Difference between revisions of "Components"

General Input
Grey Code Encoder	3d
Grey Code Encoder 2D	2d
IO Expander (MCP23017)	2d
IO Expander (MCP23S17)	2d
IO Expander (PCF8574)	2d
IO Expander (PCF8575)	2d
Quadrature Encoder	3d
Quadrature Encoder 2D	2d
Analog Input
ADC (AD7680)	2d
ADC (MCP356X)	2d
ADC QUAD + DAC (PCF8591)	2d
ADC Template	2d
ADC Template 2D	2d
Joystick (Sparkfun Quiic)	3d
Joystick (Sparkfun Quiic) 2D	2d
Potentiometer	2d
Potentiometer (Slider)	2d
Switch
Rotary Switch	3d
Switch (Microswitch)	3d
Switch Push Button	2d
Switch Rotary 0 - 1	2d
Switch Rotary 0 - 15	2d
Switch Slide	2d
Switch User Images	2d
Switches
Switch Array (Push)	3d
Switch Array (Push) 2D	2d
Switch Array (Slide)	3d
Switch Array (Slide) 2D	2d
Keypad
Keypad	2d
Keypad (Cursor 3x3)	2d
Keypad (Hex 4x4)	2d

General Output
IO Expander (MCP23017)	2d
IO Expander (MCP23S17)	2d
IO Expander (PCF8574)	2d
IO Expander (PCF8575)	2d
PWM (Internal)	2d
PWM 16CH 12Bit (PCA9685)	2d
Relay (Grove 103020005)	2d
Analog Output
ADC QUAD + DAC (PCF8591)	2d
DAC (AD5662)	2d
DAC (Internal)	2d
DAC (MCP4725)	2d
DAC (MCP47x6)	2d
DAC (MCP48x1)	2d
DAC (MCP49x1)	2d
DAC Dual (MCP48x2)	2d
DAC Dual (MCP49x2)	2d
DAC Quad (MCP4728)	2d
Digital Potentiometer (MCP41XX / MCP42XX)	2d
Digital Potentiometer (MCP41XXX / MCP42XXX)	2d
Digital Potentiometer (MCP44XX)	2d
Digital Potentiometer (MCP45XX / MCP46XX)	2d
Digital Potentiometer (X9Cx0x)	2d
Audio Output
Buzzer	2d
DFPlayer (MP3 / WAV)	2d
Piezo Sounder	2d
Speech (Phoneme)	2d
WAV Library File	2d
LED
LED Mono	2d
LED Mono Custom	2d
LED Mono User Images	2d
LED MultiColour Bi (5mm, PCB)	3d
LED MultiColour Tri (5mm, PCB)	3d
LEDs
Chainable RGB LED v2.0 (Grove 104020048)	3d
LED Array	2d
LED Bar v2.0 (Grove 104020006)	3d
LED Charlieplex	2d
LED Matrix	2d
LED Matrix (Parallel)	3d
LED Matrix (Serial)	3d
RGB LED APA102C	3d
RGB LED LP5030 LP5036	3d
RGB LED SK6812 RGBW	3d
RGB LED WS2801	3d
RGB LED WS2811 / WS2812 / APA106	3d
Mechatronics
Coupling	3d
DC Motor	2d
Gearbox	3d
Grove I2C Motor Driver	2d
Kinematics Arm	3d
Linear Actuator	3d
Servo Motor	2d
Servo Motor Controller	2d
Solenoid DC	2d
Stepper Motor	2d

Segment
4-Digit Display (Grove 104030003)	3d
4-Digit Display (Grove 104030003) 2D	2d
7Segment (74HC595)	3d
7Segment (74HC595) 2D	2d
7Segment (Hex TM1637)	3d
7Segment (Hex TM1637) 2D	2d
7Segment (Quad TM1637)	3d
7Segment (Quad TM1637) 2D	2d
7Segment (Quad)	3d
7Segment (Quad) 2D	2d
7Segment (Single)	3d
7Segment (Single)	2d
Starburst Display	3d
Starburst Display	2d
Alphanumeric
LCD (Adafruit, 16x2)	2d
LCD (Adafruit, 20x4)	2d
LCD (Generic, 16x2)	2d
LCD (Generic, 20x4)	2d
LCD (Generic, Configurable)	2d
LCD (Grove - I2C)	2d
LCD (Grove - UART)	2d
LCD (ST7032i)	2d
LCD I2C (Backpack)	2d
LCD I2C (LCM1602)	2d
LCD SPI (MiniClick)	2d
Graphical Color
GLCD (4D Goldelox)	2d
GLCD (4D Picaso v1)	2d
GLCD (4D Picaso v2)	2d
GLCD (GC9A01A SPI)	2d
GLCD (ILI9163C)	2d
GLCD (ILI9341 SPI)	2d
GLCD (ILI9341)	2d
GLCD (ILI9488 SPI)	2d
GLCD (ILI9488)	2d
GLCD (LS020)	2d
GLCD (SSD1289)	2d
GLCD (SSD1331)	2d
GLCD (SSD1351 SPI)	2d
GLCD (SSD1351)	2d
GLCD (SSD1963) Parallel	2d
GLCD (ST7789V)	2d
GLCD (ST7796 SPI)	2d
GLCD (STM32F429ZI)	2d
GLCD (STM32F469NI)	2d
GLCD (STM32F746NG)	2d
Nextion Display	2d
Raspberry Pi HDMI	2d
Graphical Monochrome
GLCD (Grove OLED)	2d
GLCD (KS0108)	2d
GLCD (PDC8544)	2d
GLCD (SH1106) I2C	2d
GLCD (SH1106) SPI	2d
GLCD (SSD1305)	2d
GLCD (SSD1305) Buffered	2d
GLCD (SSD1306)	2d
GLCD (SSD1306) Buffered	2d
GLCD (SSD1306) I2C	2d
GLCD (SSD1322) Buffered	2d
GLCD (SSD1322) Parallel	2d
GLCD (SSD1327) I2C	2d
GLCD (SSD1327) SPI	2d
GLCD (ST7036) I2C	2d
GLCD (ST7565R) Parallel	2d
GLCD (ST7565R) SPI	2d
GLCD (ST7920) Parallel	2d
GLCD (T6963C)	2d
GLCD (TLS8201)	2d
GLCD (UC1701)	2d
GLCD eINK (IL3829)	2d
Graphical Library
Display Manager	2d
GLCD Bitmap Drawer FAT	2d
GLCD Bitmap Drawer ROM	2d
GLCD Graph Creator	2d
GLCD Graph Creator XY	2d
GLCD QR Code Generator	2d
GLCD Textfield	2d
ResistiveTouch	2d
Touch Screen (FT6X06)	2d
Touch Screen (GT911)	2d
Touch Screen (XPT2046)	2d

Audio
Heelight Sensor (Grove 101020312)	2d
Sound Sensor (Grove 101020023)	2d
Ultrasonic (HCSR04)	2d
Ultrasonic Ranger (Grove 101020010)	2d
Electrical
Current Sensor (ACS7xx)	2d
Energy Monitor (PZEM-004T)	2d
LTSR Current Transducer	2d
Environmental
Air Quality (BME688)	2d
Analogue Temp Sensors	2d
Barometer (BME280)	2d
Barometer (BMP180)	2d
Barometer (BMP280 / Grove 101020192)	2d
Barometer (DPS310)	2d
Barometer (MS5637)	2d
Magnetometer (BMM150)	2d
Pulse Oximeter (Max30100)	2d
Temp / Humidity (AHT10)	2d
Temp / Humidity (DHT11)	2d
Temp / Humidity (DHT22)	2d
Temp / Humidity (Grove 101020019)	2d
Temp / Humidity (Grove 101020212)	2d
Temp / Humidity (HTS221)	2d
Temp / Humidity (SHT21)	2d
Temp / Humidity (SHT31)	2d
Temperature (DS1822)	2d
Temperature (DS18B20)	2d
Temperature (DS18S20)	2d
Temperature (LM75B)	2d
Temperature Infrared (Grove 101020062)	2d
Temperature Sensor (Grove 101020015)	2d
Thermistor	2d
Thermocouple (MAX31855)	2d
Thermocouple (MAX31856)	2d
Thermocouple (MCP960X)	2d
Water Sensor (Grove 101020018)	2d
Force
Load Cell (HX711)	2d
Light
Ambient Light	2d
Beam Breaker	3d
Colour Sensor	3d
Colour Sensor (Grove 101020341)	3d
Infrared Array AMG88xx	2d
Infrared Reflective Sensor (Grove 101020174)	3d
Light Sensor (Grove 101020132)	2d
PIR Motion (Grove 101020020)	2d
Photo Reflector	3d
Photo Reflector 2D	2d
Photo Transistor	3d
Photo Transistor 2D	2d
Range Time of Flight (VL53L0X)	2d
Magnetic
Hall Effect Analog	2d
Hall Effect Digital	3d
Reed Switch	3d
Movement Orientation
Accel / Gyro / Mag 9-Axis (LSM9DS1)	2d
Accel / Gyro / Mag 9-Axis (MPU9250)	2d
Accel / Gyro 6-Axis (Grove 105020012)	2d
Accel / Gyro 6-Axis (MPU-6050)	2d
Accel / Gyro 6-Axis (MPU-6886)	2d
Accel / Mag 6-Axis (LSM303D)	2d
Accel / Mag 6-Axis (LSM303DLHC)	2d
Accelerometer 3-Axis (LIS3DHTR)	2d
Accelerometer 3-Axis (LIS3LV02DQ)	2d
Accelerometer 3-Axis (MMA8452Q)	2d
Gyroscope 3-Axis (L3G4200D)	2d
Gyroscope 3-Axis I2C (L3GD20)	2d
Gyroscope 3-Axis SPI (L3GD20)	2d
Magnetometer (SM324)	2d
Magnetometer 3-Axis (HMC5883L)	2d
Magnetometer 3-Axis (QMC5883L)	2d
Wii Nunchuk	2d

Buffer
Circular Buffer (16-bit)	2d
Circular Buffer (8-bit)	2d
Circular Buffer (Float)	2d
EEPROM
EEPROM	2d
EEPROM (DS28E07)	2d
Flash EEPROM	2d
IButton (DS1990)	2d
Serial EEPROM (24C01 - 24C16)	2d
Serial EEPROM (24C32)	2d
Serial EEPROM (24LC512)	2d
Serial EEPROM (93C46)	2d
Serial Flash (W25)	2d
File
CSV Read/Write	2d
Embed File	2d
File (ESP32 SDMode)	2d
File (RPI)	2d
File (SD/SDHC Card)	2d
Real Time Clock
Real Time Clock (ESP32)	2d
Real Time Clock (Internal, DS1307, DS3231, DS3232)	2d
Real Time Clock (MCP7940N)	2d
Utility
Advanced String Functions	2d
Auto Version Identifier	2d
Lookup tables	2d
String Initialiser	2d
String Translator	2d

Difference between revisions of "Components"

