all the help I now have a blinking board so we up and running, the reason that it was not communicating is that i had a bridge on the development board pulling RX down just one question do i need to put the C code with OSCCON=0x50; in the beginning of my esp32 projects? and another thing do I set the clock speed in project options to 240Mhz or 40Mhz

LeighM
Valued Contributor
Posts: 287
Joined: Mon Dec 07, 2020 1:00 pm
Has thanked: 42 times
Been thanked: 108 times

Re: ESP32 Compiling error

Post by LeighM »

do i need to put the C code with OSCCON=0x50
No
do I set the clock speed in project options to 240Mhz or 40Mhz
240MHz, but I don't think it matters, the delays are done by the OS

stefan.erni
Valued Contributor
Posts: 339
Joined: Wed Dec 02, 2020 10:53 am
Has thanked: 85 times
Been thanked: 92 times

Re: ESP32 Compiling error

Post by stefan.erni »

Hi to All

On my computer it's working after I started the following batch file (again)

Desktop\esp-idf\install.bat

@jollybv I hope you have a lot of fun with the ESP32 like me. Together with the Appdevelopper you have so many options to connect and use the ESP32.

regards

Stefan

stefan.erni
Valued Contributor
Posts: 339
Joined: Wed Dec 02, 2020 10:53 am
Has thanked: 85 times
Been thanked: 92 times

Re: ESP32 Compiling error

Post by stefan.erni »

Hi Ben

On a second computer I have again this Python is not installed problem even the test give a OK.

In this computer it does not help to run the install.bat again

regards

Stefan
C:\ProgramData\MatrixTSL\FlowcodeV9\FCD\ESP\Batch\esp32_build.bat "C:\esp-idf\" "test_install" "C:\FC9_esp32\4install\" esp32s_sdkconfig

C:\FC9_esp32\4install>REM CRC: 0796FC1E6A776AF9156B257209C35258CE7C28B3EC20AEA2C632DB392A0E4BFD5B3F53B21811978F7B21FE4085045A7E774D1D3D69D8A99EE7320EAE740A5DB6FE0D8D4660AC0314F98C28BCA92AF856EFD1DB5B777140BC4D00059D795899827D9F76D89626FBC8B199900461C78937B42DEF8219F63A24580137A2F6C8FDB7553324EFF791947E8AB6FFD612B81BAA97C798A8F1CFC189DE5D38517747C774AF2DD6F839BAECF83F7F994C7164CE77868F480396BDEF2F2C3050DA273BE4EE6FE0BB589D1229A5E37B217FF86DBD72A01B8FBC49BE02BFA3608A0B0CE69F969622A912E6E6A2FB

C:\FC9_esp32\4install>REM REVISION: 4.0

C:\FC9_esp32\4install>REM GUID: 955EA920-4961-4C53-BA6B-EF4AF66BB4C2

C:\FC9_esp32\4install>REM DATE: 29\03\2021

C:\FC9_esp32\4install>REM DIR: FCD\ESP\Batch\esp32_build.bat
Building test_install ...

Error: The following tools are not installed in your environment.

python


Please use the Windows Tool installer for setting up your environment.
Download link: https://dl.espressif.com/dl/esp-idf/
For more details please visit our website: https://docs.espressif.com/projects/esp ... setup.html
'idf.py' is not recognized as an internal or external command,
operable program or batch file.

Build Failed

C:\ProgramData\MatrixTSL\FlowcodeV9\FCD\ESP\Batch\esp32_build.bat reported error code 0x1

Autoclose turned off


FINISHED
Attachments
Ok.JPG
Ok.JPG (95.6 KiB) Viewed 1569 times

LeighM
Valued Contributor
Posts: 287
Joined: Mon Dec 07, 2020 1:00 pm
Has thanked: 42 times
Been thanked: 108 times

Re: ESP32 Compiling error

Post by LeighM »

Hi,
Could you run the ESP-IDF command prompt, then type

Code: Select all

export

Post Reply