Hi ,
This should be a very easy to do add
Uart Baud rate can be set programmatically but is missing the 600 Baud rate
is there any chance this could be added or even better make it custom baud rate.
I am using Flowcode V9
Thanks
UART baud rate
-
- Posts: 126
- http://meble-kuchenne.info.pl
- Joined: Thu Dec 03, 2020 7:23 pm
- Has thanked: 37 times
- Been thanked: 17 times
-
- Valued Contributor
- Posts: 1149
- Joined: Thu Dec 03, 2020 10:57 am
- Has thanked: 285 times
- Been thanked: 412 times
Re: UART baud rate
Hi
V9 does have a custom option. In the UART properties, select Baud>Custom and you can set it to whatever. Do note that depending on your clock speed you may not be able to achieve every speed you may like.
I've not personally use the feature but it is there.
Hope this helps,
Regards
V9 does have a custom option. In the UART properties, select Baud>Custom and you can set it to whatever. Do note that depending on your clock speed you may not be able to achieve every speed you may like.
I've not personally use the feature but it is there.
Hope this helps,
Regards
Re: UART baud rate
HI , Thanks for your reply ,
Yes it there , but i was referring changing baud when code is running
this feature is already there but it dose not have the 600 option
it begins from 1200
Yes it there , but i was referring changing baud when code is running
this feature is already there but it dose not have the 600 option
it begins from 1200
-
- Valued Contributor
- Posts: 1149
- Joined: Thu Dec 03, 2020 10:57 am
- Has thanked: 285 times
- Been thanked: 412 times
Re: UART baud rate
Hi
Sorry, missed that part.
I guess perhaps a C-Block could perhaps resolve?
Regards
Sorry, missed that part.
I guess perhaps a C-Block could perhaps resolve?
Regards
Re: UART baud rate
Here is the code For changing the baud
Thanks to LeighM
regards
Code: Select all
MX_UART_NUMBER_1.Init.BaudRate = 600;
regards