Revision as of 09:13, 21 June 2024

Contents

Embedded Components

App Developer Components

Web Developer Components

Navigation menu

Page actions

Page actions

Personal tools

Navigation

Search

Tools

@@ Line 1: / Line 1: @@
+__TOC__
-==Inputs==
+==Embedded Components==
-===Analog Input===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 937e425e_21c0_4b08_8d8f_0bf80a6391d2.png|Image]] [[Component: ID 937e425e_21c0_4b08_8d8f_0bf80a6391d2|ADC (AD7680)]]
+<tabs>
-| 16-bit external ADC connected to the microcontroller using SPI.
+<tab name="Inputs">
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | General Input
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 0e4cb9c6_10d4_416f_bc27_5f8f7bc746b4|Grey Code Encoder]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 9dba6468_db7d_4eae_8b94_7bd35fd115b1|Grey Code Encoder 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 76bb1b8c_43da_48d3_b53f_a9907f03a528|IO Expander (MCP23017)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 331daac0_653d_4f45_9822_6408a8258bda|IO Expander (MCP23S17)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d43a1c1f_8ad6_4271_9f62_20e1bdf529f0|IO Expander (PCF8574)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4616b658_531f_4c5e_981a_4d9fc04f9a36|IO Expander (PCF8575)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 3531a68d_7686_44b7_a3a5_67afda8467dc|Quadrature Encoder]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 50d58a97_3208_4ff3_bcd4_0d2b1c22dc1c|Quadrature Encoder 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Analog Input
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 937e425e_21c0_4b08_8d8f_0bf80a6391d2|ADC (AD7680)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 235fd689_bfd1_4c4a_a918_6c3c36e9a49f|ADC (MCP356X)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e65e5368_af24_44a9_897e_cb0422fcea27|ADC QUAD + DAC (PCF8591)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 7aad74d6_b24e_4dab_91eb_5d72a973f12d|ADC Template]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 9b845489_48f5_4fa5_aace_2c97efdcede3|ADC Template 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 74571cdc_4f94_4e9a_b56b_376f36424996|Joystick (Sparkfun Quiic)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 94c78e1b_f580_4105_a223_7e40b75d134c|Joystick (Sparkfun Quiic) 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 11ca2f38_de81_4812_9338_4b5a7a89a658|Potentiometer]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3d8f329f_3bf9_4c90_8797_05100f6419f8|Potentiometer (Slider)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Switch
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 9306f758_06af_49f8_8b09_d10d2b4374dd|Rotary Switch]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 6f2c4205_6a87_46ba_a8b4_8c869e144fcd|Switch (Microswitch)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e2698f3e_1168_4f25_9c50_24a74ea7e34a|Switch Push Button]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 58b37280_d90e_4a23_941d_26f34ccff410|Switch Rotary 0 - 1]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e5dbdd14_0308_4a22_bacd_765215a4df45|Switch Rotary 0 - 15]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 1df1ea9a_6983_4014_aba5_f5144ea4e053|Switch Slide]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d43ac17c_2ec0_4277_95f9_fbc339456fab|Switch User Images]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Switches
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 208101fb_f735_4e83_980b_c1d2b4be28ff|Switch Array (Push)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID cd8da0fe_80cf_4532_bb50_69f0d1730e70|Switch Array (Push) 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 4ac72986_ad7d_49ce_afe5_9128831debc9|Switch Array (Slide)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 975b2770_cfa8_4c76_b8ca_c008735e366d|Switch Array (Slide) 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Keypad
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 6c74b9ee_2907_4b1e_8a9b_80fc192b6027|Keypad]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 1d24df27_423c_4d91_b2bb_e6ad3e121f14|Keypad (Cursor 3x3)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 287e2f0b_8869_4994_a958_c8f851091322|Keypad (Hex 4x4)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 7aad74d6_b24e_4dab_91eb_5d72a973f12d.png|Image]] [[Component: ID 7aad74d6_b24e_4dab_91eb_5d72a973f12d|ADC Template]]
-| ADC (Analogue to Digital Converter) based components.
 |}
-===General Input===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 0e4cb9c6_10d4_416f_bc27_5f8f7bc746b4.png|Image]] [[Component: ID 0e4cb9c6_10d4_416f_bc27_5f8f7bc746b4|Grey Code Encoder]]
+</tab>
-| Grey Code Encoder component implements a rotary encoder connected to a defined number of pinsGrey Code Encoders provide absolute positioning rather than incremental positioning.
+<tab name="Outputs">
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
 |-
-|width=30%|[[File:Component Icon 3531a68d_7686_44b7_a3a5_67afda8467dc.png|Image]] [[Component: ID 3531a68d_7686_44b7_a3a5_67afda8467dc|Quadrature Encoder]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | General Output
+|-
-| Quadrature Encoder component implements a rotary encoder connected to two pins.Quadrature Encoders provides incremental positioning rather than absolute positioning.
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 76bb1b8c_43da_48d3_b53f_a9907f03a528|IO Expander (MCP23017)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 331daac0_653d_4f45_9822_6408a8258bda|IO Expander (MCP23S17)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d43a1c1f_8ad6_4271_9f62_20e1bdf529f0|IO Expander (PCF8574)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4616b658_531f_4c5e_981a_4d9fc04f9a36|IO Expander (PCF8575)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 444fb704_814c_4707_a15c_759ba088505c|PWM (Internal)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 5bd41be2_1b9c_4f30_ba78_84cb29d61ced|PWM 16CH 12Bit (PCA9685)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 2f95990b_1dc6_4cb4_a6b1_e000a487b702|Relay (Grove 103020005)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Analog Output
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e65e5368_af24_44a9_897e_cb0422fcea27|ADC QUAD + DAC (PCF8591)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3d87ffe9_97c1_4013_a2cd_82c24d0ccb48|DAC (AD5662)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 09222494_fbef_455b_9651_9e9e46592eb5|DAC (Internal)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e78d88a0_e132_4f82_988d_59353009b669|DAC (MCP4725)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 70a3bead_e66d_4a76_bc7b_fb1baa86d2e6|DAC (MCP47x6)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID fab5cf20_8686_4397_8a21_cc936659d5f6|DAC (MCP48x1)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b6de5668_e0ae_4c1a_9c16_b16aa3f58024|DAC (MCP49x1)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f484e96a_af4f_434e_a002_70d3f4315dfb|DAC Dual (MCP48x2)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b66f5769_5e9d_40e7_9159_c6a0552ff86e|DAC Dual (MCP49x2)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID adb523db_db13_4d19_bfa3_0fbc177e4d3f|DAC Quad (MCP4728)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 37025734_a84d_46ad_9078_925beb81f38b|Digital Potentiometer (MCP41XX / MCP42XX)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID aba8b3ce_e71c_49c8_a961_d59b36338afa|Digital Potentiometer (MCP41XXX / MCP42XXX)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3a3a0802_42b6_4c31_8983_4d043b70b443|Digital Potentiometer (MCP44XX)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a69bf9b3_272e_44b3_a47d_22f53c3c0804|Digital Potentiometer (MCP45XX / MCP46XX)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0a0819d2_73b7_4bc2_bc11_f3139972d224|Digital Potentiometer (X9Cx0x)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Audio Output
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 04bbd3b8_ee11_40eb_91e8_1bbbd6f65b8c|Buzzer]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 2061d38d_0cca_440c_a842_f9c84ca55f90|DFPlayer (MP3 / WAV)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 70ec3aee_f273_4b0e_8ee6_e2b3a8b693af|Piezo Sounder]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 01fd689c_985c_4b10_bc98_99de5f9b41a8|Speech (Phoneme)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID eaee384d_6b16_4988_b1aa_8628231a7128|WAV Library File]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | LED
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 44f82374_a417_40d5_bd42_23a177a390d2|LED Mono]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ce086f9b_c365_4471_b6e4_1760a53a7bfb|LED Mono Custom]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b562ceda_0ae0_4c50_bbcd_38a4b7e77829|LED Mono User Images]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 67271369_4b2e_4126_a5d0_a93142ac71b9|LED MultiColour Bi (5mm, PCB)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID a5c2033e_8639_4de3_80eb_58c02b44bd96|LED MultiColour Tri (5mm, PCB)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | LEDs
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID bbfc7c9f_fa05_4257_849d_8601ff7dc1de|Chainable RGB LED v2.0 (Grove 104020048)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b07ae733_c144_4558_979a_be737044519c|LED Array]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 6664b695_2a8f_4247_ae55_110b38270877|LED Bar v2.0 (Grove 104020006)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID fef1acfd_e19f_4af2_9593_ba341240ce4f|LED Charlieplex]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ef9cb184_0167_4d3e_a63b_6e0faad72391|LED Matrix]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 24bef796_e0e3_4195_a76d_920fdba5ea79|LED Matrix (Parallel)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 5a88c882_0396_44f3_a67b_f236244800d1|LED Matrix (Serial)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 0161e243_0ca0_497d_88be_76351cf4dfa1|RGB LED APA102C]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 12a23e2a_0b1e_427e_975a_f0b56d4a9483|RGB LED LP5030 LP5036]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 284bf38b_0fe1_4a0b_ae43_e1784445821b|RGB LED SK6812 RGBW]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID d814cb36_0d04_4eeb_b5b3_da8276ad8bdf|RGB LED WS2801]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID d977c3ef_c7dc_4683_a1be_76e17e6ba12b|RGB LED WS2811 / WS2812 / APA106]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Mechatronics
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 83c095cc_fefc_4854_a7c5_7fe867753bf4|Coupling]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4b0e5196_0db2_45a9_bcb9_b172f71f9c4d|DC Motor]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID bfa45502_f9d6_4b53_a239_b5731f9288d5|Gearbox]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 50eddda0_73c3_4514_b2e0_7e33abeaa162|Grove I2C Motor Driver]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 2e8c4276_d81c_4dd6_a70f_aad25e8bbf1e|Kinematics Arm]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 15921536_cf92_4cd3_88e4_207c251ab775|Linear Actuator]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 02668c1b_013c_43b8_a5b3_4f9d73412137|Servo Motor]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 9202a62e_0a42_4780_adce_16b701e5ec53|Servo Motor Controller]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 1ac8ae8b_bcd2_493f_b516_36dacb3695f9|Solenoid DC]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b331ed08_2a01_466e_9816_df3342019892|Stepper Motor]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 8c4c9db2_8c42_458d_b071_001acd191c49.png|Image]] [[Component: ID 8c4c9db2_8c42_458d_b071_001acd191c49|Wii Nunchuk]]
-| A component to interface the Wii Nunchuck which features a 3-axis 10-bit AccelerometerA 2-axis 8-bit joystick and two digital button inputs.Interfaced using a standard I2C bus at 100KHz.Nunchuk must be powered at 3V3 to avoid damage.
 |}
-===Keypad===
+</tab>
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 6c74b9ee_2907_4b1e_8a9b_80fc192b6027.png|Image]] [[Component: ID 6c74b9ee_2907_4b1e_8a9b_80fc192b6027|Keypad (4x4)]]
+<tab name="Displays">
-| Preset keypad based around the 4 * 4 unit.
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Segment
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID d9e86781_7fa0_4e64_9f82_ef49152611b0|4-Digit Display (Grove 104030003)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3299d5f9_92a6_414a_af9f_f7fe29b3e6ed|4-Digit Display (Grove 104030003) 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID bddc472f_59dc_4705_997e_662768d643cd|7Segment (74HC595)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 727806c8_26a4_489a_a11e_4ef0306694f5|7Segment (74HC595) 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 4de4697e_2de3_432e_a0fe_97ef8c79dfc0|7Segment (Hex TM1637)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 5c1232f7_2af1_4ce9_9124_1ad038ac09d8|7Segment (Hex TM1637) 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID e2c3165d_8020_4e52_bc7e_7022ff459129|7Segment (Quad TM1637)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e6bd0a57_6bf2_42bb_b05e_6b6cdad2ce0e|7Segment (Quad TM1637) 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID f4400e36_dd95_4472_86da_4bba68d68d5d|7Segment (Quad)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 71f200a6_153f_4984_8928_850523305e02|7Segment (Quad) 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 52c5383b_4f48_4029_8b75_c3633f7cf892|7Segment (Single)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 6a9e9265_e261_4604_8dc3_252ea3ccf02c|7Segment (Single)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 5015c7e1_2166_4f1a_b9b1_9bd181784cea|Starburst Display]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ae5688c5_6bfc_4e62_aaf4_e9a56fb068f9|Starburst Display]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Alphanumeric
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 672cb410_6026_403b_aff7_0628fe9e8140|LCD (Adafruit, 16x2)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 913991df_9bcb_475a_ae49_d9eb611b0d71|LCD (Adafruit, 20x4)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f8c9b53d_0bf2_469f_8f0a_34caa93749ba|LCD (Generic, 16x2)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a2b40602_5421_4e2f_ba82_96db1be51d69|LCD (Generic, 20x4)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 51677753_5eaf_4e3a_a3c8_71c49a142171|LCD (Generic, Configurable)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f45468b8_5731_4bfb_b5c0_4042ef1dd1da|LCD (Grove - I2C)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 31326041_9339_4cf4_b609_c14cc66318b3|LCD (Grove - UART)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 24a7a014_0ad0_44a7_b63b_61dac014eee7|LCD (ST7032i)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID bcd6a955_12c6_4ed4_a22f_f16eb62e0762|LCD I2C (Backpack)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3cf64267_8c56_47b0_84a1_a933a77716bc|LCD I2C (LCM1602)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c198e346_6b0f_4309_973c_78d7207e0b96|LCD SPI (MiniClick)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Graphical Color
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 07698cde_7f30_419b_825c_35450877ad26|GLCD (4D Goldelox)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 44f742f7_3039_4edb_8e96_717377b85e69|GLCD (4D Picaso v1)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b710c9a3_b93a_407d_81b2_190b5f6afdf1|GLCD (4D Picaso v2)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3167b57a_5a41_4a91_bd6c_e0a8cc23cf56|GLCD (GC9A01A SPI)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 79f105db_3eb0_45cb_b3fb_e4b6d6e94358|GLCD (ILI9163C)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 7bd84555_ae51_40cc_8e1a_a7bcba661e52|GLCD (ILI9341 SPI)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID bc0a0612_ef85_48fb_8960_5e78f4083df1|GLCD (ILI9341)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3408fde0_f512_487b_8902_74cd56623191|GLCD (ILI9488 SPI)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b5148d9e_884c_488e_8536_741e7fc4306c|GLCD (ILI9488)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 641b19bc_b941_46de_843d_229ca347466d|GLCD (LS020)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0a432f5f_d9a0_4726_9b42_18de4eeddfd8|GLCD (SSD1289)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e635704b_9d69_466c_be7f_a03543f011a6|GLCD (SSD1331)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 8af7f5ec_2e7a_4080_9566_b816c24ebbfa|GLCD (SSD1351 SPI)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID fd1a193b_149f_4ba8_b1ce_ce39ca863975|GLCD (SSD1351)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 9d414a42_fd9b_4afd_9493_dbf80eece14a|GLCD (SSD1963) Parallel]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4e30b15e_2507_4583_995d_b2056e04a286|GLCD (ST7789V)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b8541d78_44db_43c3_961a_a96141da67e9|GLCD (ST7796 SPI)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a00b9a94_9608_4208_af26_68a94dab336b|GLCD (STM32F429ZI)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 5bd73e47_8060_4677_a1a3_6191ceb924b7|GLCD (STM32F469NI)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 6a2520bc_d8dd_4001_937e_21925253291a|GLCD (STM32F746NG)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 756045fb_388b_4dbb_8f10_5136de8bfacb|Nextion Display]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 7c3895d3_0359_4b4c_8fa4_ab6314cd5fbf|Raspberry Pi HDMI]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Graphical Monochrome
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 8a7a90d2_3274_4433_8609_699e976e0719|GLCD (Grove OLED)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c9d3b357_b914_4301_a741_0d13819e441c|GLCD (KS0108)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a1edc3df_71d0_4ec5_a511_05818570696f|GLCD (PDC8544)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ebf9c18e_044e_41e2_b845_da14e744b25f|GLCD (SH1106) I2C]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 91c1b7f5_6974_4ea3_84b3_4e24a9784631|GLCD (SH1106) SPI]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 5ed21fc4_3979_4825_8c8e_95944d1101d9|GLCD (SSD1305)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 8fccb5eb_1664_4dd5_9d2e_5c62294a7151|GLCD (SSD1305) Buffered]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 7b1ef6f5_5c39_4b7f_9faf_eed122ff2b3e|GLCD (SSD1306)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 9e067700_36d1_4697_a165_9e8d60b45399|GLCD (SSD1306) Buffered]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f6ab6074_68ba_4cd4_9274_f973102f8518|GLCD (SSD1306) I2C]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f0f2f410_3216_4a3f_a2dc_db35f4a2821d|GLCD (SSD1322) Buffered]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID dba19ea1_efe2_46e4_90be_18ee41930d1e|GLCD (SSD1322) Parallel]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 6548a7da_7e0b_4d45_ad92_f61bf5713442|GLCD (SSD1327) I2C]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID deade808_da0a_4530_8cf4_7c7894fdb6a3|GLCD (SSD1327) SPI]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 496cf2f0_4220_4f70_9219_7c67c672e36e|GLCD (ST7036) I2C]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 889a6ac6_12d0_40c0_9882_075ce9801eeb|GLCD (ST7565R) Parallel]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 2149fdef_84e9_407d_b68d_fc7f39e6f41e|GLCD (ST7565R) SPI]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 804de427_4b97_4468_9ea9_b5adf7b98771|GLCD (ST7920) Parallel]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c9d3b357_b914_4301_a741_0d13819e452e|GLCD (T6963C)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 71ba0cdd_e003_4f6d_9dae_8eecffd1774b|GLCD (TLS8201)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ebd426a3_c694_42bb_8611_320e27c6ea65|GLCD (UC1701)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 65f9d966_4d43_498f_b6ca_2e66e49a2379|GLCD eINK (IL3829)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Graphical Library
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID cbfb3c21_f13d_488d_9b90_400c8d4fc605|Display Manager]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b02b7c75_53cb_4be4_871f_61be633d898c|GLCD Bitmap Drawer FAT]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 52dd90bd_fec9_4ee5_934c_e4b2297168a5|GLCD Bitmap Drawer ROM]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d4994410_ca95_4d1c_8d57_542d48a21d58|GLCD Graph Creator]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 7b198227_81d6_404c_a2d4_ce1e59ef84f8|GLCD Graph Creator XY]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0df0d376_b9dd_4c40_8102_1b0203980c3c|GLCD QR Code Generator]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 9e0fa7e4_0c8c_485d_98c4_6f0ef8e57d40|GLCD Textfield]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID fe5255ed_0613_4e5b_b011_9f432531832e|ResistiveTouch]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 90c9f255_b526_4288_b0b6_26736e6db2e2|Touch Screen (FT6X06)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3c28ab9b_d363_402e_a99b_ff109b8729e3|Touch Screen (GT911)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ab872cc0_e6fe_4d30_a7cb_a1efc6ae87a6|Touch Screen (XPT2046)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon b80e57b1_8941_4831_878b_b27440b4f4d8.png|Image]] [[Component: ID b80e57b1_8941_4831_878b_b27440b4f4d8|Keypad (Generic)]]
-| Keypad components based on raster scanned keypad modules or a simple button matrix.
 |}
-===Switch===
+</tab>
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 9306f758_06af_49f8_8b09_d10d2b4374dd.png|Image]] [[Component: ID 9306f758_06af_49f8_8b09_d10d2b4374dd|Rotary Switch]]
+<tab name="Sensors">
-| A standard rotary switch with 4 digital outputs and 10 or 16 discrete positions.
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Audio
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0a5d4625_78e6_4bf3_a802_925c655ef718|Heelight Sensor (Grove 101020312)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3bb0eba4_8ae3_442b_8653_507d1bde8be0|Sound Sensor (Grove 101020023)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c5d9ffa3_5a7d_4fb2_b9ba_ec855ad7b25c|Ultrasonic (HCSR04)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 06c52475_f44f_41f3_aae7_9ddeee44fc06|Ultrasonic Ranger (Grove 101020010)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Electrical
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID aa85a268_ba47_4a33_bdad_04f51b716cdf|Current Sensor (ACS7xx)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ef2427ea_7767_43be_a0c5_6f705e3c2668|Energy Monitor (PZEM-004T)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 29b4cd01_9dd8_43ad_b5b4_895358321a89|LTSR Current Transducer]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Environmental
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c416a604_834b_48ba_a5e8_a47cad4f08de|Air Quality (BME688)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 69a2ca78_26f3_47df_a402_b5a7c1ff73f2|Analogue Temp Sensors]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a9eb79b0_1d24_4acf_aade_d3639aa800c7|Barometer (BME280)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 38f89887_af35_470e_8c6f_c91f3c99e88d|Barometer (BMP180)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b52758bf_4466_48c0_8054_33ee4b11e82b|Barometer (BMP280 / Grove 101020192)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ca60c1d2_fb77_4e3e_9d01_c4496d35db1e|Barometer (DPS310)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b8c43425_121c_4dfc_8a70_665973e9938b|Barometer (MS5637)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 36175036_08af_4bcf_8dd2_1c46f6761385|Magnetometer (BMM150)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID caa29480_5f50_4c3b_8dac_22cfb8e36999|Pulse Oximeter (Max30100)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component:_ID_2755f2ee_60e0_4e4d_9bce_8bffb3a6a730|Temp / Humidity (AHT10)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 40785d28_4fe3_4aec_a5d9_ba30b2d58760|Temp / Humidity (DHT11)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 95a1525b_7e03_4836_8c09_59bf174f603b|Temp / Humidity (DHT22)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0689100f_8b13_45a6_98a2_b9833b02eed5|Temp / Humidity (Grove 101020019)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID eca89720_1386_4589_ab75_6c0425162b91|Temp / Humidity (Grove 101020212)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 66e6f00d_d894_49de_a768_02997eaf45e1|Temp / Humidity (HTS221)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 75d7da2a_c682_4622_ac86_b6eb9ed7a88e|Temp / Humidity (SHT21)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4475d8e8_4f60_48be_8a27_e91d85fbabae|Temp / Humidity (SHT31)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID df4eca75_779f_47ce_9495_56d3233be5e1|Temperature (DS1822)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 783b7689_0c71_44fb_9dde_673e4b7455ba|Temperature (DS18B20)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b42d9405_a751_4622_8fbe_ce512da391ba|Temperature (DS18S20)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID bbf0ab46_623e_44c6_9402_3acfcd9d0006|Temperature (LM75B)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 05acf53c_0b2e_4d26_8d5d_f112d4ce4c68|Temperature Infrared (Grove 101020062)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID de8dcab3_c23b_48b4_a88e_3eb8b584109f|Temperature Sensor (Grove 101020015)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 93ab1895_66cf_4fd8_a04f_79f09acc19e6|Thermistor]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 97e631c7_51d9_4482_9b65_481b390a686d|Thermocouple (MAX31855)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID cbedb7e1_22c3_4edc_80f8_0501f7f9e398|Thermocouple (MAX31856)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 60de8264_7faf_4f77_904e_69bb19909ba8|Thermocouple (MCP960X)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4b57ccb5_9e55_4d0e_8961_43f6fcaec2d7|Water Sensor (Grove 101020018)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Force
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e8ec17bd_a898_44d2_83af_968c96826948|Load Cell (HX711)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Light
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e08872a7_6962_4b61_bcca_71389f8ed8d7|Ambient Light]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID d79f7da1_0e33_4fba_b4a0_ac127b5a4812|Beam Breaker]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID d8b85f99_8de3_41dd_9bab_f8bfc19e74af|Colour Sensor]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID a1ea988c_88c9_4f96_ac26_1684e918a3de|Colour Sensor (Grove 101020341)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e1d52efb_00d4_4e19_ba4c_29b292535ea1|Infrared Array AMG88xx]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID f3b8eed1_fef6_4c1b_b62d_8efc84b1be35|Infrared Reflective Sensor (Grove 101020174)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
 |-
-|width=30%|[[File:Component Icon 6f2c4205_6a87_46ba_a8b4_8c869e144fcd.png|Image]] [[Component: ID 6f2c4205_6a87_46ba_a8b4_8c869e144fcd|Switch (Microswitch)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 9c5b7454_e67d_4111_b220_bf8e5ff8b174|Light Sensor (Grove 101020132)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Industry standard V3 size microswitch fitter with a roller arm - activated by other panel objects coming into contact with the roller.
 |-
-|width=30%|[[File:Component Icon 953a042a_b2aa_4f2e_94e2_ee2979cfc92e.png|Image]] [[Component: ID 953a042a_b2aa_4f2e_94e2_ee2979cfc92e|Switch Template]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ccbd6829_44c8_4011_954b_c39dd93adbed|PIR Motion (Grove 101020020)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Single switch digital input components.
-|}
-===Switches===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 208101fb_f735_4e83_980b_c1d2b4be28ff.png|Image]] [[Component: ID 208101fb_f735_4e83_980b_c1d2b4be28ff|Switch Array (Push)]]
-| An array of up to eight momentary push switches, each connected to a single pin of the specified port.
 |-
-|width=30%|[[File:Component Icon 4ac72986_ad7d_49ce_afe5_9128831debc9.png|Image]] [[Component: ID 4ac72986_ad7d_49ce_afe5_9128831debc9|Switch Array (Slide)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 20a48db1_d91d_4c51_a49f_f878d0bcbad3|Photo Reflector]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| An array of up to eight slide switches, each connected to a single pin of the specified port.
-|}
-==Outputs==
-===Analog Output===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 3d87ffe9_97c1_4013_a2cd_82c24d0ccb48.png|Image]] [[Component: ID 3d87ffe9_97c1_4013_a2cd_82c24d0ccb48|DAC (AD5662)]]
-| 16-bit external DAC connected to the microcontroller using SPI.
 |-
-|width=30%|[[File:Component Icon 09222494_fbef_455b_9651_9e9e46592eb5.png|Image]] [[Component: ID 09222494_fbef_455b_9651_9e9e46592eb5|DAC (Internal)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3d1bbeb7_0fb3_4356_a2a6_e1b4cd28e0ff|Photo Reflector 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Provides access to the onboard digital to analog converter (DAC) peripheral allowing for simple analogue output.Often the DAC output will be very low current and will need amplification using external circuitry to drive anything useful.
 |-
-|width=30%|[[File:Component Icon 70a3bead_e66d_4a76_bc7b_fb1baa86d2e6.png|Image]] [[Component: ID 70a3bead_e66d_4a76_bc7b_fb1baa86d2e6|DAC (MCP47x6)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 6e5b4f6f_e2d9_4272_a854_749a762f55c1|Photo Transistor]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| Component to drive a digital to analogue converter (DAC) IC from Microchip via an I2C interface.Compatible with MCP4706 (8-Bit), MCP4716 (10-Bit) and MCP4726 (12-Bit) devices.
 |-
-|width=30%|[[File:Component Icon fab5cf20_8686_4397_8a21_cc936659d5f6.png|Image]] [[Component: ID fab5cf20_8686_4397_8a21_cc936659d5f6|DAC (MCP48x1)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID bb2fcffe_6f54_412e_adaf_bdebea1f83d2|Photo Transistor 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Component to drive a digital to analogue converter (DAC) IC from Microchip via an SPI interface.Compatible with MCP4801 (8-Bit), MCP4811 (10-Bit) and MCP4821 (12-Bit) devices.
 |-
-|width=30%|[[File:Component Icon b6de5668_e0ae_4c1a_9c16_b16aa3f58024.png|Image]] [[Component: ID b6de5668_e0ae_4c1a_9c16_b16aa3f58024|DAC (MCP49x1)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 488c3a77_9ff2_4e60_9bfd_cf074405e294|Range Time of Flight (VL53L0X)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Component to drive a digital to analogue converter (DAC) IC from Microchip via an SPI interface.Compatible with MCP4901 (8-Bit), MCP4911 (10-Bit) and MCP4921 (12-Bit) devices.
 |-
-|width=30%|[[File:Component Icon f484e96a_af4f_434e_a002_70d3f4315dfb.png|Image]] [[Component: ID f484e96a_af4f_434e_a002_70d3f4315dfb|DAC Dual (MCP48x2)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Magnetic
-| Component to drive a dual digital to analogue converter (DAC) IC from Microchip via an SPI interface.Compatible with MCP4802 (8-Bit), MCP4812 (10-Bit) and MCP4822 (12-Bit) devices.
 |-
-|width=30%|[[File:Component Icon b66f5769_5e9d_40e7_9159_c6a0552ff86e.png|Image]] [[Component: ID b66f5769_5e9d_40e7_9159_c6a0552ff86e|DAC Dual (MCP49x2)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c14492da_a844_40e6_ae29_50e58864b237|Hall Effect Analog]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Component to drive a dual digital to analogue converter (DAC) IC from Microchip via an SPI interface.Compatible with MCP4902 (8-Bit), MCP4912 (10-Bit) and MCP4922 (12-Bit) devices.
 |-
-|width=30%|[[File:Component Icon adb523db_db13_4d19_bfa3_0fbc177e4d3f.png|Image]] [[Component: ID adb523db_db13_4d19_bfa3_0fbc177e4d3f|DAC Quad (MCP4728)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 655234db_5700_4206_934f_56e499edbff9|Hall Effect Digital]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| Component to drive a quad digital to analogue converter (DAC) IC from Microchip via an I2C interface.Compatible with MCP4728 (12-Bit) devices.
 |-
-|width=30%|[[File:Component Icon 37025734_a84d_46ad_9078_925beb81f38b.png|Image]] [[Component: ID 37025734_a84d_46ad_9078_925beb81f38b|Digital Potentiometer (MCP41XX MCP42XX)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 1c8bc72f_4944_4456_af99_9686c237d6b3|Reed Switch]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| The MCP41XX and MCP42XX device range supports up to 2 digital potentiometers or rheostat outputs.129 or 257 possible output resistance values for each channel.
 |-
-|width=30%|[[File:Component Icon 3a3a0802_42b6_4c31_8983_4d043b70b443.png|Image]] [[Component: ID 3a3a0802_42b6_4c31_8983_4d043b70b443|Digital Potentiometer (MCP44XX)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Movement Orientation
-| The MCP44XX device range supports 4 digital potentiometers or rheostat outputs.129 or 257 possible output resistance values for each channel.
 |-
-|width=30%|[[File:Component Icon a69bf9b3_272e_44b3_a47d_22f53c3c0804.png|Image]] [[Component: ID a69bf9b3_272e_44b3_a47d_22f53c3c0804|Digital Potentiometer (MCP45XX / MCP46XX)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 20699a0c_0925_40c4_8aa1_35f294e225e6|Accel / Gyro / Mag 9-Axis (LSM9DS1)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| The MCP45XX and MCP46XX device range supports up to 2 digital potentiometers or rheostat outputs.129 or 257 possible output resistance values for each channel.
 |-
-|width=30%|[[File:Component Icon 0a0819d2_73b7_4bc2_bc11_f3139972d224.png|Image]] [[Component: ID 0a0819d2_73b7_4bc2_bc11_f3139972d224|Digital Potentiometer (X9Cx0x)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 5d2c6406_e3aa_46bd_8144_57f60194a1e9|Accel / Gyro / Mag 9-Axis (MPU9250)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| The X9Cx0x device range supports a digital potentiometers outputs.100 possible wiper tap points available. Supported devices include X9C102, X9C103, X9C104, X9C503.
-|}
-===Audio Output===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 04bbd3b8_ee11_40eb_91e8_1bbbd6f65b8c.png|Image]] [[Component: ID 04bbd3b8_ee11_40eb_91e8_1bbbd6f65b8c|Buzzer]]
-| Drives a simple fixed frequency buzzer in hardware and simulates the sound of a buzzer in simulation.To actually drive a buzzer you would have to amplify the signal from the microcontrollerusing a transistor or MOSFET.
 |-
-|width=30%|[[File:Component Icon 70ec3aee_f273_4b0e_8ee6_e2b3a8b693af.png|Image]] [[Component: ID 70ec3aee_f273_4b0e_8ee6_e2b3a8b693af|Piezo Sounder]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 940ad7e9_abab_434f_a5e3_ff50e2fdf962|Accel / Gyro 6-Axis (Grove 105020012)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Drives a simple variable frequency piezo sounder in hardware and simulates the sound in simulation.To actually drive a piezo you may have to amplify the signal from the microcontrollerusing a transistor or MOSFET.
 |-
-|width=30%|[[File:Component Icon 01fd689c_985c_4b10_bc98_99de5f9b41a8.png|Image]] [[Component: ID 01fd689c_985c_4b10_bc98_99de5f9b41a8|Speech (Phoneme)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 75a362f4_d74d_48e7_9790_530f4d0e78b6|Accel / Gyro 6-Axis (MPU-6050)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Speech component allowing Phoneme based speech for use on an embedded platform.The simulation also has an advanced speech engine allowing realistic text to speech in multiple languages using the RealSpeak voice engine.
-|}
-===General Output===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 444fb704_814c_4707_a15c_759ba088505c.png|Image]] [[Component: ID 444fb704_814c_4707_a15c_759ba088505c|PWM (Internal)]]
-| Pulse Width Modulation, a versitile way of generating a digital pulse using mark / space modulation.Uses the capture compare peripherals onboard most Microcontrollers to generate accurate waveforms without any intervention from the processor.Useful for generating audio, controlling the speed of motors, brightness of LED etc.
 |-
-|width=30%|[[File:Component Icon 5bd41be2_1b9c_4f30_ba78_84cb29d61ced.png|Image]] [[Component: ID 5bd41be2_1b9c_4f30_ba78_84cb29d61ced|PWM 16CH 12Bit (PCA9685)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d950cf7c_f9fc_49ba_a486_0d45b6afd1aa|Accel / Gyro 6-Axis (MPU-6886)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| The PCA9685 is an I²C-bus controlled 16-channel LED controller optimized for Red/Green/Blue/Amber (RGBA) color backlighting or Servo motor applications. Each output has its own 12-bit resolution (4096 steps) fixed frequency individual PWM controller that operates at a programmable frequency from a typical of 24 Hz to 1526 Hz.All outputs are set to the same PWM frequency.Up to 64 devices can be chained together on a single I²C-bus to provide up to 1024 individual PWM outputs.
