Again, after update this afternoon the ILI9341, ili9488 and the ST7796 with ESP32 not working again
Jorgen
Ilidisplay after latest update!
-
- Posts: 621
- http://meble-kuchenne.info.pl
- Joined: Thu Dec 03, 2020 8:25 pm
- Location: Denmark
- Has thanked: 510 times
- Been thanked: 132 times
-
- Matrix Staff
- Posts: 1475
- Joined: Wed Dec 02, 2020 11:07 pm
- Has thanked: 522 times
- Been thanked: 477 times
Re: Ilidisplay after latest update!
Hello Jorgen.
We are really sorry, that the latest update breaks things, but they are done for a very good reason.
The updates will cause pins to change.
Can you please change the component pins back to where they were, prior to today's update.
We are really sorry, that the latest update breaks things, but they are done for a very good reason.
The updates will cause pins to change.
Can you please change the component pins back to where they were, prior to today's update.
Martin
-
- Posts: 621
- Joined: Thu Dec 03, 2020 8:25 pm
- Location: Denmark
- Has thanked: 510 times
- Been thanked: 132 times
Re: Ilidisplay after latest update!
Hi Martin!
I got a chock I have some project with these display and device I still working on, and suddently not working and every time there are a new update I check to see if it still is possible to compile
I change the pin, and on the "highspeed mode" they work again, but I have my most inportan project I made before Ben speed up these display where I use other pinnumber, this will not compile even after have change the pin as before update.
To be sure I have a PC where I still not have perform the latest update I compare all the pin. Please have look.
I got a chock I have some project with these display and device I still working on, and suddently not working and every time there are a new update I check to see if it still is possible to compile
I change the pin, and on the "highspeed mode" they work again, but I have my most inportan project I made before Ben speed up these display where I use other pinnumber, this will not compile even after have change the pin as before update.
To be sure I have a PC where I still not have perform the latest update I compare all the pin. Please have look.
- Attachments
-
- NewSun.msg.txt
- (48.31 KiB) Downloaded 115 times
-
- NewSun.fcfx
- (189.38 KiB) Downloaded 113 times
-
- Matrix Staff
- Posts: 1767
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 449 times
- Been thanked: 609 times
Re: Ilidisplay after latest update!
Hello,
Many apologies for that, hopefully now fixed for you.
Many apologies for that, hopefully now fixed for you.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel