Hello,
I downlload and install ESP toolchain for ESP32 but when I try to compile the project I always see: visit site and download toolchain. What can I do?
ESP toolchain do not accepted in FC V9
-
- Posts: 143
- http://meble-kuchenne.info.pl
- Joined: Tue Oct 19, 2021 9:31 am
- Has thanked: 73 times
- Been thanked: 5 times
-
- Matrix Staff
- Posts: 1491
- Joined: Wed Dec 02, 2020 11:07 pm
- Has thanked: 536 times
- Been thanked: 485 times
Re: ESP toolchain do not accepted in FC V9
Hello.
You need to follow page 8 (Flowcode Configuration) In the ESP Installation Instructions
You need to follow page 8 (Flowcode Configuration) In the ESP Installation Instructions
Martin
-
- Valued Contributor
- Posts: 798
- Joined: Wed Dec 02, 2020 10:53 am
- Has thanked: 157 times
- Been thanked: 185 times
-
- Matrix Staff
- Posts: 1491
- Joined: Wed Dec 02, 2020 11:07 pm
- Has thanked: 536 times
- Been thanked: 485 times
Re: ESP toolchain do not accepted in FC V9
Hi Sergejs.
Can you also post your Project name.msg.txt file
Unfortunately, screenshots like the one you posted does not help us to help you at all.
Most issues are caused by using a later-than-suggested version of ESP-IDF.
Take a look at this post.
Can you also post your Project name.msg.txt file
Unfortunately, screenshots like the one you posted does not help us to help you at all.
Most issues are caused by using a later-than-suggested version of ESP-IDF.
Take a look at this post.
Martin
Re: ESP toolchain do not accepted in FC V9
Hi, this is file you ask.
- Attachments
-
- ESP32.msg.txt
- (19.67 KiB) Downloaded 86 times
Re: ESP toolchain do not accepted in FC V9
How I understand there is not compatible with V9 or compiler wrong.
-
- Matrix Staff
- Posts: 1786
- Joined: Mon Dec 07, 2020 10:06 am
- Has thanked: 455 times
- Been thanked: 621 times
Re: ESP toolchain do not accepted in FC V9
Hello,
It looks like you are using the latest ESP-IDF (5.0) which is not supported, we recommend using version 4.1 in the installation guide.
There is a way to roll back the IDF which we document here.
viewtopic.php?p=9222#p9222
We are investigating adding support for the latest version but a lot of things has changed and so needs to be done in a careful way to avoid breaking functionality.
It looks like you are using the latest ESP-IDF (5.0) which is not supported, we recommend using version 4.1 in the installation guide.
There is a way to roll back the IDF which we document here.
viewtopic.php?p=9222#p9222
We are investigating adding support for the latest version but a lot of things has changed and so needs to be done in a careful way to avoid breaking functionality.
Regards Ben Rowland - MatrixTSL
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel
Flowcode Online Code Viewer (Beta) - Flowcode Product Page - Flowcode Help Wiki - My YouTube Channel