 |-
-|width=30%|[[File:Component Icon 2f95990b_1dc6_4cb4_a6b1_e000a487b702.png|Image]] [[Component: ID 2f95990b_1dc6_4cb4_a6b1_e000a487b702|Relay (Grove 103020005) (103020005)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID db2c91d9_4fd5_42b8_98f4_76dfb160dece|Accel / Mag 6-Axis (LSM303D)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| The Relay is a digital normally open switch capable of switching much higher voltages and currents than your normal Microcontroller outputs.When set to HIGH, the LED will light up and the relay will close allowing current to flow. The peak voltage capability is 250V at 10 amps.Simulated component is shaded green when the relay is active.
-|}
-===LED===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 1fb787a5_54fb_4847_9299_3adbf9927b59.png|Image]] [[Component: ID 1fb787a5_54fb_4847_9299_3adbf9927b59|LED (Generic, RGB)]]
-| An LED with red, green and blue elements that can be mixed together to producealmost any colour at any brightness.
 |-
-|width=30%|[[File:Component Icon 67271369_4b2e_4126_a5d0_a93142ac71b9.png|Image]] [[Component: ID 67271369_4b2e_4126_a5d0_a93142ac71b9|LED MultiColour Bi (5mm, PCB)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d61dd6a6_231e_4244_9e8d_4f15e7ea10d5|Accel / Mag 6-Axis (LSM303DLHC)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| An industry standard 5mm diameter bi-colour LED.Any color may be chosen, and the leads trimmed to length.
 |-
-|width=30%|[[File:Component Icon a5c2033e_8639_4de3_80eb_58c02b44bd96.png|Image]] [[Component: ID a5c2033e_8639_4de3_80eb_58c02b44bd96|LED MultiColour Tri (5mm, PCB)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 788b85c9_21ae_4fad_ada1_9f118fc8023c|Accelerometer 3-Axis (LIS3DHTR) ]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| An industry standard 5mm diameter tri-colour LED.Any color may be chosen, and the leads trimmed to length.
 |-
-|width=30%|[[File:Component Icon a7b05886_784c_48c8_a6f6_cc371c7728e1.png|Image]] [[Component: ID a7b05886_784c_48c8_a6f6_cc371c7728e1|LED Template]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 72f0a8c3_2b8f_4723_b22a_4a81873e5151|Accelerometer 3-Axis (LIS3LV02DQ)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Single LED digital output components.
-|}
-===LEDs===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon bbfc7c9f_fa05_4257_849d_8601ff7dc1de.png|Image]] [[Component: ID bbfc7c9f_fa05_4257_849d_8601ff7dc1de|Chainable RGB LED v2.0 (Grove 104020048) (104020048)]]
-| Grove-Chainable RGB LED V2.0 is based on P9813S14 chip. This chip is a full-color light source driver chip that can provide three constant current driver and 256 greyscale modulation output. The key word of this product is “Chainable”, so how many LEDs can it be chained? By connecting the output grove connector of one LED to the input grove connector of another one, you are able to chain 1024 RGB LEDs at most!
 |-
-|width=30%|[[File:Component Icon c8da67a7_fc7b_48c0_8c3f_3264c74f4024.png|Image]] [[Component: ID c8da67a7_fc7b_48c0_8c3f_3264c74f4024|LED Array Template]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 2c716005_e9b5_46e3_86f9_30e5268341a9|Accelerometer 3-Axis (MMA8452Q)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Multiple LED digital output components.
 |-
-|width=30%|[[File:Component Icon 6664b695_2a8f_4247_ae55_110b38270877.png|Image]] [[Component: ID 6664b695_2a8f_4247_ae55_110b38270877|LED Bar v2.0 (Grove 104020006) (104020006)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 447dabf8_4e39_46a5_a3d6_a02341bef0f0|Gyroscope 3-Axis (L3G4200D)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| LED Bar is comprised of a 10 segment LED gauge bar and an MY9221 LED controlling chip.It can be used as a indicator for remaining battery life, voltage, water level, music volume or other values that require a gradient display. There are 10 LED bars in the LED bar graph: one red, one yellow, one light green, and the rest green. It lights up the LEDs sequentially from red to green, so the entire bar graph is lit up in the end.
 |-
-|width=30%|[[File:Component Icon 489ad870_75dd_4fc4_9879_aa83871ddef6.png|Image]] [[Component: ID 489ad870_75dd_4fc4_9879_aa83871ddef6|LED Charlieplex]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 8e4553f8_fce7_4fed_80c1_33de9590a678|Gyroscope 3-Axis I2C (L3GD20)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Create an evenly spaced array of LED indicators using a reduced amount of I/O pins.Only one LED can be switched on at once, high speed multiplexing allows multiple LEDs to appear to be lit at once.Each will be connected in line with the standard charlieplex scheme.Set target object to point at any standard LED component to change the style.
 |-
-|width=30%|[[File:Component Icon ef9cb184_0167_4d3e_a63b_6e0faad72391.png|Image]] [[Component: ID ef9cb184_0167_4d3e_a63b_6e0faad72391|LED Matrix (HT16K33)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 593b7216_0a11_465c_9cf5_3b809503a72c|Gyroscope 3-Axis SPI (L3GD20)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| LED Matrix component designed to work using a HT16K33 LED driver IC.Can drive up to 16 x 8 (128) LEDs.Includes support for 8x16 Backpack, 16x8 Featherwing, 8x8 Backpack and Custom.
 |-
-|width=30%|[[File:Component Icon 24bef796_e0e3_4195_a76d_920fdba5ea79.png|Image]] [[Component: ID 24bef796_e0e3_4195_a76d_920fdba5ea79|LED Matrix (Parallel)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e4f1697e_5571_475a_a2b1_aa7243920422|Magnetometer (SM324)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| LED Matrix component designed to work using multiple data pins and a single clock pin.Each LED on the display can be controlled in a chain by setting the data appropriatley and then generating the appropriate amount of clock pulses.
 |-
-|width=30%|[[File:Component Icon 5a88c882_0396_44f3_a67b_f236244800d1.png|Image]] [[Component: ID 5a88c882_0396_44f3_a67b_f236244800d1|LED Matrix (Serial)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4c2256c0_4453_4369_8c36_09770d223a09|Magnetometer 3-Axis (HMC5883L)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| LED Matrix component designed to work using a single data and clock pin.Each LED on the display can be controlled in a chain by setting the data appropriatley and then generating the appropriate amount of clock pulses.
 |-
-|width=30%|[[File:Component Icon 0161e243_0ca0_497d_88be_76351cf4dfa1.png|Image]] [[Component: ID 0161e243_0ca0_497d_88be_76351cf4dfa1|RGB LED APA102C]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 03b98e89_8fee_466f_87b9_42b3b3e1cb41|Magnetometer 3-Axis (QMC5883L)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simple chained RGB LED controller IC allowing multiple LEDs to be controlled using a serial data stream.Allows RGB LEDs to be driven with full 24-bit colour depth.Allows single chains, 2D arrays and 3D cube formations to be simulated.Supports Bit Banged or SPI peripheral based data modes.
 |-
-|width=30%|[[File:Component Icon d814cb36_0d04_4eeb_b5b3_da8276ad8bdf.png|Image]] [[Component: ID d814cb36_0d04_4eeb_b5b3_da8276ad8bdf|RGB LED WS2801]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 8c4c9db2_8c42_458d_b071_001acd191c49|Wii Nunchuk]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simple chained RGB LED controller IC allowing multiple LEDs to be controlled using a serial data stream.Allows RGB LEDs to be driven with full 24-bit colour depth.Allows single chains, 2D arrays and 3D cube formations to be simulated.Supports Bit Banged or SPI peripheral based data modes.
 |-
-|width=30%|[[File:Component Icon d977c3ef_c7dc_4683_a1be_76e17e6ba12b.png|Image]] [[Component: ID d977c3ef_c7dc_4683_a1be_76e17e6ba12b|RGB LED WS2811 WS2812 APA106]]
-| A simple chained RGB LED controller IC allowing multiple LEDs to be controlled using a serial data stream.Compatible with the WS2811, WS2812, WS2812B, APA104 and APA106 Type Controller ICs.Allows RGB LEDs to be driven with full 24-bit colour depth.Allows single chains, 2D arrays and 3D cube formations to be simulated.Requires a high speed microcontroller to generate the critical timings to drive the device.
 |}
-===Mechatronics===
+</tab>
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 83c095cc_fefc_4854_a7c5_7fe867753bf4.png|Image]] [[Component: ID 83c095cc_fefc_4854_a7c5_7fe867753bf4|Coupling]]
+<tab name="Storage">
-| A simple component to couple together two rotating shafts.An essential component when working with motors, gearboxes, encoders and other rotational systems.
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Buffer
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 201d99f7_acf8_481d_a703_61860c2ba3ea|Circular Buffer (16-bit)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c34f9b8a_a915_4f75_ad0c_87f2ad670a8a|Circular Buffer (8-bit)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon bfa45502_f9d6_4b53_a239_b5731f9288d5.png|Image]] [[Component: ID bfa45502_f9d6_4b53_a239_b5731f9288d5|Gearbox]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ed491c82_9f85_4627_93ce_d2b588352539|Circular Buffer (Float)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simple component to couple together two rotating shafts via a gearbox.The gearbox can be used to scale the input rotational speed and optionally reverse the output direction.
 |-
-|width=30%|[[File:Component Icon 15921536_cf92_4cd3_88e4_207c251ab775.png|Image]] [[Component: ID 15921536_cf92_4cd3_88e4_207c251ab775|Linear Actuator]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | EEPROM
-| Creates a linear actuator that can be used with the various motor components via a coupling or gearbox.
 |-
-|width=30%|[[File:Component Icon 952471c7_11ca_430b_ab72_4fda8b195f83.png|Image]] [[Component: ID 952471c7_11ca_430b_ab72_4fda8b195f83|Motor Template]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID dcbf571f_a6fa_402d_bdd4_be00cca4070f|EEPROM]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Base component for constructing continuous motion - e.g. motors.Automatically animates two objects - one within the same host components (e.g. moving partsof the motor itself), and one external (e.g. the mechanism to which the motor is connected).
 |-
-|width=30%|[[File:Component Icon 9202a62e_0a42_4780_adce_16b701e5ec53.png|Image]] [[Component: ID 9202a62e_0a42_4780_adce_16b701e5ec53|Servo Motor Controller]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d96f06b4_e7cc_4222_831e_520b53cfa278|EEPROM (DS28E07)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Can control up to eight standard PWM driven servo's.Supports 8-bit and 16-bit movement resolutions.'Servo Object' properties allow you to connect the controller to on-screen simulations using the "Servo Motor" component and its derivatives.
 |-
-|width=30%|[[File:Component Icon fbad3c39_8c38_49b7_a860_ae37e9b979a2.png|Image]] [[Component: ID fbad3c39_8c38_49b7_a860_ae37e9b979a2|Servo Motor Template]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 06829bc6_9e27_4353_9d95_3ba9dabc3384|Flash EEPROM]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Base component for creating custom servo motor simulations.Recieves messages  from the the 'Servo Controller' component.Macro 'SetTarget' allows external objects to be moved by the servofor mechanical simulations.
 |-
-|width=30%|[[File:Component Icon eb1db17a_1c6c_44ef_84d0_d718549343c4.png|Image]] [[Component: ID eb1db17a_1c6c_44ef_84d0_d718549343c4|Solenoid Template]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 7bbc8b49_5f3d_419e_8b25_4ea4c93467b6|IButton (DS1990)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Base component for constructing solenoids.These take a single input pin and move an actuator between two positions depending onthe pin state.
 |-
-|width=30%|[[File:Component Icon faf668b1_a0e6_426f_b1ef_9d4f8e54d784.png|Image]] [[Component: ID faf668b1_a0e6_426f_b1ef_9d4f8e54d784|Stepper Motor Template]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID fdb712e0_3861_4e64_9c68_67eade64b089|Serial EEPROM (24C01 - 24C16)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Enables the creation of a stepper motor component by specifying objects for its appearance.'Attach to...' property should be exposed in any components buit from this -this sets a target object to be joined to the motor shaft.The target can then be rotated around the axis with a custom gear ration, or moved linearlyaccording to the pitch of a given lead screw.
-|}
-==Displays==
-===Alphanumeric===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 672cb410_6026_403b_aff7_0628fe9e8140.png|Image]] [[Component: ID 672cb410_6026_403b_aff7_0628fe9e8140|LCD (Adafruit, 16x2)]]
-| Adafruit OLED LCD display capable of displaying 2 lines of 16 characters.
 |-
-|width=30%|[[File:Component Icon 913991df_9bcb_475a_ae49_d9eb611b0d71.png|Image]] [[Component: ID 913991df_9bcb_475a_ae49_d9eb611b0d71|LCD (Adafruit, 20x4)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 35934f36_5cda_49e7_b1a0_05c85722d858|Serial EEPROM (24C32)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Adafruit OLED LCD display capable of displaying 4 lines of 20 characters.
 |-
-|width=30%|[[File:Component Icon 0953aac0_9c23_4c2f_9843_88954a4191ea.png|Image]] [[Component: ID 0953aac0_9c23_4c2f_9843_88954a4191ea|LCD (Generic)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4d9912c0_0f17_4fbe_9c76_09331167a886|Serial EEPROM (24LC512)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Generic configurable alphanumeric LCD display component based on the standard Hitachi HD44780 controller IC wiith selectable 4/8 bit interface
 |-
-|width=30%|[[File:Component Icon 3cf64267_8c56_47b0_84a1_a933a77716bc.png|Image]] [[Component: ID 3cf64267_8c56_47b0_84a1_a933a77716bc|LCD I2C (LCM1602)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b92e8950_9c7f_4769_abc0_be85f2b1452d|Serial EEPROM (93C46)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Generic alphanumeric LCD display based on the standard Hitachi HD44780 controller IC.Connected using an I2C based PCF8574 IO Expander IC.
-|}
-===Graphical Color===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon b0f3982e_7ca6_4504_afe5_1b76fa09fad1.png|Image]] [[Component: ID b0f3982e_7ca6_4504_afe5_1b76fa09fad1|Drawing Area]]
-| Simulation runtime only graphical display component designed for SCADA operations.Allows easy pixel based displays and support for the GLCD libraries such as bitmap drawer and textfield.
 |-
-|width=30%|[[File:Component Icon 07698cde_7f30_419b_825c_35450877ad26.png|Image]] [[Component: ID 07698cde_7f30_419b_825c_35450877ad26|GLCD (4D Goldelox)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c8b6350e_b89a_4ad0_8669_e9387e24599e|Serial Flash (W25)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the Goldelox range of displays from 4D Systems.
 |-
-|width=30%|[[File:Component Icon 44f742f7_3039_4edb_8e96_717377b85e69.png|Image]] [[Component: ID 44f742f7_3039_4edb_8e96_717377b85e69|GLCD (4D Picaso v1) (EB076)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | File
-| Graphical display component designed to work with the Picaso range of displays from 4D Systems.Component based around the uLCD-32PT display.
 |-
-|width=30%|[[File:Component Icon b710c9a3_b93a_407d_81b2_190b5f6afdf1.png|Image]] [[Component: ID b710c9a3_b93a_407d_81b2_190b5f6afdf1|GLCD (4D Picaso v2) (EB076)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 7d0c33a1_0aaa_4250_84bb_f96fc113abac|CSV Read/Write]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the Picaso range of displays from 4D Systems.Component based around the uLCD-32PTU display.
 |-
-|width=30%|[[File:Component Icon 79f105db_3eb0_45cb_b3fb_e4b6d6e94358.png|Image]] [[Component: ID 79f105db_3eb0_45cb_b3fb_e4b6d6e94358|GLCD (ILI9163C)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 42f3f8ef_ff5b_44e6_9be8_8c43d9ab5b08|Embed File]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the ILI9163C 16-bit colour graphical controller IC.
 |-
-|width=30%|[[File:Component Icon 7bd84555_ae51_40cc_8e1a_a7bcba661e52.png|Image]] [[Component: ID 7bd84555_ae51_40cc_8e1a_a7bcba661e52|GLCD (ILI9341 SPI)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a61211f1_3718_4d37_b4a4_c6193646ccfd|File (ESP32 SDMode)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the ILI9341 controller ICBased on the ILI9341 16-bit colour graphical controller IC.Uses the SPI CAL component to allow for faster serial display communications.
 |-
-|width=30%|[[File:Component Icon bc0a0612_ef85_48fb_8960_5e78f4083df1.png|Image]] [[Component: ID bc0a0612_ef85_48fb_8960_5e78f4083df1|GLCD (ILI9341)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 900b40e1_a72c_445c_9ec4_eff95cd6c377|File (RPI)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the ILI9341 controller ICBased on the ILI9341 16-bit colour graphical controller IC.Supports Serial, 8-bit and 16-bit interface modes.
 |-
-|width=30%|[[File:Component Icon 641b19bc_b941_46de_843d_229ca347466d.png|Image]] [[Component: ID 641b19bc_b941_46de_843d_229ca347466d|GLCD (LS020)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0b61bd39_05a3_46ee_a2a5_da7bffb583c5|File (SD/SDHC Card)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the LS020 display as used on the Siemens S65.
 |-
-|width=30%|[[File:Component Icon 0a432f5f_d9a0_4726_9b42_18de4eeddfd8.png|Image]] [[Component: ID 0a432f5f_d9a0_4726_9b42_18de4eeddfd8|GLCD (SSD1289)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Real Time Clock
-| Graphical display component based on the SSD1289 16-bit colour graphical controller IC.
 |-
-|width=30%|[[File:Component Icon e635704b_9d69_466c_be7f_a03543f011a6.png|Image]] [[Component: ID e635704b_9d69_466c_be7f_a03543f011a6|GLCD (SSD1331) (SSD1331)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 920175dd_ace8_49e2_9208_ec548563c9c0|Real Time Clock (ESP32)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component based on the SSD1331 colour graphical controller IC.
 |-
-|width=30%|[[File:Component Icon 8af7f5ec_2e7a_4080_9566_b816c24ebbfa.png|Image]] [[Component: ID 8af7f5ec_2e7a_4080_9566_b816c24ebbfa|GLCD (SSD1351 SPI)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f0e01201_8951_4748_87c3_d1f8423bb6e4|Real Time Clock (Internal, DS1307, DS3231, DS3232)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component based on the SSD1351 16-bit colour graphical controller IC.Controlled using Hardware or Software SPI to acheive high speed communications.
 |-
-|width=30%|[[File:Component Icon fd1a193b_149f_4ba8_b1ce_ce39ca863975.png|Image]] [[Component: ID fd1a193b_149f_4ba8_b1ce_ce39ca863975|GLCD (SSD1351)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c48dfdeb_1177_4381_86dd_d7a98fefeb7a|Real Time Clock (MCP7940N)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component based on the SSD1251 16-bit colour graphical controller IC.
 |-
-|width=30%|[[File:Component Icon 9d414a42_fd9b_4afd_9493_dbf80eece14a.png|Image]] [[Component: ID 9d414a42_fd9b_4afd_9493_dbf80eece14a|GLCD (SSD1963) Parallel]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Utility
-| Graphical display component designed to work with the SSD1963 controller ICBased on the SSD1963 16-bit colour graphical controller IC.
 |-
-|width=30%|[[File:Component Icon 4e30b15e_2507_4583_995d_b2056e04a286.png|Image]] [[Component: ID 4e30b15e_2507_4583_995d_b2056e04a286|GLCD (ST7789V)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 34f258e1_5c8c_4519_b29d_aba7cbf41faf|Advanced String Functions]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the ST7789V 16-bit colour graphical controller IC.
 |-
-|width=30%|[[File:Component Icon a00b9a94_9608_4208_af26_68a94dab336b.png|Image]] [[Component: ID a00b9a94_9608_4208_af26_68a94dab336b|GLCD (STM32F429ZI) (STM32F429ZI)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 1911d96c_78dd_414a_b23c_6691fb19f63f|Auto Version Identifier]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the STM32F429ZI Discovery board from ST. Compatible with the large display and resistive touch input.
 |-
-|width=30%|[[File:Component Icon 5bd73e47_8060_4677_a1a3_6191ceb924b7.png|Image]] [[Component: ID 5bd73e47_8060_4677_a1a3_6191ceb924b7|GLCD (STM32F469NI) (STM32F469NI)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID dfb4d07a_3d70_45d5_83ef_07e3c95d86ab|Lookup tables]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the STM32F469NI Discovery board from ST. Compatible with the large display and capacitive touch input.
 |-
-|width=30%|[[File:Component Icon 6a2520bc_d8dd_4001_937e_21925253291a.png|Image]] [[Component: ID 6a2520bc_d8dd_4001_937e_21925253291a|GLCD (STM32F746NG) (STM32F746NG)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a8abdc98_224c_4c8a_8311_2921cb3dbe46|String Initialiser]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the STM32F746NG Discovery board from ST. Compatible with the large display and capacitive touch input.
 |-
-|width=30%|[[File:Component Icon 756045fb_388b_4dbb_8f10_5136de8bfacb.png|Image]] [[Component: ID 756045fb_388b_4dbb_8f10_5136de8bfacb|Nextion Display]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 306b3759_a92f_4779_b15f_93a9e35a75bf|String Translator]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simple libray to interface a Nextion display.The elements on the nextion display are built using the Nextion  Editor software and uploaded to the display.The component can then interact with the display elements.
 |-
-|width=30%|[[File:Component Icon 7c3895d3_0359_4b4c_8fa4_ab6314cd5fbf.png|Image]] [[Component: ID 7c3895d3_0359_4b4c_8fa4_ab6314cd5fbf|Raspberry Pi HDMI]]
-| Graphical display component designed to work with the HDMI screen output of the Raspberry Pi
 |}
-===Graphical Library===
+</tab>
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon cbfb3c21_f13d_488d_9b90_400c8d4fc605.png|Image]] [[Component: ID cbfb3c21_f13d_488d_9b90_400c8d4fc605|Display Manager]]
+<tab name="Math">
-| A component designed to simplify the process of drawing primitives and text onto a graphical display. Keeps track of coordinates so you don't have to.Also works great as a base layer for gLCD based games as it will check for collisions and perform movement.
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Calculation
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a78483e1_b293_47e7_984c_55984fc93571|Base 64]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 9a2a044c_10f5_437c_b5fa_0ec949130f36|Linear Feedback Shift Register]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ccdce31d_a1a3_437a_88ba_5431745ddf6e|Map Function]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b3061d15_325b_4a8f_863a_a059fab79caf|Median 16-bit]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f2e05e6d_1864_465b_8d1d_0fc9238a7535|Median 32-bit]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c211fc8f_6f17_461f_a44b_01dbc2368fbe|Median Float]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e4dbf608_6521_4e08_a1f5_46b012fc8cc1|Standard Deviation]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 6508c7be_063a_4f9f_bae5_4a41cf977a86|Type Conversions]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon b02b7c75_53cb_4be4_871f_61be633d898c.png|Image]] [[Component: ID b02b7c75_53cb_4be4_871f_61be633d898c|GLCD Bitmap Drawer FAT]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Timing
-| A component to simplify the process of drawing bitmap images to a graphical display.Reads Bitmap files directly from a SD card formatted with a FAT file system.Compatible with 24-bit &  Monochrome Bitmaps.The gLCD object property specifies which LCD component to draw the bitmap to.Compatible with GLCD, NeoPixel, MIACv3, HT16K33
 |-
-|width=30%|[[File:Component Icon 52dd90bd_fec9_4ee5_934c_e4b2297168a5.png|Image]] [[Component: ID 52dd90bd_fec9_4ee5_934c_e4b2297168a5|GLCD Bitmap Drawer ROM]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ec64c307_3099_485b_bd55_052a5da95128|PIC32 Core Timer]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A component to simplify the process of drawing bitmap images to a graphical display.Stores up to 10 bitmap images inside ROM based look up tables.Compatible with 24-bit / 256 Colour / 16 Colour /  Monochrome Bitmaps.The gLCD object property specifies which LCD component to draw the bitmap to.Compatible with GLCD, NeoPixel, MIACv3, HT16K33
 |-
-|width=30%|[[File:Component Icon d4994410_ca95_4d1c_8d57_542d48a21d58.png|Image]] [[Component: ID d4994410_ca95_4d1c_8d57_542d48a21d58|GLCD Graph Creator]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a871ac1d_7a58_4474_a08b_c9c9017cd2ed|STM32 Timer]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A component to simplify the process of drawing graphs and charts using a graphical LCD.
 |-
-|width=30%|[[File:Component Icon 7b198227_81d6_404c_a2d4_ce1e59ef84f8.png|Image]] [[Component: ID 7b198227_81d6_404c_a2d4_ce1e59ef84f8|GLCD Graph Creator XY]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d7633558_54a4_47ff_8c00_95170632c57e|Timed Interval]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A component to simplify the process of drawing XY graphs and charts using a graphical LCD.
 |-
-|width=30%|[[File:Component Icon 9e0fa7e4_0c8c_485d_98c4_6f0ef8e57d40.png|Image]] [[Component: ID 9e0fa7e4_0c8c_485d_98c4_6f0ef8e57d40|GLCD Textfield]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 24ad2718_c70b_4088_aeda_3949dfdba740|Timer]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A component to simplify the process of drawing text to a graphical display.Allows the graphical LCD to be used more like a standard alphanumeric display.Compatible with the Graphical LCDs.
 |-
-|width=30%|[[File:Component Icon 1b08885c_807e_4631_930e_a4fef06159dc.png|Image]] [[Component: ID 1b08885c_807e_4631_930e_a4fef06159dc|gLCD Font Library]]
-| A component designed to simplify the task of creating dynamic fonts for use with graphical displays.
 |}
-===Graphical Monochrome===
+</tab>
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 8a7a90d2_3274_4433_8609_699e976e0719.png|Image]] [[Component: ID 8a7a90d2_3274_4433_8609_699e976e0719|GLCD (Grove OLED) (OLED 1.12&quot;)]]
+<tab name="DSP">
-| Graphical display component based on the Seed Studio Grove OLED 1.12" and 0.96" monochrome displays.Functions without the use of a read back by hosting the graphical memory using the microcontroller's RAM memory.
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | DSP Inputs
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID fdef1c85_689b_4e44_81dc_7ab15dec21a6|Data Queue to Bits]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3420d1ea_bc10_4727_8419_746101b8dc13|Input ADC]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 73c1c565_8d04_44dd_ab78_1997d5e3c641|Input CSV]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c73d493a_b6a0_4dbe_b4b5_79648f67d11e|Input Digital]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 8d6ffd33_4087_46b5_8dfd_f43513748755|Input Digital Pin]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c7648111_2a14_475e_980d_c7106ff9d3d0|Quadrature Generator]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID cbe42abc_5955_44da_a6d0_03e7cbcdcaca|Waveform Generator]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | DSP Outputs
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 44e22c6d_4e79_4eb3_b2e1_7ff2fecb3e08|Bits to Data Queue]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e648c3de_ec39_4a3f_bbd9_46e45cce4a63|Level]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 5142bd81_abad_444b_b6db_36a87dce5835|Output CSV]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4483da18_fa5a_4436_9edb_0cfb55a4bce1|Output DAC]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 1392d5c3_35ba_4c7f_a539_7f30a09758e4|Output Digital]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0d048c7d_18d5_4bce_83f1_7e429c0d86b6|Output Digital Pin]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 649f4bc2_1360_4629_82aa_62e2fc32d4e4|Output PWM]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon c9d3b357_b914_4301_a741_0d13819e441c.png|Image]] [[Component: ID c9d3b357_b914_4301_a741_0d13819e441c|GLCD (KS0108)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e79a4b4d_cb5a_4e46_a0d5_d23479e90036|Output Port]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the KS0108 type monochrome displays.Also compatible with the newer S6A0107 controller IC displays.
 |-
-|width=30%|[[File:Component Icon a1edc3df_71d0_4ec5_a511_05818570696f.png|Image]] [[Component: ID a1edc3df_71d0_4ec5_a511_05818570696f|GLCD (PDC8544) (PCD8544)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | DSP Operators
-| Graphical display component based on the PCD8544 monochrome graphical controller IC as used on the popular Nokia 5510 displays.Functions without the use of a read pin by hosting the 1K of graphical memory using the microcontroller's RAM memory.
 |-
-|width=30%|[[File:Component Icon ebf9c18e_044e_41e2_b845_da14e744b25f.png|Image]] [[Component: ID ebf9c18e_044e_41e2_b845_da14e744b25f|GLCD (SH1106) I2C]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 104899e2_8b2e_4854_923c_5a614c1b8a3c|Adder]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the SH1106 type monochrome displays.Transfers data using a 2-wire I2C interface.
 |-
-|width=30%|[[File:Component Icon 91c1b7f5_6974_4ea3_84b3_4e24a9784631.png|Image]] [[Component: ID 91c1b7f5_6974_4ea3_84b3_4e24a9784631|GLCD (SH1106) SPI]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d347e8eb_a0f2_45d5_8f31_7aba7f4e56b7|Averager]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the SH1106 type monochrome displays.Transfers data using a 4-wire SPI interface.
 |-
-|width=30%|[[File:Component Icon 5ed21fc4_3979_4825_8c8e_95944d1101d9.png|Image]] [[Component: ID 5ed21fc4_3979_4825_8c8e_95944d1101d9|GLCD (SSD1305) (SSD1305)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0b1d97c1_ee89_45a5_8c39_114cd6d552ad|Deinterlace]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component based on the SSD1305 monochrome graphical controller IC.
 |-
-|width=30%|[[File:Component Icon 8fccb5eb_1664_4dd5_9d2e_5c62294a7151.png|Image]] [[Component: ID 8fccb5eb_1664_4dd5_9d2e_5c62294a7151|GLCD (SSD1305) Buffered (SSD1305)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e0ddc704_6bab_4d08_8f10_19a14c6683ef|Delay]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component based on the SSD1305 monochrome graphical controller IC.Functions without the use of a read pin by hosting the 1K of graphical memory using the microcontroller's RAM memory.
 |-
-|width=30%|[[File:Component Icon 7b1ef6f5_5c39_4b7f_9faf_eed122ff2b3e.png|Image]] [[Component: ID 7b1ef6f5_5c39_4b7f_9faf_eed122ff2b3e|GLCD (SSD1306) (SSD1306)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f804a7bd_0280_4ff7_ab75_63be77fb2af3|Fast Fourier Transform (FFT)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component based on the SSD1306 monochrome graphical controller IC.
 |-
-|width=30%|[[File:Component Icon 9e067700_36d1_4697_a165_9e8d60b45399.png|Image]] [[Component: ID 9e067700_36d1_4697_a165_9e8d60b45399|GLCD (SSD1306) Buffered (SSD1306)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 317efb6a_2bad_4f83_a0bc_4ada0f4cd51e|Filter]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component based on the SSD1306 monochrome graphical controller IC.Functions without the use of a read pin by hosting the 1K of graphical memory using the microcontroller's RAM memory.
 |-
-|width=30%|[[File:Component Icon f6ab6074_68ba_4cd4_9274_f973102f8518.png|Image]] [[Component: ID f6ab6074_68ba_4cd4_9274_f973102f8518|GLCD (SSD1306) I2C (SSD1306)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 23b8de7f_5214_4f77_9bac_4982123b8d4b|Interlace]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component based on the I2C version of the SSD1306 monochrome graphical controller IC.Functions without the use of a read pin by hosting the 1K of graphical memory using the microcontroller's RAM memory.
 |-
-|width=30%|[[File:Component Icon 4ce64477_fd81_4ed6_ba31_176465949fd0.png|Image]] [[Component: ID 4ce64477_fd81_4ed6_ba31_176465949fd0|GLCD (SSD1306) SPI (SSD1306)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 83fac7ac_b7b5_4cc4_890a_394cbf16cf71|Kalman Filter]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component based on the SPI version of the SSD1306 monochrome graphical controller IC.Functions without the use of a read pin forcing the data to be written a byte at a time.
 |-
-|width=30%|[[File:Component Icon f0f2f410_3216_4a3f_a2dc_db35f4a2821d.png|Image]] [[Component: ID f0f2f410_3216_4a3f_a2dc_db35f4a2821d|GLCD (SSD1322) Buffered (SSD1322)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 82872714_f0f0_4758_91ec_bd39d2cdddc8|Math]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component based on the SSD1322 monochrome graphical controller IC.Functions without the use of a read pin by hosting the 2K of graphical memory using the microcontroller's RAM memory.
 |-
-|width=30%|[[File:Component Icon dba19ea1_efe2_46e4_90be_18ee41930d1e.png|Image]] [[Component: ID dba19ea1_efe2_46e4_90be_18ee41930d1e|GLCD (SSD1322) Parallel]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID facc8c89_963a_408e_985e_ed768a52b01a|Median]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the SSD1322 type monochrome displays.Compatible with 6800 and 8080 type 8-bit parallel displays.
 |-
-|width=30%|[[File:Component Icon 496cf2f0_4220_4f70_9219_7c67c672e36e.png|Image]] [[Component: ID 496cf2f0_4220_4f70_9219_7c67c672e36e|GLCD (ST7036) I2C (ST7036)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a9e01aa0_f224_4902_a558_6a199fc039c5|Multiplex]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component based on the I2C version of the ST7036 monochrome graphical controller IC.Functions without the use of a read pin by hosting the 1K of graphical memory using the microcontroller's RAM memory.
 |-
-|width=30%|[[File:Component Icon 889a6ac6_12d0_40c0_9882_075ce9801eeb.png|Image]] [[Component: ID 889a6ac6_12d0_40c0_9882_075ce9801eeb|GLCD (ST7565R) Parallel]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 88a7dbc4_af92_4205_8943_abaa77504462|Offset]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the ST7565 type monochrome displays.Transfers data using an 8-bit digital data bus.
 |-
-|width=30%|[[File:Component Icon 2149fdef_84e9_407d_b68d_fc7f39e6f41e.png|Image]] [[Component: ID 2149fdef_84e9_407d_b68d_fc7f39e6f41e|GLCD (ST7565R) SPI]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 34b6f31b_7e33_4beb_891e_defacbee8587|On/Off Control]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the ST7565 type monochrome displays.Transfers data using a 4-wire SPI interface, cannot read back so pixel based routines won't work.
 |-
-|width=30%|[[File:Component Icon 7e19b0ee_6cfd_49d3_8efb_67e7b145dfba.png|Image]] [[Component: ID 7e19b0ee_6cfd_49d3_8efb_67e7b145dfba|GLCD (ST7567) SPI]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e6dd1315_4acf_4fb5_abd9_5743d3715cbe|PID Control]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the ST7567 type monochrome displays.Transfers data using a 4-wire SPI interface, cannot read back so pixel based routines won't workNot for public release.
 |-
-|width=30%|[[File:Component Icon 804de427_4b97_4468_9ea9_b5adf7b98771.png|Image]] [[Component: ID 804de427_4b97_4468_9ea9_b5adf7b98771|GLCD (ST7920) Parallel]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 939a5d54_28c7_488d_af39_46f7c5d2c429|Rectifier]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the ST7920 ype monochrome displays.Transfers data using an 8-bit digital data bus.
 |-
-|width=30%|[[File:Component Icon c9d3b357_b914_4301_a741_0d13819e452e.png|Image]] [[Component: ID c9d3b357_b914_4301_a741_0d13819e452e|GLCD (T6963C)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f1af5256_1dee_491c_b43f_fdc8f33279fb|Scale]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A Graphical LCD component to drive displays fitted with a T6963C controller IC.
 |-
-|width=30%|[[File:Component Icon 71ba0cdd_e003_4f6d_9dae_8eecffd1774b.png|Image]] [[Component: ID 71ba0cdd_e003_4f6d_9dae_8eecffd1774b|GLCD (TLS8201)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 907f24e9_a8a3_46ea_942d_67dc55f7eb44|Simulated Control Load]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A Graphical LCD component to drive displays fitted with a TLS8201 controller IC.
 |-
-|width=30%|[[File:Component Icon ebd426a3_c694_42bb_8611_320e27c6ea65.png|Image]] [[Component: ID ebd426a3_c694_42bb_8611_320e27c6ea65|GLCD (UC1701) (UC1701)]]
-| Graphical display component based on the UC1701 monochrome graphical controller IC.
 |}
-===Segment===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon d9e86781_7fa0_4e64_9f82_ef49152611b0.png|Image]] [[Component: ID d9e86781_7fa0_4e64_9f82_ef49152611b0|4_Digit Display (Grove 104030003) (104030003)]]
+</tab>
