Invert outs in standart components
-
- Posts: 11
- http://meble-kuchenne.info.pl
- Joined: Thu Nov 02, 2023 12:29 pm
- Has thanked: 1 time
Invert outs in standart components
I am reprogramming finished device, so i can not change scheme, to control led display i use component from library Displays: 7segment(single) he use low and high for in and out. But me need both low for in and out
- Attachments
-
- ezgif-5-df84041133.png (19.52 KiB) Viewed 4785 times
-
- ezgif-5-c9da3ba5d1.gif (1.78 MiB) Viewed 4785 times
-
- Matrix Staff
- Posts: 1481
- Joined: Wed Dec 02, 2020 11:07 pm
- Has thanked: 525 times
- Been thanked: 481 times
Re: Invert outs in standart components
Sorry, we can't help you on these forums as they are for Flowcode v9 and v10 only.
You will need to post on these forums.
Have you thought about upgrading to version 10 as all the components are now free.
There are some free devices as well!
You can download v10 from here
You will need to post on these forums.
Have you thought about upgrading to version 10 as all the components are now free.
There are some free devices as well!
You can download v10 from here
Martin
Re: Invert outs in standart components
Medelec however thx a lot =D I found your solution there with swich off common pin and adding Output pin control =D
Now all work, thanks a lot again =D
- Attachments
-
- ezgif-5-3aea2ad1fc.gif (910.35 KiB) Viewed 4750 times