Invert outs in standart components

[user2006]

I am reprogramming finished device, so i can not change scheme, to control led display i use component from library Displays: 7segment(single) he use low and high for in and out. But me need both low for in and out

[medelec35]

Hello.
Can you attach your project.
Selecting common low and common anode should work as the segments will be low to enable.

[user2006]

Hello.
Can you attach your project.

Hello =)

[medelec35]

What version of Flowcode are you using?

[user2006]

8

[medelec35]

Sorry, we can't help you on these forums as they are for Flowcode v9 and v10 only.
You will need to post on these forums.

Have you thought about upgrading to version 10 as all the components are now free.
There are some free devices as well!
You can download v10 from here

[user2006]

Sorry, we can't help you on these forums as they are for Flowcode v9 and v10 only.
You will need to post on these forums.

Medelec however thx a lot =D I found your solution there with swich off common pin and adding Output pin control =D
Now all work, thanks a lot again =D