-| Quad seven segment display using an two pin communications bus to reduce the number of control pins.Based on the Grove module 104030003.
+<tab name="Comms">
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
 |-
-|width=30%|[[File:Component Icon bddc472f_59dc_4705_997e_662768d643cd.png|Image]] [[Component: ID bddc472f_59dc_4705_997e_662768d643cd|7Segment (74HC595)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Comms: Interface
+|-
-| Seven segment display using 74HC595 serial to parallel shift register.Requires three standard output pins to drive the shift register.Shift registers can be chained together to drive up to six individual 7-segment displays.
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID da332928_6342_4c2c_afc7_eaf33917d33e|CAN (Internal, MCP2515)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 24219805_113d_4b12_b6bd_e1b0b0c33981|I2C Master]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID eac43fda_0bc5_4b08_881c_6d3e364f2eff|I2C Slave]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 081af1a1_da0b_426d_9ca6_58d8313d1499|I2S Master/Slave ESP32]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 4de4697e_2de3_432e_a0fe_97ef8c79dfc0.png|Image]] [[Component: ID 4de4697e_2de3_432e_a0fe_97ef8c79dfc0|7Segment (Hex TM1637)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 63de6312_8008_46d2_8a0c_bb66e56674e2|LIN Master]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Hex seven segment display using an two pin communications bus to reduce the number of control pins.Also provides up to 16 individual input switches.Driven using a TM1637 hex 7-segment display driver.
 |-
-|width=30%|[[File:Component Icon e2c3165d_8020_4e52_bc7e_7022ff459129.png|Image]] [[Component: ID e2c3165d_8020_4e52_bc7e_7022ff459129|7Segment (Quad TM1637)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 822ce79d_3339_4d92_bd2b_abae0ba3b780|LIN Slave]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Quad seven segment display using an two pin communications bus to reduce the number of control pins.Driven using a TM1637 quad 7-segment display driver.
 |-
-|width=30%|[[File:Component Icon f4400e36_dd95_4472_86da_4bba68d68d5d.png|Image]] [[Component: ID f4400e36_dd95_4472_86da_4bba68d68d5d|7Segment (Quad)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 43861adb_8a59_492d_8f9f_a08775800bc1|MULTIUART]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| 14mm seven segment display. LED colour can be set from properties.
 |-
-|width=30%|[[File:Component Icon 52c5383b_4f48_4029_8b75_c3633f7cf892.png|Image]] [[Component: ID 52c5383b_4f48_4029_8b75_c3633f7cf892|7Segment (Single)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 64b26b13_68cf_4a92_8616_e882b7c71023|One Wire]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Seven segment display modelled after a standard 14mm high unit.LED colour can be changed in properties.
 |-
-|width=30%|[[File:Component Icon 5015c7e1_2166_4f1a_b9b1_9bd181784cea.png|Image]] [[Component: ID 5015c7e1_2166_4f1a_b9b1_9bd181784cea|Starburst Display]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 55831e22_7885_4e0f_a9de_73ebda9d7fe9|One Wire (DS2482)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Starburst 14 or 16 segment display modelled after a standard 14mm high unit.LED colour can be changed in properties.
-|}
-==Sensors==
-===Audio===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 0a5d4625_78e6_4bf3_a802_925c655ef718.png|Image]] [[Component: ID 0a5d4625_78e6_4bf3_a802_925c655ef718|Heelight Sensor (Grove 101020312) (101020312)]]
-| Heelight Sensor is a smart voice sensor that can recognize up tp 500 digital voice commands. It was originally used on the Heelight – a smart colorful bulb that can be controlled by digital sound waves. Allows you to realize smart control in your own projects.Compatible with Heelight smart phone apps and other Heelight controllers.
 |-
-|width=30%|[[File:Component Icon 3bb0eba4_8ae3_442b_8653_507d1bde8be0.png|Image]] [[Component: ID 3bb0eba4_8ae3_442b_8653_507d1bde8be0|Sound Sensor (Grove 101020023) (101020023)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 96862c4d_debc_45fa_9433_74711a4b9a3b|SPI Master]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment.
 |-
-|width=30%|[[File:Component Icon 06c52475_f44f_41f3_aae7_9ddeee44fc06.png|Image]] [[Component: ID 06c52475_f44f_41f3_aae7_9ddeee44fc06|Ultrasonic Ranger (Grove 101020010) (101020010)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e2955f6c_d724_4ab0_afca_d62093a77248|SPI Slave]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| The ultrasonic sensor is a non-contact distance measurement module. It's designed for easy modular project usage with industrial performance.Detecting range: 3cm to 4m, best in 30 degree angle.
-|}
-===Environmental===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon a9eb79b0_1d24_4acf_aade_d3639aa800c7.png|Image]] [[Component: ID a9eb79b0_1d24_4acf_aade_d3639aa800c7|Barometer (BME280)]]
-| A small PCB surface mount barometric pressure sensor with a I2C bus interface.Pressure range 300 to 1100 hPa. Temperature range -40 to +85 °C.Works with I2C interface only.
 |-
-|width=30%|[[File:Component Icon ca60c1d2_fb77_4e3e_9d01_c4496d35db1e.png|Image]] [[Component: ID ca60c1d2_fb77_4e3e_9d01_c4496d35db1e|Barometer (DPS310)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c73616d1_7ad0_45d9_aada_69ccfa4c5efc|UART (RS232)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A barometric air pressure sensor with high accuracy and low current consumption.Capable of sensing air pressure and temperature.Based on an I2C bus connection.
 |-
-|width=30%|[[File:Component Icon b52758bf_4466_48c0_8054_33ee4b11e82b.png|Image]] [[Component: ID b52758bf_4466_48c0_8054_33ee4b11e82b|Barometer (Grove 101020192) (101020192)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 743ea495_34e7_47ee_bd79_3bfdc067b01c|UART Software (Timer)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Barometric pressure sensor with a I2C bus interface.Pressure range 300 to 1100 hPa. Temperature range -40 to +85 °C.
 |-
-|width=30%|[[File:Component Icon b8c43425_121c_4dfc_8a70_665973e9938b.png|Image]] [[Component: ID b8c43425_121c_4dfc_8a70_665973e9938b|Barometer (MS5637)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Comms: System
-| A small PCB surface mount barometric pressure sensor with a I2C bus interface.Pressure range 0 to 30 Bar. Temperature range -20 to +85 °C.
 |-
-|width=30%|[[File:Component Icon 40785d28_4fe3_4aec_a5d9_ba30b2d58760.png|Image]] [[Component: ID 40785d28_4fe3_4aec_a5d9_ba30b2d58760|Temp Humidity (DHT11)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 5aefac05_ee5e_4d51_9f31_05281900a97e|DALI Master]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| The DHT11 temperature and humidity sensor is a popular sensor allowing the ambient temperature and relative humidity to be monitored digitally.Humidity Range = 20% - 90% +/- 5%Temperature Range = 0 - 50 Degrees C +/- 2 Degrees C
 |-
-|width=30%|[[File:Component Icon 95a1525b_7e03_4836_8c09_59bf174f603b.png|Image]] [[Component: ID 95a1525b_7e03_4836_8c09_59bf174f603b|Temp Humidity (DHT22)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c714f39e_c8fb_413f_afda_2d169e655134|DALI Slave]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| The DHT22 temperature and humidity sensor is a popular sensor allowing the ambient temperature and relative humidity to be monitored digitally.Humidity Range = 0% - 100% +/- 2%Temperature Range = -40 - 80 Degrees C +/- 0.5 Degrees C
 |-
-|width=30%|[[File:Component Icon 0689100f_8b13_45a6_98a2_b9833b02eed5.png|Image]] [[Component: ID 0689100f_8b13_45a6_98a2_b9833b02eed5|Temp Humidity (Grove 101020019) (101020019)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b4e10f9e_4ea9_4fbc_a584_a4d7d4d8fba6|DMX-512 Master]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| The DHT22 temperature and humidity sensor is a popular sensor allowing the ambient temperature and relative humidity to be monitored digitally.Humidity Range = 0% - 100% +/- 2%Temperature Range = -40 - 80 Degrees C +/- 0.5 Degrees C
 |-
-|width=30%|[[File:Component Icon eca89720_1386_4589_ab75_6c0425162b91.png|Image]] [[Component: ID eca89720_1386_4589_ab75_6c0425162b91|Temp Humidity (Grove 101020212) (101020212)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 1be0ac44_3521_402e_a8b7_1faf86c09560|DMX-512 Slave]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Humidity and temperature sensor using an SHT31 IC connected via I2C.On screen GUI allows temperature and humidity values to be simulated, and will show allI2C communication in a console window.
 |-
-|width=30%|[[File:Component Icon 66e6f00d_d894_49de_a768_02997eaf45e1.png|Image]] [[Component: ID 66e6f00d_d894_49de_a768_02997eaf45e1|Temp Humidity (HTS221)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 5915b437_6925_4d90_a0f8_f91702837bdb|I2C Multiplexer (TCA9548A)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A temperature and relative humidity sensor allowing the ambient temperature and relative humidity to be monitored digitally.Humidity Range = 0% - 100% +/- 3.5%Temperature Range = -40 - 120 Degrees C +/- 0.5 Degrees C
 |-
-|width=30%|[[File:Component Icon 75d7da2a_c682_4622_ac86_b6eb9ed7a88e.png|Image]] [[Component: ID 75d7da2a_c682_4622_ac86_b6eb9ed7a88e|Temp Humidity (SHT21)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d04f4385_497d_4e46_a71d_2c0ccb4b0421|J1939 Automotive Node]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Humidity and temperature sensor using an SHT21 IC connected via I2C.On screen GUI allows temperature and humidity values to be simulated, and will show allI2C communication in a console window.
 |-
-|width=30%|[[File:Component Icon 4475d8e8_4f60_48be_8a27_e91d85fbabae.png|Image]] [[Component: ID 4475d8e8_4f60_48be_8a27_e91d85fbabae|Temp Humidity (SHT31)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a9b43242_9ccc_4f1c_b2d1_acdfbe420fc1|MIDI]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Humidity and temperature sensor using an SHT31 IC connected via I2C.On screen GUI allows temperature and humidity values to be simulated, and will show allI2C communication in a console window.
 |-
-|width=30%|[[File:Component Icon bbf0ab46_623e_44c6_9402_3acfcd9d0006.png|Image]] [[Component: ID bbf0ab46_623e_44c6_9402_3acfcd9d0006|Temperature (LM75B)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 47f6b39b_ead7_40f5_9931_8a79aa54014a|Modbus Master]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A digital temperature sensor based around the NXP LM75B chip.
 |-
-|width=30%|[[File:Component Icon 05acf53c_0b2e_4d26_8d5d_f112d4ce4c68.png|Image]] [[Component: ID 05acf53c_0b2e_4d26_8d5d_f112d4ce4c68|Temperature Infrared (Grove 101020062)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 687f8ad4_59f2_4079_bb84_7713dcb57a13|Modbus Slave]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| The Grove Infrared Temperature Sensor allows none contact measurement of temperaturesranging from -10 to 100 degrees C.
 |-
-|width=30%|[[File:Component Icon de8dcab3_c23b_48b4_a88e_3eb8b584109f.png|Image]] [[Component: ID de8dcab3_c23b_48b4_a88e_3eb8b584109f|Temperature Sensor (Grove 101020015) (101020015)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 2bff9939_f404_4915_8a51_59db53e5470e|Modbus Slave USB]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Temperature Sensor uses a thermistor to measure ambient temperature. The resistance of thermistor changes based on ambient temperature. This resistance value alters the output of a voltage divider which is measured by an analog input pin and converted to a temperature value. The operating range is -40 to 125°C , with an accuracy of 1.5°C .
 |-
-|width=30%|[[File:Component Icon 93ab1895_66cf_4fd8_a04f_79f09acc19e6.png|Image]] [[Component: ID 93ab1895_66cf_4fd8_a04f_79f09acc19e6|Thermistor]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 019e3dbb_2bfa_44a7_baf0_17b672d9b8f4|Modbus TCP Master]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A generic thermistor component that can be used to simulate and create code for anythermistor with a known temperature/resistance curve.  Thermistor is connected in a simplepotential divider circuit - thermistor between ADC input and 0V, and a fixed resistor betweenADC and the positive supply.  Default calibration is for the EBM003 module.
 |-
-|width=30%|[[File:Component Icon 60de8264_7faf_4f77_904e_69bb19909ba8.png|Image]] [[Component: ID 60de8264_7faf_4f77_904e_69bb19909ba8|Thermocouple ( MCP960X)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 1ecb9b0a_53e7_45c9_ab6f_7a0d4a0c47e1|Modbus TCP Slave]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Component to interface the MCP960X IC from Microchip.Uses a standard 2-wire I2C interface to connect to the IC and collect the temperature.IC available in different versions to suit different thermocouple types.
 |-
-|width=30%|[[File:Component Icon 97e631c7_51d9_4482_9b65_481b390a686d.png|Image]] [[Component: ID 97e631c7_51d9_4482_9b65_481b390a686d|Thermocouple (MAX31855)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 69c3c380_182a_4ba7_8043_9c9732b498fa|OBD2 ECU (Server)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Component to interface the MAX31855 IC from MAXIM.Uses a standard 3-wire SPI interface to connect to the IC and collect the temperature.IC available in different versions to suit different thermocouple types.
 |-
-|width=30%|[[File:Component Icon 4b57ccb5_9e55_4d0e_8961_43f6fcaec2d7.png|Image]] [[Component: ID 4b57ccb5_9e55_4d0e_8961_43f6fcaec2d7|Water Sensor (Grove 101020018) (101020018)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 6436a040_ccc8_46e5_82c1_68f8d87b16c5|Visi (4DSystems)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| The water sensor uses a 1M ohm pull-up resistor.The resistor will pull the sensor trace value high until a drop of water shorts the sensor trace to the ground trace.You can use it with an analog input pin to detect the amount of water in contactbetween the grounded and sensor traces.
-|}
-===Force===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon e8ec17bd_a898_44d2_83af_968c96826948.png|Image]] [[Component: ID e8ec17bd_a898_44d2_83af_968c96826948|Load Cell (HX711)]]
-| The HX711 load cell amplifier is used to get measurable data out from a load cell or strain gauge.
 |-
-|width=30%|[[File:Component Icon ab872cc0_e6fe_4d30_a7cb_a1efc6ae87a6.png|Image]] [[Component: ID ab872cc0_e6fe_4d30_a7cb_a1efc6ae87a6|Touch Screen (XPT2046)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Comms: IoT/Cloud
-| Low level routines for controlling or interacting with the XPT2046 touch screen controller IC foundon a lot of common low cost resistive touch screen products.
-|}
-===Light===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon d79f7da1_0e33_4fba_b4a0_ac127b5a4812.png|Image]] [[Component: ID d79f7da1_0e33_4fba_b4a0_ac127b5a4812|Beam Breaker]]
-| Automatically sets and resets a pin depending on whether a panel object breaksthe 'light beam'.Can also send simulation notification events.
 |-
-|width=30%|[[File:Component Icon a1ea988c_88c9_4f96_ac26_1684e918a3de.png|Image]] [[Component: ID a1ea988c_88c9_4f96_ac26_1684e918a3de|Colour Sensor (Grove 101020341) (101020341)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 72cd9559_26f7_4ffd_984c_cf3a82a6db16|BBC News]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Based on the color sensor TCS34725FN with digital output I2C. Based on the 8*2 array of filtered photodiodes and 16-bits analog-to-digital converters, you can gain the color chromaticity of ambient light or the color of objects. Of the 16 photodiodes, 4 have red filters, 4 have green filters, 4 have blue filters and 4 have no filter(clear). With the synchronization input pin, external pulsed light source can provides precise synchronous conversion control.
 |-
-|width=30%|[[File:Component Icon d8b85f99_8de3_41dd_9bab_f8bfc19e74af.png|Image]] [[Component: ID d8b85f99_8de3_41dd_9bab_f8bfc19e74af|Colour Sensor (TCS3200)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID df96ffa1_4d36_453a_8877_758f68a2676c|BBC Weather Forecast]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| This board provides the ability to detect colours using the TCS3200 sensor. It will return RGB and W values, dependent on the colour of the object under test.
 |-
-|width=30%|[[File:Component Icon e1d52efb_00d4_4e19_ba4c_29b292535ea1.png|Image]] [[Component: ID e1d52efb_00d4_4e19_ba4c_29b292535ea1|Infrared Array AMG88xx]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID bf90426c_1763_4a7a_be5c_b3e442e3f6d8|BBC Weather Observation]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| An 8x8 (64) Pixel infrared sensor array allowing basic none contact temperature detection.
 |-
-|width=30%|[[File:Component Icon f3b8eed1_fef6_4c1b_b62d_8efc84b1be35.png|Image]] [[Component: ID f3b8eed1_fef6_4c1b_b62d_8efc84b1be35|Infrared Reflective Sensor (Grove 101020174) (101020174)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 947089aa_ca9f_4e6f_9f86_7d49a1ae6f86|EtherCAT Slave (EasyCAT)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Uses InfraRed light to detect if an external object is near to the sensor. Returns a digital signal which can represent detected or not detected states.
 |-
-|width=30%|[[File:Component Icon 9c5b7454_e67d_4111_b220_bf8e5ff8b174.png|Image]] [[Component: ID 9c5b7454_e67d_4111_b220_bf8e5ff8b174|Light Sensor (Grove 101020132) (101020132)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 2740a93b_32a9_48d1_8fc3_089d13b50bb5|IoT Made Easy]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| The Light sensor module is a simple analogue photo transistor.Used to detect the intensity of the indoor light.
 |-
-|width=30%|[[File:Component Icon ccbd6829_44c8_4011_954b_c39dd93adbed.png|Image]] [[Component: ID ccbd6829_44c8_4011_954b_c39dd93adbed|PIR Motion (Grove 101020020) (101020020)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 6af7744a_76aa_4522_8cf1_05c8bd34859c|JSON Decoder]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| PIR motion sensor component for digital output sensors.Simulates range sensitivity and output hold.
 |-
-|width=30%|[[File:Component Icon 20a48db1_d91d_4c51_a49f_f878d0bcbad3.png|Image]] [[Component: ID 20a48db1_d91d_4c51_a49f_f878d0bcbad3|Photo Reflector]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f2ad060d_0ae3_43d2_9d82_f49eb4215240|JSON Encoder]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Uses InfraRed light to detect if an external object is near to the sensor. Returns a discrete analogue signal which can represent distance from the nearest object. Useful for applications like wall following, control based systems and robotics.
 |-
-|width=30%|[[File:Component Icon 6e5b4f6f_e2d9_4272_a854_749a762f55c1.png|Image]] [[Component: ID 6e5b4f6f_e2d9_4272_a854_749a762f55c1|Photo Transistor]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 459c9cfb_82e3_40ad_9456_54fc40ba5e6c|MQTT Client]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Uses InfraRed light to detect if an external object is near to the sensor. Returns a digital signal which can represent detected or not detected states. Useful for applications like line following, punched card based data systems and robotics.
-|}
-===Magnetic===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon c14492da_a844_40e6_ae29_50e58864b237.png|Image]] [[Component: ID c14492da_a844_40e6_ae29_50e58864b237|Hall Effect Analog]]
-| Simple analogue hall effect triggered by the proximity of another object.
 |-
-|width=30%|[[File:Component Icon 655234db_5700_4206_934f_56e499edbff9.png|Image]] [[Component: ID 655234db_5700_4206_934f_56e499edbff9|Hall Effect Digital]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Comms: Networking
-| Simple digital hall effect on off switch triggered by the proximity of another object.
 |-
-|width=30%|[[File:Component Icon 1c8bc72f_4944_4456_af99_9686c237d6b3.png|Image]] [[Component: ID 1c8bc72f_4944_4456_af99_9686c237d6b3|Reed Switch]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c2322067_51ae_4560_abcc_6469b1bdcccb|Hydro Encryption]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Simple on off switch triggered by the proximity of another object.
-|}
-===Movement & Orientation===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 940ad7e9_abab_434f_a5e3_ff50e2fdf962.png|Image]] [[Component: ID 940ad7e9_abab_434f_a5e3_ff50e2fdf962|Accel Gyro 6_Axis (Grove 105020012) (105020012)]]
-| Combined 6-Axis Accelerometer and Gyroscope sensors.Useful for working out data such as Pitch and Roll.Can be combined with a Magnetometer to also provide Yaw.
 |-
-|width=30%|[[File:Component Icon 75a362f4_d74d_48e7_9790_530f4d0e78b6.png|Image]] [[Component: ID 75a362f4_d74d_48e7_9790_530f4d0e78b6|Accel Gyro 6_Axis (MPU-6050)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 91049bf5_2436_42dc_947a_c30c86463d98|Network Communications]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| MPU-6050 Combined 6-Axis Accelerometer and Gyroscope sensors.Useful for working out data such as Pitch and Roll.Can be combined with a Magnetometer to also provide Yaw.
 |-
-|width=30%|[[File:Component Icon 20699a0c_0925_40c4_8aa1_35f294e225e6.png|Image]] [[Component: ID 20699a0c_0925_40c4_8aa1_35f294e225e6|Accel Gyro Mag 9_Axis (LSM9DS1)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 8aab4b54_a912_449c_b11a_7c1a5db8d591|TCP/IP (ENC28J60)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| LSM9DS1 Combined 9-Axis Accelerometer, Gyroscope and Magnetometer sensors. Useful for working out orientation data such as Pitch, Yaw and Roll.
 |-
-|width=30%|[[File:Component Icon 5d2c6406_e3aa_46bd_8144_57f60194a1e9.png|Image]] [[Component: ID 5d2c6406_e3aa_46bd_8144_57f60194a1e9|Accel Gyro Mag 9_Axis (MPU9250)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a1820de1_8cfe_4675_b185_a62ce44e2a6f|TCP/IP (NM7010A)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| MPU9250 Combined 9-Axis Accelerometer, Gyroscope and Magnetometer sensors. Useful for working out orientation data such as Pitch, Yaw and Roll.
 |-
-|width=30%|[[File:Component Icon db2c91d9_4fd5_42b8_98f4_76dfb160dece.png|Image]] [[Component: ID db2c91d9_4fd5_42b8_98f4_76dfb160dece|Accel Mag 6_Axis (LSM303D)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0341d84f_f7fd_473c_8076_b38b2d563e13|TCP/IP (Raspberry Pi)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| LSM303D Combined 6-Axis Accelerometer and Magnetometer sensors. Useful for working out data such as Pitch and Yaw.
 |-
-|width=30%|[[File:Component Icon d61dd6a6_231e_4244_9e8d_4f15e7ea10d5.png|Image]] [[Component: ID d61dd6a6_231e_4244_9e8d_4f15e7ea10d5|Accel Mag 6_Axis (LSM303DLHC)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e18e39d3_2e05_4a15_b8aa_e8ada16cd3ef|TCP/IP (W5500)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| LSM303DLHC Combined 6-Axis Accelerometer and Magnetometer sensors. Useful for working out data such as Pitch and Yaw.
 |-
-|width=30%|[[File:Component Icon 72f0a8c3_2b8f_4723_b22a_4a81873e5151.png|Image]] [[Component: ID 72f0a8c3_2b8f_4723_b22a_4a81873e5151|Accelerometer 3_Axis (LIS3LV02DQ)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d6db973b_a543_4743_91b5_176f9c6613df|TCP/IP (WIZ810MJ W5100)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| LIS3LV02DQ Accelerometer sensor with options for I2C or SPI communications. Useful for approximating Pitch and Roll or for detecting acceleration.Also available in the form of the EB068 Accelerometer E-block.
 |-
-|width=30%|[[File:Component Icon 447dabf8_4e39_46a5_a3d6_a02341bef0f0.png|Image]] [[Component: ID 447dabf8_4e39_46a5_a3d6_a02341bef0f0|Gyroscope 3_Axis (L3G4200D)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 66990164_3c50_4960_916d_327737a7a093|WLAN (ESP-12S)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Interface to the L3G4200D three axis digital gyroscope. Panel GUI can be used to simulateincoming data for testing.
 |-
-|width=30%|[[File:Component Icon 8e4553f8_fce7_4fed_80c1_33de9590a678.png|Image]] [[Component: ID 8e4553f8_fce7_4fed_80c1_33de9590a678|Gyroscope 3_Axis I2C (L3GD20)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f0f54e46_0848_4930_9bb6_eff9a34ed229|WLAN (ESP32)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Interface to the L3GD20 three axis digital gyroscope. Panel GUI can be used to simulateincoming data for testing.
 |-
-|width=30%|[[File:Component Icon 593b7216_0a11_465c_9cf5_3b809503a72c.png|Image]] [[Component: ID 593b7216_0a11_465c_9cf5_3b809503a72c|Gyroscope 3_Axis SPI (L3GD20)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e1bb4679_58ef_40dc_8d09_306ada46f7bf|WLAN (ESP8266)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows access to a three axis digital gyroscope via an SPI interface. Useful for gaming, VR, motion control, navitagion and robotics.
 |-
-|width=30%|[[File:Component Icon e4f1697e_5571_475a_a2b1_aa7243920422.png|Image]] [[Component: ID e4f1697e_5571_475a_a2b1_aa7243920422|Magnetometer (SM324)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a1c9b843_a641_4b9c_b762_26995b8f9464|Webserver (GENERIC - Flash / File)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| SM324 ultraprecise 24-bit smart magnetometer capable of distance measurement using a magnet. Controlled via I2C bus communications.
 |-
-|width=30%|[[File:Component Icon 4c2256c0_4453_4369_8c36_09770d223a09.png|Image]] [[Component: ID 4c2256c0_4453_4369_8c36_09770d223a09|Magnetometer 3_Axis (HMC5883L)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ff377ede_2c09_4a83_99a0_5e11c7ae16d9|Webserver (NM7010A)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| HMC5883L 3-Axis Magnetometer sensor. Useful for working out data such as compass orientation.
 |-
-|width=30%|[[File:Component Icon 03b98e89_8fee_466f_87b9_42b3b3e1cb41.png|Image]] [[Component: ID 03b98e89_8fee_466f_87b9_42b3b3e1cb41|Magnetometer 3_Axis (QMC5883L)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f77f2b22_6a7c_4ae6_9f5f_724660cc6c93|Webserver (W5500)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| QMC5883L 3-Axis Magnetometer sensor. Useful for working out data such as compass orientation.
-|}
-==DSP==
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 0b1d97c1_ee89_45a5_8c39_114cd6d552ad.png|Image]] [[Component: ID 0b1d97c1_ee89_45a5_8c39_114cd6d552ad|Deinterlace]]
-| Allows multiple output buffers to be deinterlaced from a single input buffer.Useful for decoding multiple buffer channels sent via communications or storage.
 |-
-|width=30%|[[File:Component Icon e0ddc704_6bab_4d08_8f10_19a14c6683ef.png|Image]] [[Component: ID e0ddc704_6bab_4d08_8f10_19a14c6683ef|Delay]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 9e68a715_edc2_4a98_be64_c0d02f700135|Webserver (WIZ810MJ)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows an adjustable delay to be inserted into the DSP system
 |-
-|width=30%|[[File:Component Icon f804a7bd_0280_4ff7_ab75_63be77fb2af3.png|Image]] [[Component: ID f804a7bd_0280_4ff7_ab75_63be77fb2af3|Fast Fourier Transform (FFT)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Comms: USB
-| Provides a way of converting a buffer full of time domain data into frequency domain data.The output of the FFT is a set of frequency bins which correspond to the frequencies present in the signal.The number of frequency bins is equal to half the input buffer size with each bin being responsible for a portion of the frequency up to 1/2 the nyquist.
 |-
-|width=30%|[[File:Component Icon 317efb6a_2bad_4f83_a0bc_4ada0f4cd51e.png|Image]] [[Component: ID 317efb6a_2bad_4f83_a0bc_4ada0f4cd51e|Filter]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 06a0a9b3_dd23_4592_a781_537a31b97c2a|USB HID]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Filter component to allow basic filtering to be performedFilters include: LowPass, HighPass, BandPass, BandStop, FIR, IIR
 |-
-|width=30%|[[File:Component Icon 3420d1ea_bc10_4727_8419_746101b8dc13.png|Image]] [[Component: ID 3420d1ea_bc10_4727_8419_746101b8dc13|Input ADC]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID fdceef06_919a_405b_8d0b_6118cd0e104c|USB MIDI]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows the values from a buffer to be assigned driectly from an analog enabled pin. Either a single sample at a time or a number of samples.Auto scales the digital value to fill the entire range of the specified buffer type.
 |-
-|width=30%|[[File:Component Icon 73c1c565_8d04_44dd_ab78_1997d5e3c641.png|Image]] [[Component: ID 73c1c565_8d04_44dd_ab78_1997d5e3c641|Input CSV]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3e28ac22_2855_410a_9660_0b0a4731e545|USB Serial]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows the values from a buffer to be collected directly from a CSV file.Either a value at a time or from an array.
 |-
-|width=30%|[[File:Component Icon c73d493a_b6a0_4dbe_b4b5_79648f67d11e.png|Image]] [[Component: ID c73d493a_b6a0_4dbe_b4b5_79648f67d11e|Input Digital]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 26cbc2df_5ef0_47db_ab2f_c2425b14462f|USB Slave]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows the values from a buffer to be assigned. Either a value at a time or from an array.The input signal would usually take the form of an ADC reading or raw data values.
 |-
-|width=30%|[[File:Component Icon 8d6ffd33_4087_46b5_8dfd_f43513748755.png|Image]] [[Component: ID 8d6ffd33_4087_46b5_8dfd_f43513748755|Input Digital Pin]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Wireless
-| Allows the values from a buffer to be assigned from a digital input pin. The input values for high and low state can be assigned using properties.
 |-
-|width=30%|[[File:Component Icon 23b8de7f_5214_4f77_9bac_4982123b8d4b.png|Image]] [[Component: ID 23b8de7f_5214_4f77_9bac_4982123b8d4b|Interlace]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID cff93310_545b_4948_a8fa_12b119c5f7a7|Bluetooth (EB024, Generic AT)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows multiple input buffers to be interlaced together into a single output buffer.Useful for combining several streams together for sending out via communications or storing.
 |-
-|width=30%|[[File:Component Icon 83fac7ac_b7b5_4cc4_890a_394cbf16cf71.png|Image]] [[Component: ID 83fac7ac_b7b5_4cc4_890a_394cbf16cf71|Kalman Filter]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 8be2ce64_4860_468a_aa8a_eac443274da3|Bluetooth (ESP32 SPP)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Provides a way of intelligently filtering noise from data to allow for better sensor approximations.
 |-
-|width=30%|[[File:Component Icon e648c3de_ec39_4a3f_bbd9_46e45cce4a63.png|Image]] [[Component: ID e648c3de_ec39_4a3f_bbd9_46e45cce4a63|Level]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a8dbe015_0985_4581_abd5_1cc44f576fab|Bluetooth (HC05 / HC06)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows for detection and collection of peaks, troughs and averages.
 |-
-|width=30%|[[File:Component Icon 82872714_f0f0_4758_91ec_bd39d2cdddc8.png|Image]] [[Component: ID 82872714_f0f0_4758_91ec_bd39d2cdddc8|Math]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0c7df3fc_a46f_4712_8cd3_77079978f4fc|Bluetooth (RN4677)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Component to combine together two DSP buffers into one an index at a time.Functions include: Add, Average, Difference, Max, Min, Subtract
 |-
-|width=30%|[[File:Component Icon facc8c89_963a_408e_985e_ed768a52b01a.png|Image]] [[Component: ID facc8c89_963a_408e_985e_ed768a52b01a|Median]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 76b3eb5c_2d23_4c8d_bde8_505032bc886a|Bluetooth v2 (EB024, Generic AT)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Collects the median value removing any potential high frequency spikes in the data.
 |-
-|width=30%|[[File:Component Icon a9e01aa0_f224_4902_a558_6a199fc039c5.png|Image]] [[Component: ID a9e01aa0_f224_4902_a558_6a199fc039c5|Multiplex]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 575a3a3f_09b8_46be_8069_c4d1894d7e7e|GPS (EB056, Generic NMEA)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows multiple input buffers to be multiplexed to a single output buffer.
 |-
-|width=30%|[[File:Component Icon 88a7dbc4_af92_4205_8943_abaa77504462.png|Image]] [[Component: ID 88a7dbc4_af92_4205_8943_abaa77504462|Offset]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0d02ccfd_4cda_42b8_91d8_5392f491f9af|GSM (EB066, Generic AT)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows the values in a single buffer to be offset uniformly.Functions include: Add, Subtract
 |-
-|width=30%|[[File:Component Icon 34b6f31b_7e33_4beb_891e_defacbee8587.png|Image]] [[Component: ID 34b6f31b_7e33_4beb_891e_defacbee8587|OnOff Control]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 2bfc8781_9817_4e0c_89f3_28dac37e9a62|IrDA (EB012, MCP1250, MCP2120)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| On/Off Control - Standard on off control as used on most ovens, toasters, irons.
 |-
-|width=30%|[[File:Component Icon 5142bd81_abad_444b_b6db_36a87dce5835.png|Image]] [[Component: ID 5142bd81_abad_444b_b6db_36a87dce5835|Output CSV]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ea261653_86e2_4c37_94f6_4151b318c6f5|LoRa (LAMBDA SX1272)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows the values from a buffer to be output directly into a .CSV format file. Either a value at a time or as an array.
 |-
-|width=30%|[[File:Component Icon 4483da18_fa5a_4436_9edb_0cfb55a4bce1.png|Image]] [[Component: ID 4483da18_fa5a_4436_9edb_0cfb55a4bce1|Output DAC]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 81e90a9f_1594_4b34_8aef_5dd671dddc30| RC5 (EB060, Generic 36KHz)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows the values from a buffer to be passed directly to an internal DAC output.
 |-
-|width=30%|[[File:Component Icon 1392d5c3_35ba_4c7f_a539_7f30a09758e4.png|Image]] [[Component: ID 1392d5c3_35ba_4c7f_a539_7f30a09758e4|Output Digital]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 45bd9065_b6f7_42be_b96f_28c3df2c0a22|RF ISM (EB063, MRF49XA)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows the values from a buffer to be read. Either a value at a time or as an array.
 |-
-|width=30%|[[File:Component Icon 0d048c7d_18d5_4bce_83f1_7e429c0d86b6.png|Image]] [[Component: ID 0d048c7d_18d5_4bce_83f1_7e429c0d86b6|Output Digital Pin]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 882b6951_9944_48cc_8989_6ebd3d91956f|RF Transceiver (nRF24L01)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows the values from a buffer to be passed directly to a digital output pin based on a defined threshold.
 |-
-|width=30%|[[File:Component Icon 649f4bc2_1360_4629_82aa_62e2fc32d4e4.png|Image]] [[Component: ID 649f4bc2_1360_4629_82aa_62e2fc32d4e4|Output PWM]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 74423151_1bf4_48b8_8ba8_a70c170ef2de|RFID (EB052, RWD-MICODE)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows the values from a buffer to be passed directly to an internal PWM output.
 |-
-|width=30%|[[File:Component Icon e6dd1315_4acf_4fb5_abd9_5743d3715cbe.png|Image]] [[Component: ID e6dd1315_4acf_4fb5_abd9_5743d3715cbe|PID Control]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3f8d29a6_40a6_4d5e_a254_190c86d9ebb7|RFID (MFRC522)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Control algorythm based on Proportional, Integral and Differential error.P/PI/PID - Mathematical control process to get to the setpoint as fast as possible, similar to the process in the human brain when steering a car.Used to accurately control things like motors, temperatures etc.
 |-
-|width=30%|[[File:Component Icon 939a5d54_28c7_488d_af39_46f7c5d2c429.png|Image]] [[Component: ID 939a5d54_28c7_488d_af39_46f7c5d2c429|Rectifier]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 055a7ab6_78df_47ca_b967_143485c4d706|RFID (Sparkfun Quiic / ID-12LA)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Converts the negative elements of a signal into a mirrored positive signal.
 |-
-|width=30%|[[File:Component Icon f1af5256_1dee_491c_b43f_fdc8f33279fb.png|Image]] [[Component: ID f1af5256_1dee_491c_b43f_fdc8f33279fb|Scale]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID cd5898bf_3a23_455e_b4e0_cddc1eec1d62|SRF (WirelessThings)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows the values in a single buffer to be scaled uniformly.Functions include: Multiply, Divide, LeftShift, RightShift, Float Multiply, Float Divide
 |-
-|width=30%|[[File:Component Icon 907f24e9_a8a3_46ea_942d_67dc55f7eb44.png|Image]] [[Component: ID 907f24e9_a8a3_46ea_942d_67dc55f7eb44|Simulated Control Load]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 53548cbe_cd57_471c_8ac1_3205d0e9da38|Zigbee (EB051, XBEE)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows a simulated load to be connected to the DSP network allowing you to model external factors such asMotor Speed, Motor Position, Temperature, Humidity, Pressure, Flow etc.Useful when used with a feedback based control system.
 |-
-|width=30%|[[File:Component Icon cbe42abc_5955_44da_a6d0_03e7cbcdcaca.png|Image]] [[Component: ID cbe42abc_5955_44da_a6d0_03e7cbcdcaca|Waveform Generator]]
-| A waveform generator component designed to plug into the DSP system component and allow several discreet waveforms to be generated.Functions available include: Sine, Square, Pulse, Triangle, Sawtooth, Noise, Custom
 |}
-==Storage==
+</tab>
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 1911d96c_78dd_414a_b23c_6691fb19f63f.png|Image]] [[Component: ID 1911d96c_78dd_414a_b23c_6691fb19f63f|Auto Version Identifier]]
+<tab name="Hardware">
-| Basic component designed to provide the program with the date and time of the build.Embedded assigns the time and date of compilation.Simulation assigns the time and date of the start of simulation.
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | E-blocks 2
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID cb3aa82e_81d7_491d_bab1_3fb7ee39c6af|Actuators]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 5f9d5a58_6c01_4588_afa0_df4c01ce161a|Bluetooth]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID af9061e8_7f2b_475e_844f_66ab76823d07|CAN_Bus_BL0140]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 25db03ef_5393_4fb8_9b34_87a506428296|Colour GLCD (BL0157)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d4c04ac8_bbcd_4981_8ce6_9d6c9bb1e26a|Combo]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 7ae74a71_a424_452f_8d71_618cf50cff98|E-block 2 Helper]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4d50e925_93e7_43ff_9c9f_8e958b9d714c|GLCD Monochrome]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e735f6a0_13c3_4ca3_9084_bdd19e21b8f8|GSM (BL0131)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e565ab5d_bf80_4911_938a_75b226ca6f93|IO Expander]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b904b771_a7bc_47ec_a1ea_9d4c77afccf2|Keypad (BL0138)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ee697d50_7fb5_4074_8cd6_996e5c386722|LCD]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 103aab27_2ea3_483c_9710_fc3c495288a7|LED]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c2cb94bb_4cba_40ba_bd8a_1134bbd3e081|Micro SD Card]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 05b6159b_1572_4c0d_8ddf_705d9741955a|RFID (BL0197)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 5ed3d626_7e86_4df8_881a_c326a2b932ec|Relay (BL0183)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 9202a62e_0a42_4780_adce_16b701e5ec53|Servo Motor Controller]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3bb0eba4_8ae3_442b_8653_507d1bde8be0|Sound Sensor (Grove 101020023)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b3a7287a_4070_49d1_9122_bf6169f67cd1|Switch]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID fcb6b4c9_7010_4058_aee8_6211ffbf3e26|SysBlocks]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 7ea86aa3_ef65_4e41_80ea_ed33c0e1baa6|TCP/IP]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ea9c0946_5f88_4f9a_ae5f_8ba9b981b389|WIFI]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon a78483e1_b293_47e7_984c_55984fc93571.png|Image]] [[Component: ID a78483e1_b293_47e7_984c_55984fc93571|Base 64]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0326308c_6e94_4bd7_bb0c_d6e882d8bbfc|Zigbee]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Component to allow base 64 encoding and decoding.Sometimes when communicating raw binary data it is useful to perform base 64 encoding to ensure that noneof your data bytes trigger any escape codes or other special case conditions. Base64 converts your binary datainto readable data using standard ASCII characters so you can be fairly certain that the data you send is the same as the data that is received.
 |-
-|width=30%|[[File:Component Icon 201d99f7_acf8_481d_a703_61860c2ba3ea.png|Image]] [[Component: ID 201d99f7_acf8_481d_a703_61860c2ba3ea|Circular Buffer (16_bit)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | E-blocks 2 Sensors
-| Circular buffer component allowing easy and efficient first in first out (FIFO) style data storage.Also features macros to allow you to check for specific 16-bit values.
 |-
-|width=30%|[[File:Component Icon c34f9b8a_a915_4f75_ad0c_87f2ad670a8a.png|Image]] [[Component: ID c34f9b8a_a915_4f75_ad0c_87f2ad670a8a|Circular Buffer (8_bit)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 940ad7e9_abab_434f_a5e3_ff50e2fdf962|Accel / Gyro 6-Axis (Grove 105020012)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Circular buffer component allowing easy and efficient first in first out (FIFO) style data byte storage.Useful when used with a comms component to capture data as it comes in ready for processing when we have time.Also features macros to allow you to check for specific incoming responses such as "OK" or "ERROR".
 |-
-|width=30%|[[File:Component Icon ed491c82_9f85_4627_93ce_d2b588352539.png|Image]] [[Component: ID ed491c82_9f85_4627_93ce_d2b588352539|Circular Buffer (Float)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b52758bf_4466_48c0_8054_33ee4b11e82b|Barometer (BMP280 / Grove 101020192)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Circular buffer component allowing easy and efficient first in first out (FIFO) style data storage.Also features macros to allow you to check for specific floating point values.
 |-
-|width=30%|[[File:Component Icon dcbf571f_a6fa_402d_bdd4_be00cca4070f.png|Image]] [[Component: ID dcbf571f_a6fa_402d_bdd4_be00cca4070f|EEPROM]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID a1ea988c_88c9_4f96_ac26_1684e918a3de|Colour Sensor (Grove 101020341)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| A means of reading data from and writing data to the EEPROM memory onboard the microcontroller.Fully functional with simulation but the target microcontroller must have EEPROM memory available to allow compilation to work.
 |-
-|width=30%|[[File:Component Icon 42f3f8ef_ff5b_44e6_9be8_8c43d9ab5b08.png|Image]] [[Component: ID 42f3f8ef_ff5b_44e6_9be8_8c43d9ab5b08|Embed File]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID f3b8eed1_fef6_4c1b_b62d_8efc84b1be35|Infrared Reflective Sensor (Grove 101020174)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| A component to simplify the process of embedding files into ROM.Stores the file inside a ROM look up table.
 |-
-|width=30%|[[File:Component Icon 9cb6d9da_5555_4e1c_a65c_93b299b6011c.png|Image]] [[Component: ID 9cb6d9da_5555_4e1c_a65c_93b299b6011c|File (SCADA)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ccbd6829_44c8_4011_954b_c39dd93adbed|PIR Motion (Grove 101020020)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| File component allowing access to read and write files on the local Windows file system.Only available in simulation runtime mode, cannot be downloaded to hardware.Compatible with File (SD Card) embedded component.
 |-
-|width=30%|[[File:Component Icon 0b61bd39_05a3_46ee_a2a5_da7bffb583c5.png|Image]] [[Component: ID 0b61bd39_05a3_46ee_a2a5_da7bffb583c5|File (SDSDHC Card)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID eca89720_1386_4589_ab75_6c0425162b91|Temp / Humidity (Grove 101020212)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| File component allowing access to read and write files on a SD/SDHC card.Also compatible with micro SD/SDHC cards, please note the pin layout is subtely different for these.The component automatically detects the filesystem on the card on initialise so FAT16 and FAT32 are fully supported.When used in simulation provides read/write access to files on the local windows file system.
 |-
-|width=30%|[[File:Component Icon 06829bc6_9e27_4353_9d95_3ba9dabc3384.png|Image]] [[Component: ID 06829bc6_9e27_4353_9d95_3ba9dabc3384|Flash EEPROM]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 06c52475_f44f_41f3_aae7_9ddeee44fc06|Ultrasonic Ranger (Grove 101020010)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Provides an emulated version of EEPROM using the microcontrollers on-board flash program memory.Requires a microcontroller with write and erase access to the flash memory.
 |-
-|width=30%|[[File:Component Icon dfb4d07a_3d70_45d5_83ef_07e3c95d86ab.png|Image]] [[Component: ID dfb4d07a_3d70_45d5_83ef_07e3c95d86ab|Lookup tables]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4b57ccb5_9e55_4d0e_8961_43f6fcaec2d7|Water Sensor (Grove 101020018)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A lookup-table component allowing an easy way to place arrays of static data into ROM memory.The LUT data is accessed directly allowing very low overhead when collecting the data.
 |-
-|width=30%|[[File:Component Icon b3061d15_325b_4a8f_863a_a059fab79caf.png|Image]] [[Component: ID b3061d15_325b_4a8f_863a_a059fab79caf|Median 16_bit]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Raspberry Pi Hat
-| Component to calulate the median from a set of sample data. Provides the signal whilst removing any spikes caused by noise or other intermittent data.
 |-
-|width=30%|[[File:Component Icon f2e05e6d_1864_465b_8d1d_0fc9238a7535.png|Image]] [[Component: ID f2e05e6d_1864_465b_8d1d_0fc9238a7535|Median 32_bit]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 165242cb_b40c_416e_a435_1fe7e724c5b8|Sense Hat]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| Component to calulate the median from a set of sample data. Provides the signal whilst removing any spikes caused by noise or other intermittent data.
 |-
-|width=30%|[[File:Component Icon c211fc8f_6f17_461f_a44b_01dbc2368fbe.png|Image]] [[Component: ID c211fc8f_6f17_461f_a44b_01dbc2368fbe|Median Float]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Misc Circuit
-| Component to calulate the median from a set of sample data. Provides the signal whilst removing any spikes caused by noise or other intermittent data.
 |-
-|width=30%|[[File:Component Icon ec64c307_3099_485b_bd55_052a5da95128.png|Image]] [[Component: ID ec64c307_3099_485b_bd55_052a5da95128|PIC32 Core Timer]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID b5665f5d_809d_4bd8_a79b_411f893bec16|GameCode]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| Allows for easy and accurate timings using the built in Core timer on the PIC32 devices.
 |-
-|width=30%|[[File:Component Icon f0e01201_8951_4748_87c3_d1f8423bb6e4.png|Image]] [[Component: ID f0e01201_8951_4748_87c3_d1f8423bb6e4|Real Time Clock (Internal, DS1307, DS3231, DS3232)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID b4f41fb0_9335_4a8f_a41d_284a8cfc31b5|LED Cube]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| A Real Time Clock component allowing things like clocks and timers to easily be created.Compatible with the internal RTCC module and external DS1307, DS3231 or DS3232 RTC ICs.
 |-
-|width=30%|[[File:Component Icon c48dfdeb_1177_4381_86dd_d7a98fefeb7a.png|Image]] [[Component: ID c48dfdeb_1177_4381_86dd_d7a98fefeb7a|Real Time Clock (MCP7940N)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 144a220f_7bc3_4b73_bc56_f9c7203bf204|RGB Xmas Tree]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| Serial (I2C) Real Time Clock component for MCP7940N device.When used with a MIAC project this component gives access to the internal RTC (if fitted, depending upon model) and the component properties will be automatically configured.
 |-
-|width=30%|[[File:Component Icon fdb712e0_3861_4e64_9c68_67eade64b089.png|Image]] [[Component: ID fdb712e0_3861_4e64_9c68_67eade64b089|Serial EEPROM (24C16)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Robotics
-| Serial (I2C) EEPROM component for 24C01 to 24C16
 |-
-|width=30%|[[File:Component Icon 35934f36_5cda_49e7_b1a0_05c85722d858.png|Image]] [[Component: ID 35934f36_5cda_49e7_b1a0_05c85722d858|Serial EEPROM (24C32)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID e3be641a_8808_4138_bee5_805fbbce468c|Formula AllCode]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| Serial (I2C) EEPROM component for 24C32 Can be added to a MIAC project to give read and write access to the internal non-volatile memory device (if fitted, depending upon model).
 |-
-|width=30%|[[File:Component Icon c8b6350e_b89a_4ad0_8669_e9387e24599e.png|Image]] [[Component: ID c8b6350e_b89a_4ad0_8669_e9387e24599e|Serial Flash (W25) (W25)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 9d5300ab_57ae_4483_8f18_04ec2007b406|Formula Flowcode]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| Component to allow support for the Winbond W25 range of SPI Flash devices.Compatible with various sizes of Flash including: 2Mb, 4Mb, 8Mb, 32Mb, 64Mb, 128Mb.
 |-
-|width=30%|[[File:Component Icon a8abdc98_224c_4c8a_8311_2921cb3dbe46.png|Image]] [[Component: ID a8abdc98_224c_4c8a_8311_2921cb3dbe46|String Initialiser]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | MIAC Module
-| A component allowing an easy way to initialise string variables using ROM memory.A simple and efficient way to populate string variables helping to save on RAM usage.Allows up to 16 strings to be stored. For additional strings simply use more String Initialiser components.
 |-
-|width=30%|[[File:Component Icon 306b3759_a92f_4779_b15f_93a9e35a75bf.png|Image]] [[Component: ID 306b3759_a92f_4779_b15f_93a9e35a75bf|String Translator]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 463bfc0e_2a04_414c_bf85_10718fa2ca08|MIAC (Arduino-Compatible)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| A simple component to allow multiple language support by substituting different strings dependingon the selected language.
 |-
-|width=30%|[[File:Component Icon 24ad2718_c70b_4088_aeda_3949dfdba740.png|Image]] [[Component: ID 24ad2718_c70b_4088_aeda_3949dfdba740|Timer]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 596e6f4d_d87a_4e8b_b108_c0501127c382|MIAC (dsPIC)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| Allows you to measure the passage of time via the use of a hardware timer peripheral.Works like a stopwatch with macros to start, stop and reset the timer counter.Returns time as integer Seconds, Milliseconds, Microseconds and also Floating Point and String.
 |-
-|width=30%|[[File:Component Icon 6508c7be_063a_4f9f_bae5_4a41cf977a86.png|Image]] [[Component: ID 6508c7be_063a_4f9f_bae5_4a41cf977a86|Type Conversions]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f9109442_8b0f_47d6_b563_d085588af222|MIAC NXT / ECU]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Component to simplify the task of converting data into different bit type variables.Allows conversion between Bytes, Ints, Longs and Floats.Useful when you need to store Ints, Longs and Floats into Byte based memory.Uses a simple 32-bit C Union to overlay the following variable types into the same RAM space.Byte[4], Int[2], Long, Float
 |-
-|width=30%|[[File:Component Icon eaee384d_6b16_4988_b1aa_8628231a7128.png|Image]] [[Component: ID eaee384d_6b16_4988_b1aa_8628231a7128|WAV Library File]]
-| Allows WAV files to be played or recorded using a file component to provide the data.Complete with buffer to allow for uninterrupted playback when performing other tasks.Playback compatible with analogue outputs such as DAC or PWM.Recording compatible with analogue inputs such as a Microphone.
 |}
-==Comms==
+</tab>
-===Comms: Interface===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon da332928_6342_4c2c_afc7_eaf33917d33e.png|Image]] [[Component: ID da332928_6342_4c2c_afc7_eaf33917d33e|CAN (Internal, MCP2515)]]
+<tab name="API">
-| Low level routines for controling the CAN interface either using an external MCP2515 IC and a SPI bus connectionor using an internal CAN peripheral if available on your device. Both methods will require a CAN driver IC like the MCP2551 to drive the CAN signals on the bus.
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | API Slave Devices
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c7edc169_d417_46ec_ad9b_983ee0326e29|API (Arduino Mega)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 2b53c2f2_b5d4_4e36_a647_6f9238744a75|API (Arduino Uno)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 556754b4_bed5_4bcd_88dd_fb13f92020d6|API (BL0032)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c9197106_edf6_4dcc_9654_ea56ad26f370|API (ECIO28P)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 40d5f2e2_3fb5_479a_91e1_f8ec3aae9e3a|API (ECIO40P)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e52b2356_d8b7_458b_8583_71f208bfd572|API (ESP32)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ed171d42_05fd_4946_9bf1_e59a9c98c5b8|API (Interface Board)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ec492589_4787_4b79_96df_718f9a2b46f1|API (RPI)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Test Injectors
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 927d2882_ab2f_43e9_8690_d1d6891001ee|Injector (API Analog Input)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID dbc62603_09e5_4a5e_8df3_22b921d9e9e9|Injector (API Digital Input)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 24219805_113d_4b12_b6bd_e1b0b0c33981.png|Image]] [[Component: ID 24219805_113d_4b12_b6bd_e1b0b0c33981|I2C Master]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 916e4f8c_ea50_4d16_bcbb_60492d600217|Injector (API Digital Output)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Generic Two Wire I2C Communications Interface
 |-
-|width=30%|[[File:Component Icon eac43fda_0bc5_4b08_881c_6d3e364f2eff.png|Image]] [[Component: ID eac43fda_0bc5_4b08_881c_6d3e364f2eff|I2C Slave]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 5a237757_52e5_414b_b6e4_79c7b784c3ba|Injector (AT)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Generic Two Wire I2C Communications Interface
 |-
-|width=30%|[[File:Component Icon 64b26b13_68cf_4a92_8616_e882b7c71023.png|Image]] [[Component: ID 64b26b13_68cf_4a92_8616_e882b7c71023|One Wire]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 002be1ac_efff_4c07_95de_1eab087cb25e|Injector (COM)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Low level routines for controlling or interacting with a standard one wire interface.
 |-
-|width=30%|[[File:Component Icon 96862c4d_debc_45fa_9433_74711a4b9a3b.png|Image]] [[Component: ID 96862c4d_debc_45fa_9433_74711a4b9a3b|SPI Master]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 50738af3_82a5_4074_a9b8_9f8f80be2b87|Injector (File)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Low level routines for controlling or interacting with an SPI interface.SPI or Serial Peripheral Interface is a bus used for board level communications between devices.A target microcontroller will usually have at least one hardware SPI peripheral built in.If the hardware SPI pins are in use or more SPI channels are required then there is also a software mode available.
 |-
-|width=30%|[[File:Component Icon e2955f6c_d724_4ab0_afca_d62093a77248.png|Image]] [[Component: ID e2955f6c_d724_4ab0_afca_d62093a77248|SPI Slave]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b81ab4d7_be8f_4ddd_b5dc_937bda03dc82|Injector (Flowcode vNet)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Low level routines for controlling or interacting with an SPI interface.SPI or Serial Peripheral Interface is a bus used for board level communications between devices.A target microcontroller will usually have at least one hardware SPI peripheral built in.
 |-
-|width=30%|[[File:Component Icon c73616d1_7ad0_45d9_aada_69ccfa4c5efc.png|Image]] [[Component: ID c73616d1_7ad0_45d9_aada_69ccfa4c5efc|UART (RS232)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 2ed54982_ef92_4509_a67c_7b3a72f91279|Injector (Human Interface)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Low level routines for controlling or interacting with a standard asyncronous serial interface.On a microcontroller the interface will be the onboard UART which will need voltage level shifting using a max2323 to become RS232 compatible.See the EB015 RS232 E-block for details.
 |-
-|width=30%|[[File:Component Icon 743ea495_34e7_47ee_bd79_3bfdc067b01c.png|Image]] [[Component: ID 743ea495_34e7_47ee_bd79_3bfdc067b01c|UART Software (Timer)]]
-| Creates a reliable software UART that can be driven using a timer interrupt setup by the user.The timer interrupt must be interrupting at the required baud rate. e.g 9600Hz.
 |}
-===Comms: IoT / Cloud===
+</tab>
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 72cd9559_26f7_4ffd_984c_cf3a82a6db16.png|Image]] [[Component: ID 72cd9559_26f7_4ffd_984c_cf3a82a6db16|BBC News]]
+<tab name="System">
-| Easily allows you to collect the news headlines and stories from the BBC RSS feed.
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Scenarios
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 62b6ca37_eb0a_4b5f_b2e1_9a732c4e05ce|3D Printer]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID a05022fd_6fa1_499d_b885_a7d983e7bfdf|Airplane Landing Gear]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 93252f96_a8e5_4d65_8c40_11614bb15b52|CNC Machine]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID fde30de0_35ed_40ca_937a_88da6409c1d2|Car Seat]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 264eadac_6fe5_43e0_bfb6_969175aaab93|Daytona Racetrack]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID fc012d2f_082a_4f6f_a61b_314c46477eb2|Maze Generator]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 6d87ff3b_ffd8_4720_92cc_363be1e8be6e|Oven Simulation]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID c46023c5_27e5_4122_bf3e_4519f23cfa0c|Pedestrian Crossing]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
 |-
-|width=30%|[[File:Component Icon df96ffa1_4d36_453a_8877_758f68a2676c.png|Image]] [[Component: ID df96ffa1_4d36_453a_8877_758f68a2676c|BBC Weather Forecast]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID fd273e86_49bd_4ee5_8f36_9562cd3645af|Pedestrian Crossing]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Easily allows you to collect three day forecasted weather metrics for your area using the BBC Weather data service.Supports Min/Max temperature, Wind Direction, Wind Speed, Visibility, Pressure, Humidty, UV Risk, Pollution and Sun Rise/Set times for your selected area.
 |-
-|width=30%|[[File:Component Icon bf90426c_1763_4a7a_be5c_b3e442e3f6d8.png|Image]] [[Component: ID bf90426c_1763_4a7a_be5c_b3e442e3f6d8|BBC Weather Observation]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d7160810_b896_4568_ac21_18897236a80e|Traffic Light]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Easily allows you to collect observed weather metrics for your area using the BBC Weather data service.Supports temperature and humidty for your selected area.Also available are Wind Direction, Wind Speed and Air Pressure but please note these are not always available depending on your selected area.
 |-
-|width=30%|[[File:Component Icon 947089aa_ca9f_4e6f_9f86_7d49a1ae6f86.png|Image]] [[Component: ID 947089aa_ca9f_4e6f_9f86_7d49a1ae6f86|EtherCAT Slave (EasyCAT)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 0c6b22fc_6e81_4406_aabd_5feb928e6aee|Traffic Light 1-Way]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| Provides support for the EtherCAT Slave industrial protocol using an EasyCAT Arduino shield.The shield can be driven from a Flowcode compatible Arduino type board or can be drivenusing an Arduino using the SCADA Slave firmware to drive EtherCAT from the Flowcodesimulation runtime. Compatible with the EasyCAT Easy Configurator tool.
 |-
-|width=30%|[[File:Component Icon 2740a93b_32a9_48d1_8fc3_089d13b50bb5.png|Image]] [[Component: ID 2740a93b_32a9_48d1_8fc3_089d13b50bb5|IoT Made Easy]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID dbf602c1_cb49_4149_bcd3_4a5afeae9a7a|Traffic Light 2-Way]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| A component designed to simplify MQTT comms allowing for multiple data streams to be dealt within a simple manner. Deals with translating values to and from the broker from topic strings into message IDs and numeric values. Works with lots of different MQTT brokers.
 |-
-|width=30%|[[File:Component Icon 459c9cfb_82e3_40ad_9456_54fc40ba5e6c.png|Image]] [[Component: ID 459c9cfb_82e3_40ad_9456_54fc40ba5e6c|MQTT Client]]
-| A component providing access to MQTT IoT client.The client can connect to a MQTT server such as ThingSpeak.Allowing IoT type data to be published and read back.
 |}
-===Comms: Networking===
+</tab>
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 91049bf5_2436_42dc_947a_c30c86463d98.png|Image]] [[Component: ID 91049bf5_2436_42dc_947a_c30c86463d98|Network Communications]]
+<tab name="Runtime">
-| A component designed to simplify the process of TCP/IP communications.Compatible with most of the Flowcode supported TCP/IP and WIFI components.A useful building block for creating components such as IoT and Modbus TCP.
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Matrix Tools
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e2ed1829_6967_4339_98e1_3806650297c5|Device Helper]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 54369d81_80ed_4d59_97bf_91f4b2cdf24c.png|Image]] [[Component: ID 54369d81_80ed_4d59_97bf_91f4b2cdf24c|TCP Template]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID fc3c670c_502a_418f_a123_649179752383|FCD helper]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Base TCP/IP component with simulation only interface to allow TCP/IP style network communications in simulation.Suitable for inheriting
 |-
-|width=30%|[[File:Component Icon 8aab4b54_a912_449c_b11a_7c1a5db8d591.png|Image]] [[Component: ID 8aab4b54_a912_449c_b11a_7c1a5db8d591|TCPIP (ENC28J60)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3e5cc6d0_3e36_46b8_bc40_f238a5735b6e|IntOsc Helper]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A set of routines used to control a ENC28J60 TCP/IP Module.Required connections VCC, Reset, GND, SCK, MISO, MOSI, CS.Leave these pins disconnected CLKOUT, ENC_WOL, ENC_INT
 |-
-|width=30%|[[File:Component Icon a1820de1_8cfe_4675_b185_a62ce44e2a6f.png|Image]] [[Component: ID a1820de1_8cfe_4675_b185_a62ce44e2a6f|TCPIP (NM7010A)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 5f7b77e5_e979_4010_93f1_e6d98f83bd71|Is Sim]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| TCP/IP component designed to work with the WIZ3100 range of modules from Wiznet.Also available in the form of the version 1 EB023 E-block which uses the NM7010A module.
 |-
-|width=30%|[[File:Component Icon 0341d84f_f7fd_473c_8076_b38b2d563e13.png|Image]] [[Component: ID 0341d84f_f7fd_473c_8076_b38b2d563e13|TCPIP (Raspberry Pi)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Indicators
-| TCP/IP sockets component for use with Raspberry Pi.Raspberry Pi Only
 |-
-|width=30%|[[File:Component Icon e18e39d3_2e05_4a15_b8aa_e8ada16cd3ef.png|Image]] [[Component: ID e18e39d3_2e05_4a15_b8aa_e8ada16cd3ef|TCPIP (W5500)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 995fa4f2_71ce_4d91_aa62_87f731ae7e7d|Circular Gauge]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| TCP/IP component designed to work with the W5500 device used on the ETH WIZ Click
 |-
-|width=30%|[[File:Component Icon d6db973b_a543_4743_91b5_176f9c6613df.png|Image]] [[Component: ID d6db973b_a543_4743_91b5_176f9c6613df|TCPIP (WIZ810MJ W5100)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 940e39a6_d035_4e43_8dbb_455ee4679066|Console Writer]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| TCP/IP component designed to work with the WIZ810MJ module or W5100 IC from Wiznet,as used on version 2 EB023 E-block and the MIAC Industrial Addon module.
 |-
-|width=30%|[[File:Component Icon 0dde7075_368e_404c_9d88_d9c6bec55172.png|Image]] [[Component: ID 0dde7075_368e_404c_9d88_d9c6bec55172|WLAN (EB069, WIZ610wi)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 05e09581_b11d_46ae_b32d_c6414a6a922d|LinearGauge]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Wireless LAN component designed to work with the WIZ610wi module from Wiznet.Provides a very simple interface to allow webpages to be hosted from hardware or simulation.Also available in the form of the EB069 E-block.
 |-
-|width=30%|[[File:Component Icon 66990164_3c50_4960_916d_327737a7a093.png|Image]] [[Component: ID 66990164_3c50_4960_916d_327737a7a093|WLAN (ESP-12S)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 9f9ffa92_a20d_4ba8_94e1_04e45bdea154|Logo Indicator]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| Wireless LAN component designed to work with the ESP-12S module.Provides a very simple interface to allow webpages to be hosted from hardware or simulation.Also available in the form of the BL0136 WIFI E-block.
 |-
-|width=30%|[[File:Component Icon e1bb4679_58ef_40dc_8d09_306ada46f7bf.png|Image]] [[Component: ID e1bb4679_58ef_40dc_8d09_306ada46f7bf|WLAN (ESP8266)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 64f3c8ad_21a4_4e15_b9aa_c32a2edca893|Numeric Display]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| Wireless LAN component designed to work with the ESP8266 module.Provides a very simple interface to allow webpages to be hosted from hardware or simulation.Also available in the form of the EB069 E-block.
 |-
-|width=30%|[[File:Component Icon f0f54e46_0848_4930_9bb6_eff9a34ed229.png|Image]] [[Component: ID f0f54e46_0848_4930_9bb6_eff9a34ed229|WLAN ESP32 (ESP32)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4b055fcf_06dd_471b_8736_d2a089e0dbe5|On / Off Indicator]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Wireless LAN component designed to work with ESP32 modules
 |-
-|width=30%|[[File:Component Icon a1c9b843_a641_4b9c_b762_26995b8f9464.png|Image]] [[Component: ID a1c9b843_a641_4b9c_b762_26995b8f9464|Webserver (GENERIC _ ROM FAT)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4ae66a67_562d_4d77_8417_9cd652f4f103|Speech (RealSpeak)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Webserver component designed to work with Network Comms abstraction layer.Provides a very simple interface to allow webpages to be hosted from hardware or simulation.Webpages can be embedded into ROM or can be pulled directly from an SD card using the FAT component.
 |-
-|width=30%|[[File:Component Icon ff377ede_2c09_4a83_99a0_5e11c7ae16d9.png|Image]] [[Component: ID ff377ede_2c09_4a83_99a0_5e11c7ae16d9|Webserver (NM7010A) (NM7010A)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Controls
-| Webserver component designed to work with the NM7010A module from Wiznet,as used in the version 1 EB023 E-block.Provides a very simple interface to allow webpages to be hosted from hardware or simulation.
 |-
-|width=30%|[[File:Component Icon f77f2b22_6a7c_4ae6_9f5f_724660cc6c93.png|Image]] [[Component: ID f77f2b22_6a7c_4ae6_9f5f_724660cc6c93|Webserver (W5500)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a11aa47b_7c82_4dad_b62d_b1a263e2a4fe|Circular Knob]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Webserver component designed to work with the W5500 module from Wiznet, as use by the ETH WIZ Click Module.Provides a very simple interface to allow webpages to be hosted from hardware or simulation.
 |-
-|width=30%|[[File:Component Icon 9e68a715_edc2_4a98_be64_c0d02f700135.png|Image]] [[Component: ID 9e68a715_edc2_4a98_be64_c0d02f700135|Webserver (WIZ810MJ)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 29e63c23_636f_4f9a_b691_ba1a717e3503|Joystick]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| Webserver component designed to work with the WIZ810MJ module from Wiznet,as used in the version 2 EB023 E-block and MIAC System Industrial Addon.Provides a very simple interface to allow webpages to be hosted from hardware or simulation.
-|}
-===Comms: System===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 5aefac05_ee5e_4d51_9f31_05281900a97e.png|Image]] [[Component: ID 5aefac05_ee5e_4d51_9f31_05281900a97e|DALI Master]]
-| A serial based communications protocol designed for controlling lighting, specifically digitallycontrolled dimmable fluorescent ballasts. DALI requires the signals to be level shifted from VCC and GND to +9.5V - +25.5V and GND. The master component can addess up to 64 individual slaves & up to 16 groups.
 |-
-|width=30%|[[File:Component Icon c714f39e_c8fb_413f_afda_2d169e655134.png|Image]] [[Component: ID c714f39e_c8fb_413f_afda_2d169e655134|DALI Slave]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 22ca7f47_0b00_453a_a5ae_75f999cdee2d|Joystick 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A serial based communications protocol designed for controlling lighting, specifically digitallycontrolled dimmable fluorescent ballasts. DALI requires the signals to be level shifted from VCC and GND to +9.5V - +25.5V and GND using external circuitry.
 |-
-|width=30%|[[File:Component Icon b4e10f9e_4ea9_4fbc_a584_a4d7d4d8fba6.png|Image]] [[Component: ID b4e10f9e_4ea9_4fbc_a584_a4d7d4d8fba6|DMX_512 Master]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b6909b43_7bfb_433f_8fdb_3b7d457ea73d|LinearSlider]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A serial based communications protocol designed for controlling theatrical equipment suchas dimmers, fog machines and intelligent lights. DMX-512 Slave devices are daisy chained together with a final 180R terminating resistor at the end of the chail. DMX requires the signalto be level shifted from VCC and GND to +2.5V and -2.5V.
 |-
-|width=30%|[[File:Component Icon 1be0ac44_3521_402e_a8b7_1faf86c09560.png|Image]] [[Component: ID 1be0ac44_3521_402e_a8b7_1faf86c09560|DMX_512 Slave]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 53a15e07_4dcd_4dd6_96a9_d96164d63574|Number Pad]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A serial based communications protocol designed for controlling theatrical equipment suchas dimmers, fog machines and intelligent lights. DMX-512 Slave devices are daisy chained together with a final 180R terminating resistor at the end of the chail. DMX requires the signalto be level shifted from VCC and GND to +2.5V and -2.5V.
 |-
-|width=30%|[[File:Component Icon 76bb1b8c_43da_48d3_b53f_a9907f03a528.png|Image]] [[Component: ID 76bb1b8c_43da_48d3_b53f_a9907f03a528|IO Expander (MCP23017)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 73611f11_f97d_4e6e_88e6_2d59b39c0a4a|RadioButton]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Provides 16 digital input/output pins arranged into two 8-bit ports using a I2C bus connection.Up to eight expanders can be connected to the same I2C peripheral by means of three address pins.
 |-
-|width=30%|[[File:Component Icon 331daac0_653d_4f45_9822_6408a8258bda.png|Image]] [[Component: ID 331daac0_653d_4f45_9822_6408a8258bda|IO Expander (MCP23S17)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Charts
-| Provides 16 digital input/output pins arranged into two 8-bit ports using a SPI bus connection.Multiple expanders can be connected to the same SPI peripheral by means of individual chip select pins.
 |-
-|width=30%|[[File:Component Icon d43a1c1f_8ad6_4271_9f62_20e1bdf529f0.png|Image]] [[Component: ID d43a1c1f_8ad6_4271_9f62_20e1bdf529f0|IO Expander (PCF8574)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a907d905_5879_48f3_9add_369a2f4e164f|Area Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Provides 8 digital input/output pins arranged into an 8-bit port using a I2C bus connection.Up to eight expanders can be connected to the same I2C peripheral by means of three address pins.Supports the PCF8574 and PCF8574A devices allowing up to 16 expanders to be connected to the same I2C bus ( 8 x PCF8574 + 8 x PCF8574A ).
 |-
-|width=30%|[[File:Component Icon 4616b658_531f_4c5e_981a_4d9fc04f9a36.png|Image]] [[Component: ID 4616b658_531f_4c5e_981a_4d9fc04f9a36|IO Expander (PCF8575)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 60b296cd_5b02_4c9c_9239_cca36238f480|Bar Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Provides 16 digital input/output pins arranged into 8-bit ports using a I2C bus connection.Up to eight expanders can be connected to the same I2C peripheral by means of three address pins.Supports the PCF8575 device allowing up to 8 expanders to be connected to the same I2C bus.
 |-
-|width=30%|[[File:Component Icon a9b43242_9ccc_4f1c_b2d1_acdfbe420fc1.png|Image]] [[Component: ID a9b43242_9ccc_4f1c_b2d1_acdfbe420fc1|MIDI]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 5d52e8a2_f248_4318_a0ac_e7b9503237cf|Bubble Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Low level routines for controlling or interacting with a standard MIDI interface.
 |-
-|width=30%|[[File:Component Icon 43861adb_8a59_492d_8f9f_a08775800bc1.png|Image]] [[Component: ID 43861adb_8a59_492d_8f9f_a08775800bc1|MULTIUART (SPI2UART)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ba8897fe_8349_47b3_9072_e823e74131af|Column Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Uses a high speed SPI connection to enable up to four buffered external UARTs via the MULTIUART modules.
 |-
-|width=30%|[[File:Component Icon 47f6b39b_ead7_40f5_9931_8a79aa54014a.png|Image]] [[Component: ID 47f6b39b_ead7_40f5_9931_8a79aa54014a|Modbus Master]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3a68ebf7_1225_4b29_87da_a734c0720591|Line Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Modbus component for talking to Modbus compatible hardware via RS232 or RS485.
 |-
-|width=30%|[[File:Component Icon 97647329_1e06_46dc_ba11_9d721038294d.png|Image]] [[Component: ID 97647329_1e06_46dc_ba11_9d721038294d|Modbus Master (SCADA)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 77e27287_6ca9_44f7_a160_d338d87b68de|Pie Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Modbus component for talking to Modbus compatible hardware via RS232 or RS485.
 |-
-|width=30%|[[File:Component Icon 687f8ad4_59f2_4079_bb84_7713dcb57a13.png|Image]] [[Component: ID 687f8ad4_59f2_4079_bb84_7713dcb57a13|Modbus Slave]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 64f4811d_e83f_4e82_be8a_9e857f6ec6e6|Polar Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Modbus component for creating Modbus compatible slave hardware via RS232 or RS485.
 |-
-|width=30%|[[File:Component Icon a93b1f52_b96d_4a14_806e_63f73d2654b2.png|Image]] [[Component: ID a93b1f52_b96d_4a14_806e_63f73d2654b2|Modbus Slave (SCADA)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b49da131_faf9_4bd7_bcdf_323016e64ffd|Radar Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Modbus component for creating Modbus compatible slave hardware via RS232 or RS485.
 |-
-|width=30%|[[File:Component Icon 019e3dbb_2bfa_44a7_baf0_17b672d9b8f4.png|Image]] [[Component: ID 019e3dbb_2bfa_44a7_baf0_17b672d9b8f4|Modbus TCP Master]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 387b4d2c_fc0f_44c0_a2ad_5fa05ed7db82|Ternary Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Modbus component for talking to Modbus compatible hardware via Ethernet or WIFI.Ensure TCP/IP or WIFI component is initialised and connected to a network before calling the ModbusMasterTCP component macros.
 |-
-|width=30%|[[File:Component Icon 1ecb9b0a_53e7_45c9_ab6f_7a0d4a0c47e1.png|Image]] [[Component: ID 1ecb9b0a_53e7_45c9_ab6f_7a0d4a0c47e1|Modbus TCP Slave]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0187d13d_8822_4e75_ab22_474c7058ebe4|XY Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Modbus component for creating Modbus compatible slave hardware via Ethernet or WIFI.Ensure TCP/IP or WIFI component is initialised and connected to a network before calling the ModbusSlaveTCP component macros.
 |-
-|width=30%|[[File:Component Icon 6436a040_ccc8_46e5_82c1_68f8d87b16c5.png|Image]] [[Component: ID 6436a040_ccc8_46e5_82c1_68f8d87b16c5|Visi (4DSystems)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Runtime Tools
-| A way of interacting with the VISI interface designed by 4D systems.VISI firmware must be pre-loaded onto the SD card connected to the display to allow everything to work correctly.
-|}
-===Comms: USB===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 06a0a9b3_dd23_4592_a781_537a31b97c2a.png|Image]] [[Component: ID 06a0a9b3_dd23_4592_a781_537a31b97c2a|USB HID]]
-| Component to create and communicate using a standard HID type USB class.Compatible with simulation and USB enabled microcontroller devices PIC/dsPIC/AVR.Note that AVR is currently in Beta and may have problems with custom descriptors.
 |-
-|width=30%|[[File:Component Icon fdceef06_919a_405b_8d0b_6118cd0e104c.png|Image]] [[Component: ID fdceef06_919a_405b_8d0b_6118cd0e104c|USB MIDI]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID cbb3c28e_2d73_4442_ac52_23a3b45d9870|COM Port]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Component to create and communicate using a standard MIDI connection.Compatible with simulation and USB enabled microcontroller devices.Currently only compatible with the 16-bit PIC range of devices.
 |-
-|width=30%|[[File:Component Icon 3e28ac22_2855_410a_9660_0b0a4731e545.png|Image]] [[Component: ID 3e28ac22_2855_410a_9660_0b0a4731e545|USB Serial]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a1da060c_e74a_4e12_bb90_3ddb43265592|Console Debugger]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Component to create and communicate using a standard CDC type COM port.Compatible with simulation and USB enabled microcontroller devices PIC/dsPIC/AVR.
 |-
-|width=30%|[[File:Component Icon 26cbc2df_5ef0_47db_ab2f_c2425b14462f.png|Image]] [[Component: ID 26cbc2df_5ef0_47db_ab2f_c2425b14462f|USB Slave]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3bf29e52_ebb4_4528_8d19_b2860c8ab80c|Console User Input]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Component to create and communicate using a generic USB communications profile.Has the ability to allow the device to be a slave to the PC.Compatible with simulation and USB enabled microcontroller devices (PIC/dsPIC).
-|}
-===Wireless===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon cff93310_545b_4948_a8fa_12b119c5f7a7.png|Image]] [[Component: ID cff93310_545b_4948_a8fa_12b119c5f7a7|Bluetooth (EB024, Generic AT)]]
-| Low level routines for controlling a standard AT Bluetooth interface.Also available in the form of the EB024 Bluetooth E-block.
 |-
-|width=30%|[[File:Component Icon 8be2ce64_4860_468a_aa8a_eac443274da3.png|Image]] [[Component: ID 8be2ce64_4860_468a_aa8a_eac443274da3|Bluetooth (ESP32 SPP)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 33b1e2c6_5509_40bf_a464_167edcbcf571|Data Recorder Setup]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Bluetooth slave component designed to run on a ESP32 providing legacy SPP functionality.BT Legacy functionality must be switched on via the sdkconfig file.
 |-
-|width=30%|[[File:Component Icon a8dbe015_0985_4581_abd5_1cc44f576fab.png|Image]] [[Component: ID a8dbe015_0985_4581_abd5_1cc44f576fab|Bluetooth (HC05 HC06)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3022653d_9f9f_4981_b558_9ed8d265c931|Event Log]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Low level routines for controlling or interacting with a HC05 or HC06 Bluetooth module.Contains functions to allow the baud rate, bluetooth name and bluetooth key to be defined.
 |-
-|width=30%|[[File:Component Icon 0c7df3fc_a46f_4712_8cd3_77079978f4fc.png|Image]] [[Component: ID 0c7df3fc_a46f_4712_8cd3_77079978f4fc|Bluetooth (RN4677)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 6ed9452d_1ae7_4f70_991c_6d8085a2d923|Input Message Box]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Low level routines for controlling a Microchip RN4677 Bluetooth Module.Also available in the form of the BL0170 Bluetooth E-block.Uses an interrupt to receive characters from the UART and improve reliability, Must be used with a hardware UART channel.
 |-
-|width=30%|[[File:Component Icon 76b3eb5c_2d23_4c8d_bde8_505032bc886a.png|Image]] [[Component: ID 76b3eb5c_2d23_4c8d_bde8_505032bc886a|Bluetooth v2 (EB024, Generic AT)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID eb9025a7_acec_455c_9033_bd4dd2586e05|Keyboard]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Low level routines for controlling a standard AT Bluetooth interface.Also available in the form of the EB024 Bluetooth E-block.Uses an interrupt to receive characters from the UART and improve reliability, Must be used with a hardware channel.
 |-
-|width=30%|[[File:Component Icon 575a3a3f_09b8_46be_8069_c4d1894d7e7e.png|Image]] [[Component: ID 575a3a3f_09b8_46be_8069_c4d1894d7e7e|GPS (EB056, Generic NMEA)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d2a7fe23_7dd2_43ca_ad55_185eec92fdd8|Message Box]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Component designed to process incoming NMEA style GPS data and convert into meaningfulvalues such as longitude, lattitude, ground speed, UTC date and time.Also available in the form of the EB056 GPS E-block.
 |-
-|width=30%|[[File:Component Icon 0d02ccfd_4cda_42b8_91d8_5392f491f9af.png|Image]] [[Component: ID 0d02ccfd_4cda_42b8_91d8_5392f491f9af|GSM (EB066, Generic AT)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 82a800d4_8620_4386_8ba3_25af2768f24e|Mouse]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Low level routines for controlling a standard AT GSM / GPRS interfaceAlso available in the form of the EB066 GSM E-block.
 |-
-|width=30%|[[File:Component Icon 2bfc8781_9817_4e0c_89f3_28dac37e9a62.png|Image]] [[Component: ID 2bfc8781_9817_4e0c_89f3_28dac37e9a62|IrDA (EB012, MCP1250, MCP2120)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 06db27a4_c20a_4371_b05e_7cdb55556859|Panel Console Viewer]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Low level routines for controlling a standard IrDA interface.Also available in the form of the EB012 IrDA E-block.
 |-
-|width=30%|[[File:Component Icon ea261653_86e2_4c37_94f6_4151b318c6f5.png|Image]] [[Component: ID ea261653_86e2_4c37_94f6_4151b318c6f5|LoRa (LAMBDA, SX1272)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 819d0c05_aaa2_4431_84dc_d40f3eee1b54|Property Manager]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Component to drive the LAMBDA LoRa Transciever module from RF Solutions.Uses an SPI bus connection to the microcontroller.Uses the Semtech SX1272 Transciever IC.
 |-
-|width=30%|[[File:Component Icon 81e90a9f_1594_4b34_8aef_5dd671dddc30.png|Image]] [[Component: ID 81e90a9f_1594_4b34_8aef_5dd671dddc30|RC5 (EB060, Generic 36KHz)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b86179cb_b561_4be4_9d12_e51da4248807|Serial Monitor]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Low level routines for controlling a standard RC5 IR interface.Also available in the form of the EB060 RC5 E-block.
 |-
-|width=30%|[[File:Component Icon 882b6951_9944_48cc_8989_6ebd3d91956f.png|Image]] [[Component: ID 882b6951_9944_48cc_8989_6ebd3d91956f|RF 2.4GHz (nRF24L01)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b9cd8fbe_d082_4fe3_b1a0_d6f33f8af028|Simulation External Input]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simple RF communications module based on the 2.4GHz nRF24L01 modules.
 |-
-|width=30%|[[File:Component Icon 45bd9065_b6f7_42be_b96f_28c3df2c0a22.png|Image]] [[Component: ID 45bd9065_b6f7_42be_b96f_28c3df2c0a22|RF ISM (EB063, MRF49XA)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a96ddf9d_631d_4db7_a66e_c709e2de7164|Time Stamp]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simple RF-ISM communications module based on the Microchip Alpha MRF49XA device.Also available in the form of the EB063 RF E-block.
 |-
-|width=30%|[[File:Component Icon 74423151_1bf4_48b8_8ba8_a70c170ef2de.png|Image]] [[Component: ID 74423151_1bf4_48b8_8ba8_a70c170ef2de|RFID (EB052, RWD_MICODE)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f137a538_3ebf_42e7_a941_b8f628802070|Timed Event Trigger]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Low level routines for controlling a RF Solutions RFID interfaceAllows communications between Mifare, ICode and HiTag type RFID tags.Also available in the form of the EB052 RFID E-block.
 |-
-|width=30%|[[File:Component Icon 3f8d29a6_40a6_4d5e_a254_190c86d9ebb7.png|Image]] [[Component: ID 3f8d29a6_40a6_4d5e_a254_190c86d9ebb7|RFID (MFRC522)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 51ad4fb4_3b45_4cd0_a74c_87311de8d3a2|Tone Generator]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Functions designed to work with the MFRC522 contactless reader IC.The MFRC522 supports all variants of the MIFARE Mini, MIFARE 1K, MIFARE 4K, MIFARE Ultralight, MIFARE DESFire EV1 and MIFARE Plus RF identification protocols.
 |-
-|width=30%|[[File:Component Icon cd5898bf_3a23_455e_b4e0_cddc1eec1d62.png|Image]] [[Component: ID cd5898bf_3a23_455e_b4e0_cddc1eec1d62|SRF (WirelessThings) (SRF)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f54fa744_5af4_4c08_bdb9_fb31848a2b63|XML JSON Parser]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| The SRF is designed for wireless transmission and reception of serial data in an easy to use surface mounted module. It has an on-board balun and chip antenna, which can be detached for applications where an external antenna is required.
 |-
-|width=30%|[[File:Component Icon 53548cbe_cd57_471c_8ac1_3205d0e9da38.png|Image]] [[Component: ID 53548cbe_cd57_471c_8ac1_3205d0e9da38|Zigbee (EB051, XBEE) (XBEE)]]
-| Zigbee component designed to work with the XBEE range of modules from Digi.Provides a very simple interface to allow Zigbee mesh networks and communications.Also available in the form of the EB051 Zigbee E-block. Can also be used with Zigbee MIAC Addon module
 |}
-==Hardware==
+</tab>
-===E-blocks 1===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon b81925b1_7504_4d77_ac90_3a4fa700fcc4.png|Image]] [[Component: ID b81925b1_7504_4d77_ac90_3a4fa700fcc4|Accelerometer (EB068)]]
+<tab name="Creation">
-| LIS3LV02DQ Accelerometer sensor with options for I2C or SPI communications.Useful for approximating Pitch and Roll or for detecting acceleration.Also available in the form of the EB068 Accelerometer E-block.
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Primitives (2d)
 |-
-|width=30%|[[File:Component Icon 9a7d4e50_8d7e_4c5e_9a93_7948ab47edad.png|Image]] [[Component: ID 9a7d4e50_8d7e_4c5e_9a93_7948ab47edad|Combo Board (EB083)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiBaseChart|Base Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simulated version of the EB083 Combo board including LEDs, Switches, LCD, 7-Segs and analogue inputs.
 |-
-|width=30%|[[File:Component Icon 87d8bad5_6392_41fb_b370_d9b2c0f8f13f.png|Image]] [[Component: ID 87d8bad5_6392_41fb_b370_d9b2c0f8f13f|DSP Audio Input (EB085)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiButton|Button]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| 16-bit external ADC connected to the microcontroller using SPI.
 |-
-|width=30%|[[File:Component Icon e83923b3_994a_41c9_b277_5b107ab6e1dd.png|Image]] [[Component: ID e83923b3_994a_41c9_b277_5b107ab6e1dd|DSP Audio Output (EB086)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiCanvas|Canvas]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| 16-bit external DAC connected to the microcontroller using SPI.
 |-
-|width=30%|[[File:Component Icon a5320e5b_75c1_4e67_9ed4_e933f40efc9a.png|Image]] [[Component: ID a5320e5b_75c1_4e67_9ed4_e933f40efc9a|E_block Helper]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiComboBox|ComboBox]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A purely cosmetic component to help simplify E-block connections without having to keep referring to the datasheets.Specify which E-block your using and the component will give you options for the patch settings and display the connections required.
 |-
-|width=30%|[[File:Component Icon 15d02383_645d_4bbe_8732_a67162cdb90c.png|Image]] [[Component: ID 15d02383_645d_4bbe_8732_a67162cdb90c|GLCD (EB043 v1)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiComplexShape|Complex Shape]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the legacy version 1 EB043 E-blocks.
 |-
-|width=30%|[[File:Component Icon c3e842d5_cf5d_4e4e_a406_95067ba26693.png|Image]] [[Component: ID c3e842d5_cf5d_4e4e_a406_95067ba26693|GLCD (EB043 v2)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiConnection|Connection]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the legacy version 2 EB043 E-blocks.
 |-
-|width=30%|[[File:Component Icon c4badacf_868a_4744_ad5a_a74fea126d6b.png|Image]] [[Component: ID c4badacf_868a_4744_ad5a_a74fea126d6b|GLCD (EB057 / EB058)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiEditBox|EditBox]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the EB057 modules and EB058 E-blocks.
 |-
-|width=30%|[[File:Component Icon c7ba30ad_1d81_496e_b2ca_e4efb109521b.png|Image]] [[Component: ID c7ba30ad_1d81_496e_b2ca_e4efb109521b|GLCD (EB075)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiGauge|Gauge]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the Goldelox range of displays from 4D Systems.Also available in the form of the EB075 GLCD E-block.
 |-
-|width=30%|[[File:Component Icon cb40c3c2_03fd_4d66_9364_790e72714bcb.png|Image]] [[Component: ID cb40c3c2_03fd_4d66_9364_790e72714bcb|GLCD (EB076 v2)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiGrid|Grid]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the Picaso range of displays from 4D Systems.Also available in the form of the EB076 GLCD Touchscreen E-block.Component based around the uLCD-32PTU display.
 |-
-|width=30%|[[File:Component Icon c6586b24_9a1c_4e19_8051_8ae5923c418a.png|Image]] [[Component: ID c6586b24_9a1c_4e19_8051_8ae5923c418a|GLCD (EB076)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiImage|Image]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the Picaso range of displays from 4D Systems.Also available in the form of the EB076 GLCD Touchscreen E-block.Component based around the uLCD-32PT display.
 |-
-|width=30%|[[File:Component Icon e871d984_b0e0_4185_8d94_b11d28040996.png|Image]] [[Component: ID e871d984_b0e0_4185_8d94_b11d28040996|Keypad (EB014)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiLine|Line]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Preset keypad based around the 3 * 4 unit, as used by the Matrix EB014 E-block
 |-
-|width=30%|[[File:Component Icon d29dda88_17de_4008_991a_c881890d4c57.png|Image]] [[Component: ID d29dda88_17de_4008_991a_c881890d4c57|LCD (EB005)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiNumericIndicator|Numeric Indicator]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| LCD based on the unit used in the Matrix EB005 E-block
 |-
-|width=30%|[[File:Component Icon 82c2f7d0_c6ed_4c6e_8ab8_7958b490dc99.png|Image]] [[Component: ID 82c2f7d0_c6ed_4c6e_8ab8_7958b490dc99|LED  (EB004)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiShape|Shape]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| An LED matrix made up of standard PCB mount 5mm LEDs.
 |-
-|width=30%|[[File:Component Icon 4627d2fb_b41e_44cf_b125_e8511e5ebaa4.png|Image]] [[Component: ID 4627d2fb_b41e_44cf_b125_e8511e5ebaa4|SPI Master (EB013)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiSwitch|Switch]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Low level routines for controlling or interacting with an SPI interface.SPI or Serial Peripheral Interface is a bus used for board level communications between devices.A target microcontroller will usually have at least one hardware SPI peripheral built in.If the hardware SPI pins are in use or more SPI channels are required then there is also a software mode available.Has additional functions to work with the E-blocks EB013 SPI hardware.
 |-
-|width=30%|[[File:Component Icon 4772ea31_c5fb_4ac1_8aef_c9385a0e9a53.png|Image]] [[Component: ID 4772ea31_c5fb_4ac1_8aef_c9385a0e9a53|Switch (EB007)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiText|Text]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| An array of up to eight momentary push switches, each connected to a single pin of the specified port.
 |-
-|width=30%|[[File:Component Icon bb483909_20df_4e51_ac45_092ab4adf36a.png|Image]] [[Component: ID bb483909_20df_4e51_ac45_092ab4adf36a|TCPIP (EB023 v1)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Primitives (3d)
-| TCP/IP component designed to work with the WIZ3100 range of modules from Wiznet.Also available in the form of the version 1 EB023 E-block which uses the NM7010A module.
 |-
-|width=30%|[[File:Component Icon 35d02098_c871_49c0_b34d_a3f86d764886.png|Image]] [[Component: ID 35d02098_c871_49c0_b34d_a3f86d764886|TCPIP (EB023 v2)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID ec0b30b2_e817_4d34_b227_25ce8b4f46e5|3D Panel Measurement Tool]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| TCP/IP component designed to work with the WIZ810MJ module from Wiznet,as used on version 2 EB023 E-block and the MIAC Industrial Addon module.
 |-
-|width=30%|[[File:Component Icon cbb357fa_5252_415d_80f5_01e4ab85cb4a.png|Image]] [[Component: ID cbb357fa_5252_415d_80f5_01e4ab85cb4a|Touch Pads (EB088)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID component:text|Label]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| This board provides five touch areas for use with capacitive sensing. Hence five digital touch switches can be implemented. This component directly interfaces with the EB088 CapTouch E-block.
 |-
-|width=30%|[[File:Component Icon 4d985181_e4b1_4767_a068_fb31a6d68158.png|Image]] [[Component: ID 4d985181_e4b1_4767_a068_fb31a6d68158|WIFI (EB069 v2)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID component:shape|Shape]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| Wireless LAN component designed to work with the ESP8266 module.Provides a very simple interface to allow webpages to be hosted from hardware or simulation.Also available in the form of the EB069 E-block.
 |-
-|width=30%|[[File:Component Icon c0a18557_a477_4d5a_b9ca_e0724378d983.png|Image]] [[Component: ID c0a18557_a477_4d5a_b9ca_e0724378d983|Webserver (EB023 v1)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID component:textbox|Text box]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| Webserver component designed to work with the NM7010A module from Wiznet,as used in the version 1 EB023 E-block.Provides a very simple interface to allow webpages to be hosted from hardware or simulation.
 |-
-|width=30%|[[File:Component Icon ee1635e0_3008_4836_89e1_005435f4a33d.png|Image]] [[Component: ID ee1635e0_3008_4836_89e1_005435f4a33d|Webserver (EB023 v2)]]
-| Webserver component designed to work with the WIZ810MJ module from Wiznet,as used in the version 2 EB023 E-block and MIAC System Industrial Addon.Provides a very simple interface to allow webpages to be hosted from hardware or simulation.
 |}
-===E-blocks 2===
+</tab>
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 5f9d5a58_6c01_4588_afa0_df4c01ce161a.png|Image]] [[Component: ID 5f9d5a58_6c01_4588_afa0_df4c01ce161a|Bluetooth (BL0170)]]
+</tabs>
-| Low level routines for controlling a Microchip RN4677 Bluetooth Module.Also available in the form of the BL0170 Bluetooth E-block.Uses an interrupt to receive characters from the UART and improve reliability, Must be used with a hardware UART channel.
+==App Developer Components==
-|-
+<tabs>
-|width=30%|[[File:Component Icon 25db03ef_5393_4fb8_9b34_87a506428296.png|Image]] [[Component: ID 25db03ef_5393_4fb8_9b34_87a506428296|Colour GLCD (BL0157)]]
-| Graphical display component designed to work with the BL0157 E-block.Based on the ILI9163C 16-bit colour graphical controller IC.
+<tab name="Controls ">
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
 |-
-|width=30%|[[File:Component Icon d4c04ac8_bbcd_4981_8ce6_9d6c9bb1e26a.png|Image]] [[Component: ID d4c04ac8_bbcd_4981_8ce6_9d6c9bb1e26a|Combo (BL0114)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Digital Control
+|-
-| A component to drive the BL0114 Combo board including LEDs, Switches, LCD, 7-Segs and analogue inputs.
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID eb9025a7_acec_455c_9033_bd4dd2586e05|Keyboard]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 53a15e07_4dcd_4dd6_96a9_d96164d63574|Number Pad]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID fd273e86_49bd_4ee5_8f36_9562cd3645af|Pedestrian Crossing]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 73611f11_f97d_4e6e_88e6_2d59b39c0a4a|RadioButton]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID cd8da0fe_80cf_4532_bb50_69f0d1730e70|Switch Array (Push) 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 975b2770_cfa8_4c76_b8ca_c008735e366d|Switch Array (Slide) 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e2698f3e_1168_4f25_9c50_24a74ea7e34a|Switch Push Button]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 58b37280_d90e_4a23_941d_26f34ccff410|Switch Rotary 0 - 1]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 1df1ea9a_6983_4014_aba5_f5144ea4e053|Switch Slide]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d43ac17c_2ec0_4277_95f9_fbc339456fab|Switch User Images]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 7ae74a71_a424_452f_8d71_618cf50cff98.png|Image]] [[Component: ID 7ae74a71_a424_452f_8d71_618cf50cff98|E_block 2 Helper]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Analog Control
-| A purely cosmetic component to help simplify E-block 2 connections without having to keep referring to the datasheets.Specify which E-block 2 board your using and the component will display the connections required.
 |-
-|width=30%|[[File:Component Icon 4d50e925_93e7_43ff_9c9f_8e958b9d714c.png|Image]] [[Component: ID 4d50e925_93e7_43ff_9c9f_8e958b9d714c|GLCD Monochrome (BL0139)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a11aa47b_7c82_4dad_b62d_b1a263e2a4fe|Circular Knob]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the EB2 BL0139 Downstream E-block.
 |-
-|width=30%|[[File:Component Icon e565ab5d_bf80_4911_938a_75b226ca6f93.png|Image]] [[Component: ID e565ab5d_bf80_4911_938a_75b226ca6f93|IO Expander (BL0155)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 29e63c23_636f_4f9a_b691_ba1a717e3503|Joystick]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| Provides 16 digital input/output pins arranged into two 8-bit E-block 2 ports using a SPI bus connection.
 |-
-|width=30%|[[File:Component Icon b904b771_a7bc_47ec_a1ea_9d4c77afccf2.png|Image]] [[Component: ID b904b771_a7bc_47ec_a1ea_9d4c77afccf2|Keypad (BL0138)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 22ca7f47_0b00_453a_a5ae_75f999cdee2d|Joystick 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Keypad component to drive the E-blocks 2 BL0138 Keypad board.Provides twelve individual rasta scanned switches.
 |-
-|width=30%|[[File:Component Icon ee697d50_7fb5_4074_8cd6_996e5c386722.png|Image]] [[Component: ID ee697d50_7fb5_4074_8cd6_996e5c386722|LCD (BL0169)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b6909b43_7bfb_433f_8fdb_3b7d457ea73d|LinearSlider]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| LCD component to drive the E-blocks 2 BL0169 LCD board.Provides a 4 x 20 character alphanumeric display.
 |-
-|width=30%|[[File:Component Icon 103aab27_2ea3_483c_9710_fc3c495288a7.png|Image]] [[Component: ID 103aab27_2ea3_483c_9710_fc3c495288a7|LED (BL0167)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 82a800d4_8620_4386_8ba3_25af2768f24e|Mouse]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| LED component to drive the E-blocks 2 BL0167 LED board.Provides eight individually addressable LEDs.
 |-
-|width=30%|[[File:Component Icon 05b6159b_1572_4c0d_8ddf_705d9741955a.png|Image]] [[Component: ID 05b6159b_1572_4c0d_8ddf_705d9741955a|RFID (BL0197)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Dialogue Control
-| Low level routines for controlling a BL0197 RFID E-block 2 board.Complete with macros to control the tag type and buzzer parameters.
 |-
-|width=30%|[[File:Component Icon bc8ae960_3887_4d08_ac7c_1eedb8e5f6c8.png|Image]] [[Component: ID bc8ae960_3887_4d08_ac7c_1eedb8e5f6c8|Servo Motor (BL0162)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3bf29e52_ebb4_4528_8d19_b2860c8ab80c|Console User Input]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Servo motor component to drive the E-blocks 2 BL0162 Servo Motors board.Provides up to eight individually addressable connections for standard DC servo motors to be connected.
 |-
-|width=30%|[[File:Component Icon b3a7287a_4070_49d1_9122_bf6169f67cd1.png|Image]] [[Component: ID b3a7287a_4070_49d1_9122_bf6169f67cd1|Switch (BL0145)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 6ed9452d_1ae7_4f70_991c_6d8085a2d923|Input Message Box]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A set of 8 push switches that can be connected to an E-blocks 2 upstream board via a port connector.Switches are wired in an active high configuration.
 |-
-|width=30%|[[File:Component Icon ea9c0946_5f88_4f9a_ae5f_8ba9b981b389.png|Image]] [[Component: ID ea9c0946_5f88_4f9a_ae5f_8ba9b981b389|WIFI (BL0136)]]
-| Wireless LAN component designed to work with the ESP-12S module.Provides a very simple interface to allow webpages to be hosted from hardware or simulation.Also available in the form of the BL0136 WIFI E-block.
 |}
-===EBM Modules===
+</tab>
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon bdb9fcf6_3fb3_4051_8078_455b44cb249c.png|Image]] [[Component: ID bdb9fcf6_3fb3_4051_8078_455b44cb249c|Accel Mag 6_Axis (EBM015)]]
+<tab name="Indicators ">
-| EBM015 Combined 6-Axis Accelerometer and Magnetometer sensorsUseful for working out data such as Pitch and Yaw.
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Digital Indicator
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 6a9e9265_e261_4604_8dc3_252ea3ccf02c|7Segment (Single)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b07ae733_c144_4558_979a_be737044519c|LED Array]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 44f82374_a417_40d5_bd42_23a177a390d2|LED Mono]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ce086f9b_c365_4471_b6e4_1760a53a7bfb|LED Mono Custom]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b562ceda_0ae0_4c50_bbcd_38a4b7e77829|LED Mono User Images]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 9f9ffa92_a20d_4ba8_94e1_04e45bdea154|Logo Indicator]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
 |-
-|width=30%|[[File:Component Icon 749afd05_ce22_42cb_b17e_3f424cbca6b0.png|Image]] [[Component: ID 749afd05_ce22_42cb_b17e_3f424cbca6b0|Colour Sensor (EBM018)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 64f3c8ad_21a4_4e15_b9aa_c32a2edca893|Numeric Display]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| This board provides the ability to detect colours using the TCS3200 sensor. It will return RGB and W values, dependent on the colour of the object under test.
 |-
-|width=30%|[[File:Component Icon e3fdcca6_1408_4389_8e2d_e741b06b3463.png|Image]] [[Component: ID e3fdcca6_1408_4389_8e2d_e741b06b3463|Digital Temperature (EBM004)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4b055fcf_06dd_471b_8736_d2a089e0dbe5|On / Off Indicator]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A digital temperature sensor based around the LM75B chip.
 |-
-|width=30%|[[File:Component Icon 245b0876_a350_4546_bb71_b427ff6ec9ef.png|Image]] [[Component: ID 245b0876_a350_4546_bb71_b427ff6ec9ef|Dual Potentiometer _ Trimmer (EBM006)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0dcce561_806f_4ba7_ad54_fb07319fc69a|Simulation 7 Seg]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| This board provides two rotary potentiometers. This component directly interfaces with the EBM006 Dual Trimmers sensors board.
 |-
-|width=30%|[[File:Component Icon 5a6d2f2e_da92_49b4_ad5c_71f51e8fe24b.png|Image]] [[Component: ID 5a6d2f2e_da92_49b4_ad5c_71f51e8fe24b|GLCD (EBM001)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d7160810_b896_4568_ac21_18897236a80e|Traffic Light]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Graphical display component designed to work with the EBM001 modules and EB084 E-blocks.Based on the ILI9163C 16-bit colour graphical controller IC.
 |-
-|width=30%|[[File:Component Icon 7b1edf74_d0c8_4b1d_a8b3_54580ed79f64.png|Image]] [[Component: ID 7b1edf74_d0c8_4b1d_a8b3_54580ed79f64|Gyroscope (EBM009)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Analog Indicator
-| Interface to the L3G4200D three axis digital gyroscope.  Panel GUI can be used to simulateincoming data for testing.
 |-
-|width=30%|[[File:Component Icon b42786ab_fd9a_47cf_b3c4_560ecdc613fd.png|Image]] [[Component: ID b42786ab_fd9a_47cf_b3c4_560ecdc613fd|Hall Effect (EBM011)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 995fa4f2_71ce_4d91_aa62_87f731ae7e7d|Circular Gauge]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| The board has a Hall Effect sensor (SL353) that gives a digital output in the presence of a magnetic field (in the region of 60 Gauss) from a permanent magnet or electromagnet, either North or South pole.
 |-
-|width=30%|[[File:Component Icon 5cb8f1ac_bab2_4740_9a9d_01602a5fb196.png|Image]] [[Component: ID 5cb8f1ac_bab2_4740_9a9d_01602a5fb196|Humidity  (EBM016)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 05e09581_b11d_46ae_b32d_c6414a6a922d|LinearGauge]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Humidity and temperature sensor using an SHT21 IC connected via I2C - as used by theMatrix e-block module EBM016.On screen GUI allows temperature and humidity values to be simulated, and will show allI2C communication in a console window.
 |-
-|width=30%|[[File:Component Icon a6989ec5_8d9b_4c16_b06f_b55394465946.png|Image]] [[Component: ID a6989ec5_8d9b_4c16_b06f_b55394465946|Infrared (EBM020)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4ae66a67_562d_4d77_8417_9cd652f4f103|Speech (RealSpeak)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| The Infrared sensor board contains both an IR transmitter and receiver. The transmitter is enabled via a digital control signal and the receiver provides an analogue output. By enabling the transmitter and reading the variable voltage output of the receiver it is possible to measure the distance of a reflecting object in the region of 1cm to 10cm.
 |-
-|width=30%|[[File:Component Icon beb1f845_8f53_4214_9b14_11b7c2bf3ba8.png|Image]] [[Component: ID beb1f845_8f53_4214_9b14_11b7c2bf3ba8|PIR (EBM012)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Dialogue Indicator
-| This board provides a PIR sensor which is read as a digital input.
 |-
-|width=30%|[[File:Component Icon 9a0503ff_2954_445e_9032_3465a05f8f82.png|Image]] [[Component: ID 9a0503ff_2954_445e_9032_3465a05f8f82|Potentiometer (EBM002)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 940e39a6_d035_4e43_8dbb_455ee4679066|Console Writer]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| This board consists of a standard shaft rotary potentiometer that provides a linear voltage output ranging between the microcontroller power rails. This can be connected to an Analogue to Digital input of the microcontroller in order to provide a control value.
 |-
-|width=30%|[[File:Component Icon 0c8229b3_03ea_415c_824b_a5c9a8394751.png|Image]] [[Component: ID 0c8229b3_03ea_415c_824b_a5c9a8394751|Rotary Encoder (EBM007)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d2a7fe23_7dd2_43ca_ad55_185eec92fdd8|Message Box]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Provides a rotary encoder with dual digital outputs that provide rotation and direction information. When connected to two digital inputs of a microcontroller a “digital pot” can be implemented to convert to digital values.
 |-
-|width=30%|[[File:Component Icon 2f3dd5e3_b652_4045_9ab9_10d49440e5cd.png|Image]] [[Component: ID 2f3dd5e3_b652_4045_9ab9_10d49440e5cd|Thermistor (EBM003)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 06db27a4_c20a_4371_b05e_7cdb55556859|Panel Console Viewer]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A generic thermistor component that can be used to simulate and create code for anythermistor with a known temperature/resistance curve.  Thermistor is connected in a simplepotential divider circuit - thermistor between ADC input and 0V, and a fixed resistor betweenADC and the positive supply.  The component is also used with the EBM003 module, in whichcase the extra circuitry is already included.  Default calibration is for the EBM003 module.
 |-
-|width=30%|[[File:Component Icon d5c30cea_62de_4a55_9783_9bf9d104e3ec.png|Image]] [[Component: ID d5c30cea_62de_4a55_9783_9bf9d104e3ec|Thermocouple TypeK (EBM008)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Audio Indicator
-| A component matchin the Matrix EBM008 thermocouple board.  As well as an interface toa standard TypeK thermocouple, this also includes a thermistor that is used for cold junctioncompensation.
 |-
-|width=30%|[[File:Component Icon 8a853d8e_967b_4317_85d2_070167d41396.png|Image]] [[Component: ID 8a853d8e_967b_4317_85d2_070167d41396|Touch Pads (EBM013)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 51ad4fb4_3b45_4cd0_a74c_87311de8d3a2|Tone Generator]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| This board provides two touch areas for use with capacitive sensing. Hence two digital touch switches can be implemented. This component directly interfaces with the EBM013 Sensors board.
 |-
-|width=30%|[[File:Component Icon ef0c13ae_8a23_459c_947a_f0d2ad5f8bf1.png|Image]] [[Component: ID ef0c13ae_8a23_459c_947a_f0d2ad5f8bf1|Touch Slider (EBM014)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID eaee384d_6b16_4988_b1aa_8628231a7128|WAV Library File]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| This board provides two touch slide areas for use with capacitive sensing. Therefore,two digital touch slideers can be implemented. This component directly interfaces with the EBM014 Sensors board.
 |-
-|width=30%|[[File:Component Icon feb064a2_e087_45e1_a7f9_c9fa0edfdace.png|Image]] [[Component: ID feb064a2_e087_45e1_a7f9_c9fa0edfdace|Ultrasonic (EBM019)]]
-| This  board  has  both  an  ultrasonic  transmitter  and receiver. The transmitter is driven by an on-board 40KHz oscillator which is enabled by the host microprocessor. The receiving sensor signal is amplified and provided as an analogue signal to be processed by a single channel ADC of the microprocessor. By measuring the time delay between  enabling  a  transmit  pulse  and  receiving  an echo the distance of objects in a range of around 3cm to 3m can be determined.
 |}
-===MIAC Module===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 463bfc0e_2a04_414c_bf85_10718fa2ca08.png|Image]] [[Component: ID 463bfc0e_2a04_414c_bf85_10718fa2ca08|MIAC (Arduino_Compatible) (MIAC (Arduino-Compatible))]]
+</tab>
-| MIAC - Matrix Industrial Automotive Controller (Arduino-Compatible)
+<tab name="Charts ">
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
 |-
-|width=30%|[[File:Component Icon d69543a8_f38b_488a_b905_9fa2d5970beb.png|Image]] [[Component: ID d69543a8_f38b_488a_b905_9fa2d5970beb|MIAC (PIC)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a907d905_5879_48f3_9add_369a2f4e164f|Area Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| MIAC - Matrix Industrial Automotive ControllerPLC type module based on a PIC18F4455 device, produced by MatrixComponent includes functions to drive the functionality of the MIAC and MIAC system.
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 60b296cd_5b02_4c9c_9239_cca36238f480|Bar Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 5d52e8a2_f248_4318_a0ac_e7b9503237cf|Bubble Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ba8897fe_8349_47b3_9072_e823e74131af|Column Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3a68ebf7_1225_4b29_87da_a734c0720591|Line Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 77e27287_6ca9_44f7_a160_d338d87b68de|Pie Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 64f4811d_e83f_4e82_be8a_9e857f6ec6e6|Polar Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b49da131_faf9_4bd7_bcdf_323016e64ffd|Radar Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 387b4d2c_fc0f_44c0_a2ad_5fa05ed7db82|Ternary Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0187d13d_8822_4e75_ab22_474c7058ebe4|XY Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 596e6f4d_d87a_4e8b_b108_c0501127c382.png|Image]] [[Component: ID 596e6f4d_d87a_4e8b_b108_c0501127c382|MIAC (dsPIC) (MIAC (dsPIC))]]
-| MIAC - Matrix Industrial Automotive Controller (dsPIC)
 |}
-===MIAC: Addon Modules===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 184de24b_daf7_457c_95cb_d9b97b939839.png|Image]] [[Component: ID 184de24b_daf7_457c_95cb_d9b97b939839|MIAC (PIC) CAN Slave]]
+</tab>
-| MIAC Slave for MIAC System. Requires Slave firmware program downloaded to a MIAC (PIC) to act as a CAN connected Slave device.
+<tab name="Storage ">
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
 |-
-|width=30%|[[File:Component Icon e8461f5f_751e_432e_9fa1_ca725f0001b1.png|Image]] [[Component: ID e8461f5f_751e_432e_9fa1_ca725f0001b1|MIAC Advanced]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Buffer
+|-
-| Advanced Addon for MIAC System
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 201d99f7_acf8_481d_a703_61860c2ba3ea|Circular Buffer (16-bit)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c34f9b8a_a915_4f75_ad0c_87f2ad670a8a|Circular Buffer (8-bit)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ed491c82_9f85_4627_93ce_d2b588352539|Circular Buffer (Float)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | File
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 7d0c33a1_0aaa_4250_84bb_f96fc113abac|CSV Read/Write]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 42f3f8ef_ff5b_44e6_9be8_8c43d9ab5b08|Embed File]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3022653d_9f9f_4981_b558_9ed8d265c931|Event Log]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 9cb6d9da_5555_4e1c_a65c_93b299b6011c|File Access]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 8c6ad2c7_f4a7_4584_a376_ec7fed05e5d3.png|Image]] [[Component: ID 8c6ad2c7_f4a7_4584_a376_ec7fed05e5d3|MIAC Basic]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f54fa744_5af4_4c08_bdb9_fb31848a2b63|XML JSON Parser]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Basic Addon expansion module for MIAC System
 |-
-|width=30%|[[File:Component Icon 6ab6c413_80f6_4db4_9b1d_458412446d4c.png|Image]] [[Component: ID 6ab6c413_80f6_4db4_9b1d_458412446d4c|MIAC Bluetooth]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Utility
-| Bluetooth Addon for MIAC System
 |-
-|width=30%|[[File:Component Icon bd4a15a6_c326_4762_8573_3e7a6fde7d88.png|Image]] [[Component: ID bd4a15a6_c326_4762_8573_3e7a6fde7d88|MIAC GPS]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 34f258e1_5c8c_4519_b29d_aba7cbf41faf|Advanced String Functions]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| GPS Addon expansion module for MIAC System
 |-
-|width=30%|[[File:Component Icon 018199e8_ef66_49af_bac0_483043d71830.png|Image]] [[Component: ID 018199e8_ef66_49af_bac0_483043d71830|MIAC GSM]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID dfb4d07a_3d70_45d5_83ef_07e3c95d86ab|Lookup tables]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| GSM Addon for MIAC System.
 |-
-|width=30%|[[File:Component Icon 4c1bd3cf_a504_4a05_9ae7_318d6a4f9a07.png|Image]] [[Component: ID 4c1bd3cf_a504_4a05_9ae7_318d6a4f9a07|MIAC Industrial]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 819d0c05_aaa2_4431_84dc_d40f3eee1b54|Property Manager]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| MIAC Industrial Addon component for MIAC System.Add (WIZ810MJ) TCP/IP or Webserver component to the panel to add functionality.
 |-
-|width=30%|[[File:Component Icon 126523d0_e391_4ccb_86c0_0e9d1b33d5f0.png|Image]] [[Component: ID 126523d0_e391_4ccb_86c0_0e9d1b33d5f0|MIAC Serial]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a8abdc98_224c_4c8a_8311_2921cb3dbe46|String Initialiser]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Serial Addon expansion module for MIAC System
 |-
-|width=30%|[[File:Component Icon b5e4faac_ed09_4e4c_a644_09e1e151a405.png|Image]] [[Component: ID b5e4faac_ed09_4e4c_a644_09e1e151a405|MIAC Zigbee Coordinator]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 306b3759_a92f_4779_b15f_93a9e35a75bf|String Translator]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| MIAC Zigbee Coordinator Addon component for MIAC System.Add the Zigbee component to the panel to add functionality.
 |-
-|width=30%|[[File:Component Icon 8dd620e3_3cdb_4d8a_ba3d_cd4dbca0ba34.png|Image]] [[Component: ID 8dd620e3_3cdb_4d8a_ba3d_cd4dbca0ba34|MIAC Zigbee Router]]
-| MIAC Zigbee Router Addon component for MIAC System.Add the Zigbee component to the panel to add functionality.
 |}
-===Misc Circuit===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon b4f41fb0_9335_4a8f_a41d_284a8cfc31b5.png|Image]] [[Component: ID b4f41fb0_9335_4a8f_a41d_284a8cfc31b5|LED Cube]]
+</tab>
-| LED Cube component for driving 3D arrays of LEDs. A typical cube could consist of 4x4x4 or 8x8x8 but does not necessarily need to be a cuboid.
+<tab name="Math">
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Calculation
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a78483e1_b293_47e7_984c_55984fc93571|Base 64]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 9a2a044c_10f5_437c_b5fa_0ec949130f36|Linear Feedback Shift Register]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ccdce31d_a1a3_437a_88ba_5431745ddf6e|Map Function]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b3061d15_325b_4a8f_863a_a059fab79caf|Median 16-bit]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f2e05e6d_1864_465b_8d1d_0fc9238a7535|Median 32-bit]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c211fc8f_6f17_461f_a44b_01dbc2368fbe|Median Float]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e4dbf608_6521_4e08_a1f5_46b012fc8cc1|Standard Deviation]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 6508c7be_063a_4f9f_bae5_4a41cf977a86|Type Conversions]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Timing
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a96ddf9d_631d_4db7_a66e_c709e2de7164|Time Stamp]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f137a538_3ebf_42e7_a941_b8f628802070|Timed Event Trigger]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 144a220f_7bc3_4b73_bc56_f9c7203bf204.png|Image]] [[Component: ID 144a220f_7bc3_4b73_bc56_f9c7203bf204|RGB Xmas Tree]]
-| Component complete with macros and simultion to drive the MatrixTSL RGB Xmas Tree decoration.
 |}
-===Raspberry Pi Hat===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 165242cb_b40c_416e_a435_1fe7e724c5b8.png|Image]] [[Component: ID 165242cb_b40c_416e_a435_1fe7e724c5b8|Sense Hat]]
+</tab>
-| A component to drive various features on the Raspberry Pi Sense Hat.Supported Features: 8x8 RGB LED / 5-Way Joystick
+<tab name="DSP">
-|}
-===Robotics===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon e3be641a_8808_4138_bee5_805fbbce468c.png|Image]] [[Component: ID e3be641a_8808_4138_bee5_805fbbce468c|Formula AllCode (RB4420)]]
-| A component to allow all the features of the Formula AllCode robot to be investigated.Fully simulated component which can interact with simulated objects on the panel as well as control the real hardware.
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | DSP Inputs
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID fdef1c85_689b_4e44_81dc_7ab15dec21a6|Data Queue to Bits]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 73c1c565_8d04_44dd_ab78_1997d5e3c641|Input CSV]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c73d493a_b6a0_4dbe_b4b5_79648f67d11e|Input Digital]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c7648111_2a14_475e_980d_c7106ff9d3d0|Quadrature Generator]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID cbe42abc_5955_44da_a6d0_03e7cbcdcaca|Waveform Generator]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | DSP Outputs
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 44e22c6d_4e79_4eb3_b2e1_7ff2fecb3e08|Bits to Data Queue]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e648c3de_ec39_4a3f_bbd9_46e45cce4a63|Level]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 5142bd81_abad_444b_b6db_36a87dce5835|Output CSV]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 1392d5c3_35ba_4c7f_a539_7f30a09758e4|Output Digital]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 9d5300ab_57ae_4483_8f18_04ec2007b406.png|Image]] [[Component: ID 9d5300ab_57ae_4483_8f18_04ec2007b406|Formula Flowcode]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | DSP Operators
-| A component to allow all the features of the Formula Flowcode robot to be investigated.Fully simulated component which can interact with simulated objects on the panel as well as control the real hardware.
-|}
-==API==
-===AllCode===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 4182ece3_6ad5_41d3_a0e2_31bc570806db.png|Image]] [[Component: ID 4182ece3_6ad5_41d3_a0e2_31bc570806db|Formula AllCode API]]
-| A simulation only component to allow the Formula AllCode robot to be controlled via it's API interface and Bluetooth data connection without having to compile or re-program the robot.
 |-
-|width=30%|[[File:Component Icon 482486a9_7207_4b46_9e63_5c459534ab19.png|Image]] [[Component: ID 482486a9_7207_4b46_9e63_5c459534ab19|MIAC AllCode API (dsPIC)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 104899e2_8b2e_4854_923c_5a614c1b8a3c|Adder]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| MIAC AllCode.dsPIC version of the MIAC loaded with the AllCode firmware.Usefull for SCADA, Control or Test applications.Allows you to control the MIAC using the programming language of choice.Compatible with simulation / Bluetooth / Wifi / RS232 and RS485
 |-
-|width=30%|[[File:Component Icon eabeda20_432c_4554_80b3_5851d675a9e7.png|Image]] [[Component: ID eabeda20_432c_4554_80b3_5851d675a9e7|MIAC USB Slave API (PIC)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d347e8eb_a0f2_45d5_8f31_7aba7f4e56b7|Averager]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows Matrix's MIAC PLC  to be used as a PC peripheral controlled by Flowcode via a USBconnection. Requires that the MIAC (PIC) has the USB Slave firmware downloaded to it.
 |-
-|width=30%|[[File:Component Icon 83c10dbf_a8d2_42d0_8be5_60adbe2d49b1.png|Image]] [[Component: ID 83c10dbf_a8d2_42d0_8be5_60adbe2d49b1|Robot Arm AllCode API]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0b1d97c1_ee89_45a5_8c39_114cd6d552ad|Deinterlace]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Matrix 5-axis Robot Arm with Gripper.Compatible with the Matrix Robot ARM Training Curriculum and Hardware.Features gripper pressure sensor, light sensor, colour sensor, Potentiometer, Magnetic sensor.
 |-
-|width=30%|[[File:Component Icon 76e989d0_a2ed_457f_a293_3025b804f433.png|Image]] [[Component: ID 76e989d0_a2ed_457f_a293_3025b804f433|Robot Arm v2]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e0ddc704_6bab_4d08_8f10_19a14c6683ef|Delay]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Drives the Matrix Robot Arm v2 hardware via the AllCode API.Allows connections via USB, Bluetooth and WIFI.
-|}
-===Comms Data Injectors===
-{| class="wikitable" width="85%"
-|+|-
-|[[File:Component Icon 5a237757_52e5_414b_b6e4_79c7b784c3ba.png|Image]] [[Component: ID 5a237757_52e5_414b_b6e4_79c7b784c3ba|Injector (AT)]]
-|Comms data injector to replicate basic AT command syntax.
-The component will record each incoming character until the termination character is received.
-Once this happens the component will respond by echoing back the received data followed by an "OK"  reply.
 |-
-|[[File:Component Icon 299cb595_3e6f_4022_a728_b9df1434262c.png|Image]] [[Component: ID 299cb595_3e6f_4022_a728_b9df1434262c|Injector (CAN)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f804a7bd_0280_4ff7_ab75_63be77fb2af3|Fast Fourier Transform (FFT)]]
-|Comms data injector to allow CAN message identifiers to be decoded to specific message strings.
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-Uses an external CSV file to specify the IDs and descriptive strings.
 |-
-|[[File:Component Icon 002be1ac_efff_4c07_95de_1eab087cb25e.png|Image]] [[Component: ID 002be1ac_efff_4c07_95de_1eab087cb25e|Injector (COM)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 317efb6a_2bad_4f83_a0bc_4ada0f4cd51e|Filter]]
-|Comms data injector to allow a COM port peripheral to be attached to a comms component.
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-The component will forward any outgoing bytes to the COM port and forward any incoming bytes to the comms component.
-Useful for controlling hardware such as Bluetooth, RS232, USB to Serial, MODBUS...
 |-
-|[[File:Component Icon 8d670813_9a40_4891_accc_c1bf864b8217.png|Image]] [[Component: ID 8d670813_9a40_4891_accc_c1bf864b8217|Injector (DS1307 RTC)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 23b8de7f_5214_4f77_9bac_4982123b8d4b|Interlace]]
-|Comms data injector to allow simulation of a DS1307 Real Time Clock and RAM.
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|[[File:Component Icon 50738af3_82a5_4074_a9b8_9f8f80be2b87.png|Image]] [[Component: ID 50738af3_82a5_4074_a9b8_9f8f80be2b87|Injector (File)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 83fac7ac_b7b5_4cc4_890a_394cbf16cf71|Kalman Filter]]
-|Comms data injector to allow data to be streamed to and from a file during simulation.
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-The component will read data from the incoming file and write data to the outgoing file.
 |-
-|[[File:Component Icon c6d16a4d_a800_4636_98c5_70f7bde65654.png|Image]] [[Component: ID c6d16a4d_a800_4636_98c5_70f7bde65654|Injector (GPS NMEA)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 82872714_f0f0_4758_91ec_bd39d2cdddc8|Math]]
-|Comms data injector to allow simulation of NMEA style GPS messages
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|[[File:Component Icon 2ed54982_ef92_4509_a67c_7b3a72f91279.png|Image]] [[Component: ID 2ed54982_ef92_4509_a67c_7b3a72f91279|Injector (Human Interface)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID facc8c89_963a_408e_985e_ed768a52b01a|Median]]
-|Comms data injector to allow typed data values to be inserted into a component.
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-Allows data to be input in raw ASCII form or as numeric byte data 0-255.
 |-
-|[[File:Component Icon 31d48d3e_01e3_4546_96e5_2e935f963166.png|Image]] [[Component: ID 31d48d3e_01e3_4546_96e5_2e935f963166|Injector (Loopback)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a9e01aa0_f224_4902_a558_6a199fc039c5|Multiplex]]
-|Comms data injector to replicate a basic loopback setup.
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-The component will return any outgoing data back to the receiver.
 |-
-|[[File:Component Icon 927d2882_ab2f_43e9_8690_d1d6891001ee.png|Image]] [[Component: ID 927d2882_ab2f_43e9_8690_d1d6891001ee|Injector (SCADA Slave Analog Input)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 88a7dbc4_af92_4205_8943_abaa77504462|Offset]]
-|Data injector to allow a physical analog input pin to be attached to a simulated component.
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-The component will poll for any input state changes via SCADA Slave enabled hardware.
-Enabling the Flowcode simulation runtime to directly interface with a physical I/O pin.
 |-
-|[[File:Component Icon dbc62603_09e5_4a5e_8df3_22b921d9e9e9.png|Image]] [[Component: ID dbc62603_09e5_4a5e_8df3_22b921d9e9e9|Injector (SCADA Slave Digital Input)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 34b6f31b_7e33_4beb_891e_defacbee8587|On/Off Control]]
-|Data injector to allow a physical digital input pin to be attached to a simulated component.
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-The component will poll for any input state changes via SCADA Slave enabled hardware.
-Enabling the Flowcode simulation runtime to directly interface with a physical I/O pin.
 |-
-|[[File:Component Icon 916e4f8c_ea50_4d16_bcbb_60492d600217.png|Image]] [[Component: ID 916e4f8c_ea50_4d16_bcbb_60492d600217|Injector (SCADA Slave Digital Output)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e6dd1315_4acf_4fb5_abd9_5743d3715cbe|PID Control]]
-|Data injector to allow a physical digital output pin to be attached to a simulated component.
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-The component will forward any output state changes through to a SCADA Slave enabled hardware.
-Enabling the Flowcode simulation runtime to directly interface with a physical I/O pin.
 |-
-|[[File:Component Icon e9f80ee2_3377_4c1f_856b_eb42da1eff02.png|Image]] [[Component: ID e9f80ee2_3377_4c1f_856b_eb42da1eff02|Injector (SCADA Slave I2C)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 939a5d54_28c7_488d_af39_46f7c5d2c429|Rectifier]]
-|Comms data injector to allow a I2C bus peripheral to be attached to a comms component.
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-The component will forward any byte transactions through to a SCADA Slave enabled hardware.
-Enabling the Flowcode simulation runtime to directly drive a physical I2C bus.
 |-
-|[[File:Component Icon 08d6aad0_ffe7_4c11_af82_0faa2cb6abcf.png|Image]] [[Component: ID 08d6aad0_ffe7_4c11_af82_0faa2cb6abcf|Injector (SCADA Slave SPI)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f1af5256_1dee_491c_b43f_fdc8f33279fb|Scale]]
-|Comms data injector to allow a SPI bus peripheral to be attached to a comms component.
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-The component will forward any byte transactions through to a SCADA Slave enabled hardware.
-Enabling the Flowcode simulation runtime to directly drive a physical SPI bus.
 |-
-|[[File:Component Icon 1b5acb6c_d16d_483b_9868_cf406165ac55.png|Image]] [[Component: ID 1b5acb6c_d16d_483b_9868_cf406165ac55|Injector (SCADA Slave UART)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 907f24e9_a8a3_46ea_942d_67dc55f7eb44|Simulated Control Load]]
-|Comms data injector to allow a Serial UART peripheral to be attached to a comms component.
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-The component will forward any byte transactions through to a SCADA Slave enabled hardware.
-Enabling the Flowcode simulation runtime to directly drive a physical UART.
 |-
-|[[File:Component Icon b81ab4d7_be8f_4ddd_b5dc_937bda03dc82.png|Image]] [[Component: ID b81ab4d7_be8f_4ddd_b5dc_937bda03dc82|Injector (Flowcode vNet)]]
-|Comms data injector to allow components to talk to each other between instances of Flowcode.
-The injector allows the data to be sent and received between multiple instances of Flowcode
-either running on a single machine, across a network or via the internet.
 |}
-===SCADA Slaves===
+</tab>
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon c7edc169_d417_46ec_ad9b_983ee0326e29.png|Image]] [[Component: ID c7edc169_d417_46ec_ad9b_983ee0326e29|SCADA (Arduino Mega)]]
+<tab name="Comms">
-| Connects to an Arduino Mega running the SCADA Arduino Mega Firmware allowing the board to become a slave to the flowcode simulation runtime.Supports: Digital IO / ADC / I2C / SPI / UART / PWM
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Comms: Interface
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID cbb3c28e_2d73_4442_ac52_23a3b45d9870|COM Port]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 63de6312_8008_46d2_8a0c_bb66e56674e2|LIN Master]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Comms: System
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d04f4385_497d_4e46_a71d_2c0ccb4b0421|J1939 Automotive Node]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 97647329_1e06_46dc_ba11_9d721038294d|Modbus Master (SCADA)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a93b1f52_b96d_4a14_806e_63f73d2654b2|Modbus Slave (SCADA)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 019e3dbb_2bfa_44a7_baf0_17b672d9b8f4|Modbus TCP Master]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 1ecb9b0a_53e7_45c9_ab6f_7a0d4a0c47e1|Modbus TCP Slave]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 69c3c380_182a_4ba7_8043_9c9732b498fa|OBD2 ECU (Server)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Comms: IoT/Cloud
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 72cd9559_26f7_4ffd_984c_cf3a82a6db16|BBC News]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID df96ffa1_4d36_453a_8877_758f68a2676c|BBC Weather Forecast]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID bf90426c_1763_4a7a_be5c_b3e442e3f6d8|BBC Weather Observation]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 2740a93b_32a9_48d1_8fc3_089d13b50bb5|IoT Made Easy]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 2b53c2f2_b5d4_4e36_a647_6f9238744a75.png|Image]] [[Component: ID 2b53c2f2_b5d4_4e36_a647_6f9238744a75|SCADA (Arduino Uno)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 6af7744a_76aa_4522_8cf1_05c8bd34859c|JSON Decoder]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Connects to an Arduino Uno running the SCADA Arduino Uno Firmware allowing the board to become a slave to the flowcode simulation runtime.Supports: Digital IO / ADC / I2C / SPI / PWM
 |-
-|width=30%|[[File:Component Icon 556754b4_bed5_4bcd_88dd_fb13f92020d6.png|Image]] [[Component: ID 556754b4_bed5_4bcd_88dd_fb13f92020d6|SCADA (BL0032)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f2ad060d_0ae3_43d2_9d82_f49eb4215240|JSON Encoder]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Connects to an BL0032 running the SCADA BL0032 Firmware allowing the board to become a slave to the flowcode simulation runtime.Supports: Digital IO / ADC / I2C / SPI / UART / PWM
 |-
-|width=30%|[[File:Component Icon c9197106_edf6_4dcc_9654_ea56ad26f370.png|Image]] [[Component: ID c9197106_edf6_4dcc_9654_ea56ad26f370|SCADA (ECIO28P)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 459c9cfb_82e3_40ad_9456_54fc40ba5e6c|MQTT Client]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Connects to an ECIO28P running the SCADA ECIO28P Firmware allowing the board to become a slave to the flowcode simulation runtime.Supports: Digital IO / ADC / I2C / SPI / PWM / UART
 |-
-|width=30%|[[File:Component Icon 40d5f2e2_3fb5_479a_91e1_f8ec3aae9e3a.png|Image]] [[Component: ID 40d5f2e2_3fb5_479a_91e1_f8ec3aae9e3a|SCADA (ECIO40P)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Comms: Networking
-| Connects to an ECIO40P running the SCADA ECIO40P Firmware allowing the board to become a slave to the flowcode simulation runtime.Supports: Digital IO / ADC / I2C / SPI / PWM / UART
 |-
-|width=30%|[[File:Component Icon e52b2356_d8b7_458b_8583_71f208bfd572.png|Image]] [[Component: ID e52b2356_d8b7_458b_8583_71f208bfd572|SCADA (ESP32)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 91049bf5_2436_42dc_947a_c30c86463d98|Network Communications]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Connects to a ESP32 running the SCADA RPI Firmware allowing the board to become a slave to the flowcode simulation runtime.Supports: Digital IO / ADC / I2C / SPI / PWM / UART
 |-
-|width=30%|[[File:Component Icon ed171d42_05fd_4946_9bf1_e59a9c98c5b8.png|Image]] [[Component: ID ed171d42_05fd_4946_9bf1_e59a9c98c5b8|SCADA (Interface Board)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a1c9b843_a641_4b9c_b762_26995b8f9464|Webserver (GENERIC - Flash / File)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Connects to a Embeddded Interface Board running the SCADA Firmware allowing the board to become a slave to the flowcode simulation runtime.Supports: Digital IO / ADC / I2C / SPI / PWM / UART / DAC / Servo.
-See Instructables for open source project files.
 |-
-|width=30%|[[File:Component Icon ec492589_4787_4b79_96df_718f9a2b46f1.png|Image]] [[Component: ID ec492589_4787_4b79_96df_718f9a2b46f1|SCADA (RPI)]]
-| Connects to a Raspberry Pi running the SCADA RPI Firmware allowing the board to become a slave to the flowcode simulation runtime.Supports: Digital IO / I2C / SPI / PWM / UART
 |}
-===Third Party===
+</tab>
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon eedbc87c_0433_4f67_86c5_a106439fc603.png|Image]] [[Component: ID eedbc87c_0433_4f67_86c5_a106439fc603|FTDI (FTD2XX)]]
+<tab name="Hardware">
-| Simulation only interface to allow communications with a FTDI USB 232 IC connected to the system.For more details refer to the D2XX_Programmers_Guide from FTDI.
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | E-blocks 2 Sensors
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 940ad7e9_abab_434f_a5e3_ff50e2fdf962|Accel / Gyro 6-Axis (Grove 105020012)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 563f8662_1205_4508_9e07_0b54471683f3.png|Image]] [[Component: ID 563f8662_1205_4508_9e07_0b54471683f3|K8055D]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b52758bf_4466_48c0_8054_33ee4b11e82b|Barometer (BMP280 / Grove 101020192)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Support for the Velleman K8055 USB input/output board.Allows Flowcode to communicate with up to four K8055 boards, or to simulate them withinteractive on-screen controls.  All digital and analog I/O functions are supported.
 |-
-|width=30%|[[File:Component Icon 66309a73_20da_4f2f_bb92_c4749cfad84c.png|Image]] [[Component: ID 66309a73_20da_4f2f_bb92_c4749cfad84c|PicoScope (PS2000)]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID a1ea988c_88c9_4f96_ac26_1684e918a3de|Colour Sensor (Grove 101020341)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| A set of functions designed for interacting with a 2000 series Pico scope via simulation.
 |-
-|width=30%|[[File:Component Icon 8c08bf29_be7e_4408_92bc_91c476fb70db.png|Image]] [[Component: ID 8c08bf29_be7e_4408_92bc_91c476fb70db|TTI Power Supply _ PL155_P (TTI PL155-P PSU)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID eca89720_1386_4589_ab75_6c0425162b91|Temp / Humidity (Grove 101020212)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| TTI PL155-P Power Supply Unit Component. 15V - 5A
 |-
-|width=30%|[[File:Component Icon 3c01caaa_b732_49a0_b15e_7c9d98878b19.png|Image]] [[Component: ID 3c01caaa_b732_49a0_b15e_7c9d98878b19|TTI TG5011 Signal Generator (TG5011)]]
-| TTi TG5011 50 MHz Signal Generator
 |}
-==Runtime==
+</tab>
-===Controls===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon a11aa47b_7c82_4dad_b62d_b1a263e2a4fe.png|Image]] [[Component: ID a11aa47b_7c82_4dad_b62d_b1a263e2a4fe|Circular Knob]]
+<tab name="API">
-| A circular 2d knob component.
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | AllCode
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID bd23228f_b173_4135_ab3b_a4c3c4caa7a8|Control]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c3e5eb13_e03d_4ca6_be4d_1c63ad107a35|Electrical Machines]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4182ece3_6ad5_41d3_a0e2_31bc570806db|Formula AllCode API]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 482486a9_7207_4b46_9e63_5c459534ab19|MIAC AllCode API (dsPIC)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a34ee78a_4a97_4e95_a5f6_3a9fa3de7167|MIAC NXT AllCode API]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID eabeda20_432c_4554_80b3_5851d675a9e7|MIAC USB Slave API (PIC)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#FFFFFF;" | [[Component: ID 76e989d0_a2ed_457f_a293_3025b804f433|Robot Arm v2]]
+| width="20%" align="center" style="background-color:#FFFFFF;" | both
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | API Slave Devices
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c7edc169_d417_46ec_ad9b_983ee0326e29|API (Arduino Mega)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 2b53c2f2_b5d4_4e36_a647_6f9238744a75|API (Arduino Uno)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 556754b4_bed5_4bcd_88dd_fb13f92020d6|API (BL0032)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c9197106_edf6_4dcc_9654_ea56ad26f370|API (ECIO28P)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 40d5f2e2_3fb5_479a_91e1_f8ec3aae9e3a|API (ECIO40P)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e52b2356_d8b7_458b_8583_71f208bfd572|API (ESP32)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ed171d42_05fd_4946_9bf1_e59a9c98c5b8|API (Interface Board)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ec492589_4787_4b79_96df_718f9a2b46f1|API (RPI)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Test Equipment
 |-
-|width=30%|[[File:Component Icon 1f50402b_cc0b_468c_a329_5108c448e263.png|Image]] [[Component: ID 1f50402b_cc0b_468c_a329_5108c448e263|Control Knob]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 66309a73_20da_4f2f_bb92_c4749cfad84c|PicoScope]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Rotary control designed for SCADA.Has customisable value markings around the control.Simulation only.
 |-
-|width=30%|[[File:Component Icon b50d5c0a_2340_4f67_b276_7bc0235de8a3.png|Image]] [[Component: ID b50d5c0a_2340_4f67_b276_7bc0235de8a3|Image Switch]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 8c08bf29_be7e_4408_92bc_91c476fb70db|TTI Power Supply - PL155-P]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simple simulation only switch capable of displaying an image and with a coloured border to make it easy to tell when the switch is being clicked.
 |-
-|width=30%|[[File:Component Icon 29e63c23_636f_4f9a_b691_ba1a717e3503.png|Image]] [[Component: ID 29e63c23_636f_4f9a_b691_ba1a717e3503|Joystick]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3c01caaa_b732_49a0_b15e_7c9d98878b19|TTI TG5011 Signal Generator]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simple joystick component allowing for easy mouse or touchscreen based analogue control.
 |-
-|width=30%|[[File:Component Icon b6909b43_7bfb_433f_8fdb_3b7d457ea73d.png|Image]] [[Component: ID b6909b43_7bfb_433f_8fdb_3b7d457ea73d|LinearSlider]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Third Party
-| A linear 2d slider component.
 |-
-|width=30%|[[File:Component Icon 3bdcb2e0_ed44_451f_9889_66f316359482.png|Image]] [[Component: ID 3bdcb2e0_ed44_451f_9889_66f316359482|Simulation Switch Template]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID eedbc87c_0433_4f67_86c5_a106439fc603|FTDI (FTD2XX)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A base for building switches that do not download to chip.Mouse interaction can send 'System.User' events with the following data...ID = The handle of the switch component sending the messageMessage = 1 (on) or 0 (off)Current state can also be read via simulation macros.
 |-
-|width=30%|[[File:Component Icon 4b8ae722_573a_473d_8455_a2e6edad1f36.png|Image]] [[Component: ID 4b8ae722_573a_473d_8455_a2e6edad1f36|Switch]]
-| A 2d switch component.
 |}
-===Indicators===
+</tab>
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 995fa4f2_71ce_4d91_aa62_87f731ae7e7d.png|Image]] [[Component: ID 995fa4f2_71ce_4d91_aa62_87f731ae7e7d|Circular Gauge]]
+<tab name="API Library">
-| A circular 2d gauge component.
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | API Audio
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 2061d38d_0cca_440c_a842_f9c84ca55f90|DFPlayer (MP3 / WAV)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0a5d4625_78e6_4bf3_a802_925c655ef718|Heelight Sensor (Grove 101020312)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | API Comms
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID da332928_6342_4c2c_afc7_eaf33917d33e|CAN (Internal, MCP2515)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 24219805_113d_4b12_b6bd_e1b0b0c33981|I2C Master]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d04f4385_497d_4e46_a71d_2c0ccb4b0421|J1939 Automotive Node]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 43861adb_8a59_492d_8f9f_a08775800bc1|MULTIUART]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 69c3c380_182a_4ba7_8043_9c9732b498fa|OBD2 ECU (Server)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 55831e22_7885_4e0f_a9de_73ebda9d7fe9|One Wire (DS2482)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 055a7ab6_78df_47ca_b967_143485c4d706|RFID (Sparkfun Quiic / ID-12LA)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 96862c4d_debc_45fa_9433_74711a4b9a3b|SPI Master]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c73616d1_7ad0_45d9_aada_69ccfa4c5efc|UART (RS232)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | API Display
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 8a7a90d2_3274_4433_8609_699e976e0719|GLCD (Grove OLED)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ebf9c18e_044e_41e2_b845_da14e744b25f|GLCD (SH1106) I2C]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f6ab6074_68ba_4cd4_9274_f973102f8518|GLCD (SSD1306) I2C]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 6548a7da_7e0b_4d45_ad92_f61bf5713442|GLCD (SSD1327) I2C]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 496cf2f0_4220_4f70_9219_7c67c672e36e|GLCD (ST7036) I2C]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f45468b8_5731_4bfb_b5c0_4042ef1dd1da|LCD (Grove - I2C)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 31326041_9339_4cf4_b609_c14cc66318b3|LCD (Grove - UART)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID bcd6a955_12c6_4ed4_a22f_f16eb62e0762|LCD I2C (Backpack)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3cf64267_8c56_47b0_84a1_a933a77716bc|LCD I2C (LCM1602)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c198e346_6b0f_4309_973c_78d7207e0b96|LCD SPI (MiniClick)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | API Environmental
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c416a604_834b_48ba_a5e8_a47cad4f08de|Air Quality (BME688)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a9eb79b0_1d24_4acf_aade_d3639aa800c7|Barometer (BME280)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 38f89887_af35_470e_8c6f_c91f3c99e88d|Barometer (BMP180)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b52758bf_4466_48c0_8054_33ee4b11e82b|Barometer (BMP280 / Grove 101020192)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ca60c1d2_fb77_4e3e_9d01_c4496d35db1e|Barometer (DPS310)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b8c43425_121c_4dfc_8a70_665973e9938b|Barometer (MS5637)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 36175036_08af_4bcf_8dd2_1c46f6761385|Magnetometer (BMM150)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID caa29480_5f50_4c3b_8dac_22cfb8e36999|Pulse Oximeter (Max30100)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID eca89720_1386_4589_ab75_6c0425162b91|Temp / Humidity (Grove 101020212)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component:_ID_2755f2ee_60e0_4e4d_9bce_8bffb3a6a730|Temp / Humidity (AHT10)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 66e6f00d_d894_49de_a768_02997eaf45e1|Temp / Humidity (HTS221)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 75d7da2a_c682_4622_ac86_b6eb9ed7a88e|Temp / Humidity (SHT21)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4475d8e8_4f60_48be_8a27_e91d85fbabae|Temp / Humidity (SHT31)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID df4eca75_779f_47ce_9495_56d3233be5e1|Temperature (DS1822)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 783b7689_0c71_44fb_9dde_673e4b7455ba|Temperature (DS18B20)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b42d9405_a751_4622_8fbe_ce512da391ba|Temperature (DS18S20)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID bbf0ab46_623e_44c6_9402_3acfcd9d0006|Temperature (LM75B)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 97e631c7_51d9_4482_9b65_481b390a686d|Thermocouple (MAX31855)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID cbedb7e1_22c3_4edc_80f8_0501f7f9e398|Thermocouple (MAX31856)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 60de8264_7faf_4f77_904e_69bb19909ba8|Thermocouple (MCP960X)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | API Electrical
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ef2427ea_7767_43be_a0c5_6f705e3c2668|Energy Monitor (PZEM-004T)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | API IO
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 937e425e_21c0_4b08_8d8f_0bf80a6391d2|ADC (AD7680)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 235fd689_bfd1_4c4a_a918_6c3c36e9a49f|ADC (MCP356X)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e65e5368_af24_44a9_897e_cb0422fcea27|ADC QUAD + DAC (PCF8591)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3d87ffe9_97c1_4013_a2cd_82c24d0ccb48|DAC (AD5662)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e78d88a0_e132_4f82_988d_59353009b669|DAC (MCP4725)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 940e39a6_d035_4e43_8dbb_455ee4679066.png|Image]] [[Component: ID 940e39a6_d035_4e43_8dbb_455ee4679066|Console Writer]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 70a3bead_e66d_4a76_bc7b_fb1baa86d2e6|DAC (MCP47x6)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simple component to aid in creating and wiriting data to a console tab.
 |-
-|width=30%|[[File:Component Icon b0a73b26_a060_4bbc_a94e_d4ee2fd0edbd.png|Image]] [[Component: ID b0a73b26_a060_4bbc_a94e_d4ee2fd0edbd|Indicator Gauge]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID fab5cf20_8686_4397_8a21_cc936659d5f6|DAC (MCP48x1)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Simulation only round gauge/dial for SCADA applications.  The range of values displayed is easily adjusted.
 |-
-|width=30%|[[File:Component Icon 3705f53b_93ce_4fa7_8947_0b67f098022d.png|Image]] [[Component: ID 3705f53b_93ce_4fa7_8947_0b67f098022d|Indicator Meter]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b6de5668_e0ae_4c1a_9c16_b16aa3f58024|DAC (MCP49x1)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Square analogue panel meter.A simulation only component - the needle value is set solely by the 'SetValue' macro.
 |-
-|width=30%|[[File:Component Icon 05e09581_b11d_46ae_b32d_c6414a6a922d.png|Image]] [[Component: ID 05e09581_b11d_46ae_b32d_c6414a6a922d|LinearGauge]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f484e96a_af4f_434e_a002_70d3f4315dfb|DAC Dual (MCP48x2)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A linear 2d gauge component.
 |-
-|width=30%|[[File:Component Icon 9f9ffa92_a20d_4ba8_94e1_04e45bdea154.png|Image]] [[Component: ID 9f9ffa92_a20d_4ba8_94e1_04e45bdea154|Logo Indicator]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID b66f5769_5e9d_40e7_9159_c6a0552ff86e|DAC Dual (MCP49x2)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simple component to display multiple icons relating to the state of a machine or process.Includes icons such as: tick, cross, alert, stop, go and coloured lights.
 |-
-|width=30%|[[File:Component Icon 64f3c8ad_21a4_4e15_b9aa_c32a2edca893.png|Image]] [[Component: ID 64f3c8ad_21a4_4e15_b9aa_c32a2edca893|Numeric Display]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID adb523db_db13_4d19_bfa3_0fbc177e4d3f|DAC Quad (MCP4728)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows a numeric value to be displayed on the user panel using virtual 7 seg displays.Used for displaying the value of a variable during simulation runtime.Provides up to 5 customisable ranges to automatically alter the colour of the label based on the value.
 |-
-|width=30%|[[File:Component Icon f959d1c6_e0be_415b_abd6_da5b386638f3.png|Image]] [[Component: ID f959d1c6_e0be_415b_abd6_da5b386638f3|Numeric Indicator]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 37025734_a84d_46ad_9078_925beb81f38b|Digital Potentiometer (MCP41XX / MCP42XX)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A 2d numeric indicator component.
 |-
-|width=30%|[[File:Component Icon 0d82e327_2114_430e_812e_9f5b3fe99ef7.png|Image]] [[Component: ID 0d82e327_2114_430e_812e_9f5b3fe99ef7|Numeric Label]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID aba8b3ce_e71c_49c8_a961_d59b36338afa|Digital Potentiometer (MCP41XXX / MCP42XXX)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows a numeric label to be displayed on the user panel.Used for displaying the value of a variable during simulation runtime.Provides up to 5 customisable ranges to automatically alter the colour of the label based on the value.
 |-
-|width=30%|[[File:Component Icon 1bdd06a6_fc18_4990_917d_004c430f855e.png|Image]] [[Component: ID 1bdd06a6_fc18_4990_917d_004c430f855e|Simulation LED Template]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3a3a0802_42b6_4c31_8983_4d043b70b443|Digital Potentiometer (MCP44XX)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Base for creating simulation LEDs and other on/off visual indicators.Choose a 'Target Object' that will change colour when the pin changes;if multiple objects must change color, group them, and target the group.When 'Auto off color" is selected, changing the 'on color' will automaticallychoose an off color by reducing the intensity of the on color.
 |-
-|width=30%|[[File:Component Icon 4ae66a67_562d_4d77_8417_9cd652f4f103.png|Image]] [[Component: ID 4ae66a67_562d_4d77_8417_9cd652f4f103|Speech (RealSpeak)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a69bf9b3_272e_44b3_a47d_22f53c3c0804|Digital Potentiometer (MCP45XX / MCP46XX)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Advanced speech engine allowing realistic text to speech in multiple languages using the RealSpeak voice engine.Available in simulation only.
 |-
-|width=30%|[[File:Component Icon c31acc1a_f3a2_4fe2_b57c_f654379dd832.png|Image]] [[Component: ID c31acc1a_f3a2_4fe2_b57c_f654379dd832|StaticText]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 50eddda0_73c3_4514_b2e0_7e33abeaa162|Grove I2C Motor Driver]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A text component for the 2d panel.
 |-
-|width=30%|[[File:Component Icon 9d05cfe0_9394_4b7f_83fa_7b001e12c5d3.png|Image]] [[Component: ID 9d05cfe0_9394_4b7f_83fa_7b001e12c5d3|String Label]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 76bb1b8c_43da_48d3_b53f_a9907f03a528|IO Expander (MCP23017)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows a numeric label to be displayed on the user panel.Used for displaying the value of a variable during simulation runtime.Provides up to 5 customisable ranges to automatically alter the colour of the label based on the value.
-|}
-===Matrix Tools===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon e2ed1829_6967_4339_98e1_3806650297c5.png|Image]] [[Component: ID e2ed1829_6967_4339_98e1_3806650297c5|Device Helper]]
-| A purely cosmetic component for viewing the details specific to your current selected target microcontroller.Lists stats like ADC resolution, ADC channels, UARTs, SPI, PWM, RAM, ROM etc
 |-
-|width=30%|[[File:Component Icon fc3c670c_502a_418f_a123_649179752383.png|Image]] [[Component: ID fc3c670c_502a_418f_a123_649179752383|FCD helper]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 331daac0_653d_4f45_9822_6408a8258bda|IO Expander (MCP23S17)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A helper control to query the current Flowcode definition XML file.
 |-
-|width=30%|[[File:Component Icon 3e5cc6d0_3e36_46b8_bc40_f238a5735b6e.png|Image]] [[Component: ID 3e5cc6d0_3e36_46b8_bc40_f238a5735b6e|IntOsc Helper]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d43a1c1f_8ad6_4271_9f62_20e1bdf529f0|IO Expander (PCF8574)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A component to help configure the speed of the internal oscillator.Currently only supports 8-bit PIC devices.
 |-
-|width=30%|[[File:Component Icon 5f7b77e5_e979_4010_93f1_e6d98f83bd71.png|Image]] [[Component: ID 5f7b77e5_e979_4010_93f1_e6d98f83bd71|Is Sim]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4616b658_531f_4c5e_981a_4d9fc04f9a36|IO Expander (PCF8575)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simple component designed to aid in detecting if the current code is running in simulation or on a microcontroller.
-|}
-===Runtime Tools===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon cbb3c28e_2d73_4442_ac52_23a3b45d9870.png|Image]] [[Component: ID cbb3c28e_2d73_4442_ac52_23a3b45d9870|COM Port]]
-| Serial based simulation component for use with systems such as RS232, Bluetooth and USB Serial.
 |-
-|width=30%|[[File:Component Icon 7d0c33a1_0aaa_4250_84bb_f96fc113abac.png|Image]] [[Component: ID 7d0c33a1_0aaa_4250_84bb_f96fc113abac|CSV Writer]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID 74571cdc_4f94_4e9a_b56b_376f36424996|Joystick (Sparkfun Quiic)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| A component to simplify the task of creating and dumping data to a CSV file that can be loadedinto Microcoft Excel or LibreOffice Math to create nice charts and graphs.
 |-
-|width=30%|[[File:Component Icon a1da060c_e74a_4e12_bb90_3ddb43265592.png|Image]] [[Component: ID a1da060c_e74a_4e12_bb90_3ddb43265592|Console Debugger (Raspberry Pi)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 94c78e1b_f580_4105_a223_7e40b75d134c|Joystick (Sparkfun Quiic) 2D]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Component to allow printing debug messages to the Raspberry Pi Console.When simulation the component will print the debug messages to the Console window.Raspberry Pi Only
 |-
-|width=30%|[[File:Component Icon 7ade85db_6ca2_48bf_b19c_8148ebda497b.png|Image]] [[Component: ID 7ade85db_6ca2_48bf_b19c_8148ebda497b|Dashboard Text]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 5bd41be2_1b9c_4f30_ba78_84cb29d61ced|PWM 16CH 12Bit (PCA9685)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simulation only text box that can be used to display text and numbers.
 |-
-|width=30%|[[File:Component Icon 33b1e2c6_5509_40bf_a464_167edcbcf571.png|Image]] [[Component: ID 33b1e2c6_5509_40bf_a464_167edcbcf571|Data Recorder Setup]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | API Light
-| A component to allow data from analogue and digital pins to be displayed on the scope window.Compatible with simulation and for showing ICT based debug data.
 |-
-|width=30%|[[File:Component Icon 3022653d_9f9f_4981_b558_9ed8d265c931.png|Image]] [[Component: ID 3022653d_9f9f_4981_b558_9ed8d265c931|Event Log]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e08872a7_6962_4b61_bcca_71389f8ed8d7|Ambient Light]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simulation component designed to create a simple log record of events in your SCADA system.Logs to a file and / or to a console tab including optional automated time stamp.
 |-
-|width=30%|[[File:Component Icon 6ed9452d_1ae7_4f70_991c_6d8085a2d923.png|Image]] [[Component: ID 6ed9452d_1ae7_4f70_991c_6d8085a2d923|Input Message Box]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID a1ea988c_88c9_4f96_ac26_1684e918a3de|Colour Sensor (Grove 101020341)]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| Creates simple dialogue boxes to collect information from a user.Available with multiple button options, OK, Yes / No / Cancel and User String input.
 |-
-|width=30%|[[File:Component Icon eb9025a7_acec_455c_9033_bd4dd2586e05.png|Image]] [[Component: ID eb9025a7_acec_455c_9033_bd4dd2586e05|Keyboard]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e1d52efb_00d4_4e19_ba4c_29b292535ea1|Infrared Array AMG88xx]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Component to allow you to get direct input from the keyboard. Specific keys can be polled to test if they are pressed and provide interaction with the runtime panel.
 |-
-|width=30%|[[File:Component Icon d2a7fe23_7dd2_43ca_ad55_185eec92fdd8.png|Image]] [[Component: ID d2a7fe23_7dd2_43ca_ad55_185eec92fdd8|Message Box]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 488c3a77_9ff2_4e60_9bfd_cf074405e294|Range Time of Flight (VL53L0X)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Creates simple dialogue message box to present a message to a user.
 |-
-|width=30%|[[File:Component Icon 82a800d4_8620_4386_8ba3_25af2768f24e.png|Image]] [[Component: ID 82a800d4_8620_4386_8ba3_25af2768f24e|Mouse]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | API Movement Orientation
-| A component to read the mouse buttons or position of the cursor on the screen.
 |-
-|width=30%|[[File:Component Icon 8e91085e_f978_404f_9de9_56424c4b56dd.png|Image]] [[Component: ID 8e91085e_f978_404f_9de9_56424c4b56dd|Panel Console Viewer]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 20699a0c_0925_40c4_8aa1_35f294e225e6|Accel / Gyro / Mag 9-Axis (LSM9DS1)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| An easy way to display the data from up to four console windows on the panel.
 |-
-|width=30%|[[File:Component Icon b86179cb_b561_4be4_9d12_e51da4248807.png|Image]] [[Component: ID b86179cb_b561_4be4_9d12_e51da4248807|Serial Monitor]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 5d2c6406_e3aa_46bd_8144_57f60194a1e9|Accel / Gyro / Mag 9-Axis (MPU9250)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Allows data from a COM port to be piped through to the console window for easy program status and debugging.
 |-
-|width=30%|[[File:Component Icon b9cd8fbe_d082_4fe3_b1a0_d6f33f8af028.png|Image]] [[Component: ID b9cd8fbe_d082_4fe3_b1a0_d6f33f8af028|Simulation External Input]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 940ad7e9_abab_434f_a5e3_ff50e2fdf962|Accel / Gyro 6-Axis (Grove 105020012)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simulation only component designed to allow a single digital pin to be toggled at a set frequency.Allows things like switch presses or external square waves to be used with the simulation.
 |-
-|width=30%|[[File:Component Icon a96ddf9d_631d_4db7_a66e_c709e2de7164.png|Image]] [[Component: ID a96ddf9d_631d_4db7_a66e_c709e2de7164|Time Stamp]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 75a362f4_d74d_48e7_9790_530f4d0e78b6|Accel / Gyro 6-Axis (MPU-6050)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simple simulation component to collect the current system timestamp as a string.
 |-
-|width=30%|[[File:Component Icon f137a538_3ebf_42e7_a941_b8f628802070.png|Image]] [[Component: ID f137a538_3ebf_42e7_a941_b8f628802070|Timed Event Trigger]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d950cf7c_f9fc_49ba_a486_0d45b6afd1aa|Accel / Gyro 6-Axis (MPU-6886)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Component that will check to see if a predetermined amount of time has passed.Useful for doing things on a regular basis, e.g. every minute or every hour.
 |-
-|width=30%|[[File:Component Icon 51ad4fb4_3b45_4cd0_a74c_87311de8d3a2.png|Image]] [[Component: ID 51ad4fb4_3b45_4cd0_a74c_87311de8d3a2|Tone Generator]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID db2c91d9_4fd5_42b8_98f4_76dfb160dece|Accel / Mag 6-Axis (LSM303D)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A component to generate simple mono tone audio tones for use in alarms or other audible feedback.
 |-
-|width=30%|[[File:Component Icon f54fa744_5af4_4c08_bdb9_fb31848a2b63.png|Image]] [[Component: ID f54fa744_5af4_4c08_bdb9_fb31848a2b63|XML JSON Parser]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d61dd6a6_231e_4244_9e8d_4f15e7ea10d5|Accel / Mag 6-Axis (LSM303DLHC)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A component designed to simplify the collection of data from XML and JSON sources.Parses the raw data and creates a dynamic representation of the data that is easy to navigate and interrogate.Also allows the objects to be manually created or edited and then re-exported as XML or JSON format.
-|}
-===Scenarios===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 62b6ca37_eb0a_4b5f_b2e1_9a732c4e05ce.png|Image]] [[Component: ID 62b6ca37_eb0a_4b5f_b2e1_9a732c4e05ce|3D Printer]]
-| A simulation only version of a very basic 3D printer such as a standard RepRap.
 |-
-|width=30%|[[File:Component Icon a05022fd_6fa1_499d_b885_a7d983e7bfdf.png|Image]] [[Component: ID a05022fd_6fa1_499d_b885_a7d983e7bfdf|Airplane Landing Gear]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 788b85c9_21ae_4fad_ada1_9f118fc8023c|Accelerometer 3-Axis (LIS3DHTR) ]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simulation of an Airplane Landing Gear containing, switches, locking mechanisms and retracting landing gear.
 |-
-|width=30%|[[File:Component Icon 93252f96_a8e5_4d65_8c40_11614bb15b52.png|Image]] [[Component: ID 93252f96_a8e5_4d65_8c40_11614bb15b52|CNC Machine]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 72f0a8c3_2b8f_4723_b22a_4a81873e5151|Accelerometer 3-Axis (LIS3LV02DQ)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A CNC Machine that allows for simulation movement in the X, Y, Z directions and also providing access to the Drill.
 |-
-|width=30%|[[File:Component Icon fde30de0_35ed_40ca_937a_88da6409c1d2.png|Image]] [[Component: ID fde30de0_35ed_40ca_937a_88da6409c1d2|Car Seat]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 2c716005_e9b5_46e3_86f9_30e5268341a9|Accelerometer 3-Axis (MMA8452Q)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| An electric car seat chassis with a series of motors and sensors. Students should workthrough exercises to learn the principles of electric car seats including how to saveand load memory positions.
 |-
-|width=30%|[[File:Component Icon 264eadac_6fe5_43e0_bfb6_969175aaab93.png|Image]] [[Component: ID 264eadac_6fe5_43e0_bfb6_969175aaab93|Daytona Racetrack (HP458)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 447dabf8_4e39_46a5_a3d6_a02341bef0f0|Gyroscope 3-Axis (L3G4200D)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simple race course for the Formula Flowcode and Formula AllCode robot buggies.    Using Matrix product HP458, users are able to construct an exact replica of this course.
 |-
-|width=30%|[[File:Component Icon fc012d2f_082a_4f6f_a61b_314c46477eb2.png|Image]] [[Component: ID fc012d2f_082a_4f6f_a61b_314c46477eb2|Maze Generator (HP458)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 8e4553f8_fce7_4fed_80c1_33de9590a678|Gyroscope 3-Axis I2C (L3GD20)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Creates a simulation only randomised maze out of standard micromouse maze walls and pillars.Compatible with the Formula Flowcode robot.
 |-
-|width=30%|[[File:Component Icon c46023c5_27e5_4122_bf3e_4519f23cfa0c.png|Image]] [[Component: ID c46023c5_27e5_4122_bf3e_4519f23cfa0c|Pedestrian Crossing]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 593b7216_0a11_465c_9cf5_3b809503a72c|Gyroscope 3-Axis SPI (L3GD20)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A set of pedestrian crossing lights complete with manual light control, a simple state machine and anautomatic mode to allow the lights to take care of themselves.
 |-
-|width=30%|[[File:Component Icon fddf4a52_13cf_4a42_b4c5_d525e824a55a.png|Image]] [[Component: ID fddf4a52_13cf_4a42_b4c5_d525e824a55a|Sheep Pen]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID e4f1697e_5571_475a_a2b1_aa7243920422|Magnetometer (SM324)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simple sheep pen simulation with two gates and two sensors.Allows for simple logical control to try and move all the sheep from one pen to another.
 |-
-|width=30%|[[File:Component Icon 0c6b22fc_6e81_4406_aabd_5feb928e6aee.png|Image]] [[Component: ID 0c6b22fc_6e81_4406_aabd_5feb928e6aee|Traffic Light 1_Way]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4c2256c0_4453_4369_8c36_09770d223a09|Magnetometer 3-Axis (HMC5883L)]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A set of one way traffic lights complete with manual light control, a simple state machine and anautomatic mode to allow the lights to take care of themselves.
 |-
-|width=30%|[[File:Component Icon dbf602c1_cb49_4149_bcd3_4a5afeae9a7a.png|Image]] [[Component: ID dbf602c1_cb49_4149_bcd3_4a5afeae9a7a|Traffic Light 2_Way]]
-| A set of two way traffic lights complete with manual light control, a simple state machine and anautomatic mode to allow the lights to take care of themselves.
 |}
-==Creation==
+</tab>
-===2D Shapes===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 93c4effe_9d15_4a15_a750_f47d206143a7.png|Image]] [[Component: ID 93c4effe_9d15_4a15_a750_f47d206143a7|Ellipse]]
+<tab name="Creation">
-| A basic ellipse primitive shape.
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Primitives (2d)
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiBaseChart|Base Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiButton|Button]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiCanvas|Canvas]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiComboBox|ComboBox]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiComplexShape|Complex Shape]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiConnection|Connection]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiEditBox|EditBox]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 9a971ee1_28e0_4e47_9c09_71268383fc75.png|Image]] [[Component: ID 9a971ee1_28e0_4e47_9c09_71268383fc75|Label]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiGauge|Gauge]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A basic text label.
 |-
-|width=30%|[[File:Component Icon 3a376ef4_ada5_4d3f_b255_2cf7139f051d.png|Image]] [[Component: ID 3a376ef4_ada5_4d3f_b255_2cf7139f051d|Line]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiGrid|Grid]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A basic line primitive shape.
 |-
-|width=30%|[[File:Component Icon 9ec41243_060f_42c3_93b0_de81ada331fa.png|Image]] [[Component: ID 9ec41243_060f_42c3_93b0_de81ada331fa|Rectangle]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiImage|Image]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A basic rectangle primitive shape.
 |-
-|width=30%|[[File:Component Icon 8583543f_4a30_428c_baa1_699145e36314.png|Image]] [[Component: ID 8583543f_4a30_428c_baa1_699145e36314|Rounded rectangle]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiLine|Line]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A basic rounded rectangle primitive shape.
 |-
-|width=30%|[[File:Component Icon 16d8b52e_ca01_4309_9afb_5e265b4ae1ca.png|Image]] [[Component: ID 16d8b52e_ca01_4309_9afb_5e265b4ae1ca|Textbox]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiNumericIndicator|Numeric Indicator]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A basic textbox.
-|}
-===3D Shapes===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon bea47ee6_07be_4545_a699_50c160ea12c0.png|Image]] [[Component: ID bea47ee6_07be_4545_a699_50c160ea12c0|Bowl]]
-| A basic bowl primitive shape.
 |-
-|width=30%|[[File:Component Icon 18d0ecea_755f_43f7_9444_9dc9efaf859f.png|Image]] [[Component: ID 18d0ecea_755f_43f7_9444_9dc9efaf859f|Cone]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiShape|Shape]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A basic cone primitive shape.
 |-
-|width=30%|[[File:Component Icon 4cbae05a_fee8_4685_b94c_829abc3466ab.png|Image]] [[Component: ID 4cbae05a_fee8_4685_b94c_829abc3466ab|Cuboid]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiSwitch|Switch]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A basic cuboid primitive shape.
 |-
-|width=30%|[[File:Component Icon c87d4bfd_6d1b_45ea_83b4_63250326b329.png|Image]] [[Component: ID c87d4bfd_6d1b_45ea_83b4_63250326b329|Cylinder]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiText|Text]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A basic cylinder primitive shape.
 |-
-|width=30%|[[File:Component Icon a7b268fb_4991_4ab8_b394_c1d6997c7422.png|Image]] [[Component: ID a7b268fb_4991_4ab8_b394_c1d6997c7422|Diamond]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" | Primitives (3d)
-| A basic diamond primitive shape.
 |-
-|width=30%|[[File:Component Icon b8bf4aa3_e477_4d95_9592_f7f609357658.png|Image]] [[Component: ID b8bf4aa3_e477_4d95_9592_f7f609357658|Hemisphere]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID ec0b30b2_e817_4d34_b227_25ce8b4f46e5|3D Panel Measurement Tool]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| A basic hemisphere primitive shape.
 |-
-|width=30%|[[File:Component Icon 296ec9fd_cf9b_4338_bb42_b92e4326af25.png|Image]] [[Component: ID 296ec9fd_cf9b_4338_bb42_b92e4326af25|Honeycomb]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID component:text|Label]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| A basic honeycomb primitive shape.
 |-
-|width=30%|[[File:Component Icon 783af32a_4d8c_466c_938d_7b3c97e76e83.png|Image]] [[Component: ID 783af32a_4d8c_466c_938d_7b3c97e76e83|Prism]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID component:shape|Shape]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| A basic prism primitive shape.
 |-
-|width=30%|[[File:Component Icon 7a7f8adf_6b2a_4594_a511_94d47124a465.png|Image]] [[Component: ID 7a7f8adf_6b2a_4594_a511_94d47124a465|Pyramid]]
+| width="80%" style="background-color:#e8fcff;" | [[Component: ID component:textbox|Text box]]
+| width="20%" align="center" style="background-color:#e8fcff;" | 3d
-| A basic pyramid primitive shape.
 |-
-|width=30%|[[File:Component Icon b295124a_85ec_4fae_943f_347bb2c50311.png|Image]] [[Component: ID b295124a_85ec_4fae_943f_347bb2c50311|Sphere]]
+|}
-| A basic sphere primitive shape.
+</tab>
-|-
+</tabs>
-|width=30%|[[File:Component Icon 50c4286c_9896_48bd_8b7b_ab5d10540a1a.png|Image]] [[Component: ID 50c4286c_9896_48bd_8b7b_ab5d10540a1a|Tube]]
-| A basic tube primitive shape.
+==Web Developer Components==
-|}
-===Advanced Shapes===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon d497dced_8e07_49d5_a9f9_4e67c43cb186.png|Image]] [[Component: ID d497dced_8e07_49d5_a9f9_4e67c43cb186|Bezel Radiused]]
+<tabs>
-| A purely cosmetic component for creating smoothly radiused bezel or frame to fit around other components, or to define the edges of panel sections.
+<tab name=" Controls">
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
 |-
-|width=30%|[[File:Component Icon c5be1da0_4b4c_49b9_82e5_ea2426f52606.png|Image]] [[Component: ID c5be1da0_4b4c_49b9_82e5_ea2426f52606|Component Label]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" |  Control
+|-
-| Add a label to a component by including this component as a sub-component.The label will always face the viewer and move with its parent object.Text for the label is automatically read from the host component's name or any chosenproperty.
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c68e35f2_92e3_4a48_abd9_4a1818aa1023|Button]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 446d753f_a6dc_489d_b624_f4f191783aa0.png|Image]] [[Component: ID 446d753f_a6dc_489d_b624_f4f191783aa0|Component Labels]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 21cdfa0f_51ac_48a5_9448_53d3460fed47|Check Box]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Automatically generates labels for all panel objects and components in a given context.Labels will always face the camera, and can show the name of each object, or any chosenproperty.  Nesting can be used so that components within components are labelled, and so on.
 |-
-|width=30%|[[File:Component Icon d750dde7_ddbc_4d66_bea1_5a5ae94dfa70.png|Image]] [[Component: ID d750dde7_ddbc_4d66_bea1_5a5ae94dfa70|Marking control]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 46df05de_0544_4c2f_b70a_3d5e40074a0c|Choose Colour]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A control to draw markings on any component
 |-
-|width=30%|[[File:Component Icon 4aead223_94b8_4744_9674_7c21acc80681.png|Image]] [[Component: ID 4aead223_94b8_4744_9674_7c21acc80681|Meter Square]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3d8ea96e_c2b7_4160_87c2_0b17d0511ddc|Choose File]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Square analogue panel meter.A simulation only component - the needle value is set solely by the 'SetValue' macro.
 |-
-|width=30%|[[File:Component Icon 175423b4_b359_4aa7_9bc4_1867301742af.png|Image]] [[Component: ID 175423b4_b359_4aa7_9bc4_1867301742af|RxTx Flasher]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 9d2842d2_c72d_4631_94b3_1186cb496fff|Combo Box]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Simple indicator panel intended as a sub-component of communications components.The two arrow shapes  can be set to flash by the host component to represent incoming andoutgoing data packets.The panel can be labelled and use a custom icon for easy identification.  The icon areacan be set to open a pre-defined console window when clicked.LEDs can also be flashed by sending the component a User Notify event.  Event'Message ID' is ignored.  Data should be:  1, to flash to Rx LED or 2 to flash the Tx LED.
 |-
-|width=30%|[[File:Component Icon f307403b_2134_4efa_bfac_bbd0adc0f253.png|Image]] [[Component: ID f307403b_2134_4efa_bfac_bbd0adc0f253|Scale Arc Template]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c9c426b0_29da_406a_afa3_aa4bd66f785f|Input Text]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A base component for drawing circular dials.  This allows a simple way to create graduatedand labelled dials, for example, within meter and rotary control components.Mouse handling is built in for ease of building interactive controls.
 |-
-|width=30%|[[File:Component Icon 34671299_61e7_40d8_aac1_e33c93759d73.png|Image]] [[Component: ID 34671299_61e7_40d8_aac1_e33c93759d73|Scale Linear Template]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 1aadf780_b159_4970_8c1a_6af1ec49335b|Radio Button]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A base component for drawing scales on horizontal or vertical strips.Can be used to simplify the building of rulers, meters and slider controls.  Mouse handlingis built in for easy construction of interactive controls.
 |-
-|width=30%|[[File:Component Icon 66dc78fd_b0c7_42f8_aaea_ccbb291001fb.png|Image]] [[Component: ID 66dc78fd_b0c7_42f8_aaea_ccbb291001fb|Simulation 7 Seg]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 7e6b63bd_8cda_4b3d_bf64_ec66e9055a25|Slider]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Simulated single digit seven segment display.LED colour can be changed in properties.
 |-
-|width=30%|[[File:Component Icon 0d074f2e_5ff6_45d2_a0a8_1b5c3aa34e41.png|Image]] [[Component: ID 0d074f2e_5ff6_45d2_a0a8_1b5c3aa34e41|Slider control]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID add0cf83_9484_4047_8048_40f00c95972e|Switch]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simple graphical interface for a vertical meter or slider control.  This can be used withincustom components to give them a way to display an analogue value, or to allow settinga value by clicking and dragging with the mouse.
 |-
-|width=30%|[[File:Component Icon 3d632cd0_b8cb_4ca0_8f7a_59f88ac02fa3.png|Image]] [[Component: ID 3d632cd0_b8cb_4ca0_8f7a_59f88ac02fa3|Target Chip]]
-| A cosmetic only representation of the target microcontoller device showing the default package type complete with pins.
 |}
-===Industrial===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 9415f6ca_f29a_46cc_b3e8_f047cf0c598a.png|Image]] [[Component: ID 9415f6ca_f29a_46cc_b3e8_f047cf0c598a|Digital Valve]]
+</tab>
-| A simple digital valve that can be either open or closed. The valve has component macros to set and get the current state of the valve.The valve can be initialised to be open or closed when starting.The valve can be clicked to open or close via the runtime.Compatible with SCADA interconnecting pipe components.
+<tab name=" Indicators">
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
 |-
-|width=30%|[[File:Component Icon 810fd965_8219_4633_a26f_49d73890b4c9.png|Image]] [[Component: ID 810fd965_8219_4633_a26f_49d73890b4c9|Fan Pump]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" |  Indicator
+|-
-| A simple rotating fan or pump.The component has macros to set and get the current rotational speed.Compatible with SCADA interconnecting pipe components.
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 4fc7c04c_c105_4a2b_ba78_27f11d8b2320|Canvas]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID f43a5e51_dae4_4d71_803d_27e56a7b25b2|Gauge]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon cc493328_7354_44de_b2f1_b70afac30dff.png|Image]] [[Component: ID cc493328_7354_44de_b2f1_b70afac30dff|Hopper]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 1b25bcf6_4e20_4646_9eda_8565971d5724|Indicator]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A simple hopper that can be used to store produce.The hopper has component macros to set and get the current level of produce.The hopper can be initialised to be full or empty when starting.Compatible with SCADA interconnecting pipe components.
 |-
-|width=30%|[[File:Component Icon 10253706_19b9_4d0c_b3a2_33fabd2c5b82.png|Image]] [[Component: ID 10253706_19b9_4d0c_b3a2_33fabd2c5b82|Pipe]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID cfb27e2a_028f_4b18_844c_048de6c2d7ee|SevenSeg]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| A Pipe Component
 |-
-|width=30%|[[File:Component Icon 311acbb0_1031_4952_bc15_9524b6b1b074.png|Image]] [[Component: ID 311acbb0_1031_4952_bc15_9524b6b1b074|Right Angle Pipe]]
-| A Right Angle Component For Connecting Pipes Around Corners
 |}
-===Misc Shapes===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon 3a9b473c_04d9_43e2_b6d4_1b22555e16af.png|Image]] [[Component: ID 3a9b473c_04d9_43e2_b6d4_1b22555e16af|Wood Fence]]
+</tab>
-| A simple wooden fence used to create simple walls and pens for simulations.
+<tab name=" Charts">
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID c0afb39c_50ed_44c3_91cc_b15bb0baa6f6|Area Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 33bed1e4_f05f_4a12_a934_a511c24913b9|Bar Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 42f80fc0_5172_44ef_850c_d42d28ef0bd8|Column Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 724dc5b4_8519_41ff_a96d_413275961305|Line Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d2449868_8378_45f5_a9b2_12ed71762d7d|Pie Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 315b8ff5_e86e_4b4a_b823_5d8574101738.png|Image]] [[Component: ID 315b8ff5_e86e_4b4a_b823_5d8574101738|Wood Gate]]
-| A simple gate that can be opened and closed via simulation macros.Used to control the flow of objects in the Flowcode simulator.
 |}
-===Modelling Components===
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon f2dfca22_b0b8_4694_8d30_1c25063578e3.png|Image]] [[Component: ID f2dfca22_b0b8_4694_8d30_1c25063578e3|Animator]]
+</tab>
-| Basic animation and physics simulation for a single object.The target object can be set in motion by a simulation macro call, and will then continue inmotion under the control of the animator.Boundaries can be set beyond which the object cannot move, and the behaviour of the object defined when it meets them.Simple simulation of gravity and friction are also possible.
+<tab name=" Helper">
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" |  Comms
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 209c214a_3fdf_4a09_9354_e2f146dbdedc|HTTP Fetch]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 1ea0baab_69f8_45a5_9eda_aba35d8de3e8|HTTP Params]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 872dba99_b369_457e_b6f1_914a9f35ad19|JSON Decoder]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 0e2759dd_5335_4769_bdb4_5ddea30a6236|JSON Encoder]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID ac5ba24f_d4c3_48e7_9147_e5197de7f7b5|MQTT Client]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 23c1be0a_4c1e_4d83_9de5_47a82d4e4950|SerialPort]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" |  Data
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID a1612734_3758_43e9_b5f1_2b1a35304d19|Array Helper]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 2e5d477d_7e43_4691_95e1_becf96fed02d|Object Helper]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 15f033b8_7422_4475_9e3a_35e5731fb589|Popup Message]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 9d67e3dc_ef9b_4d4d_b294_19c176eefab1.png|Image]] [[Component: ID 9d67e3dc_ef9b_4d4d_b294_19c176eefab1|Clone Matrix]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 58f727d6_1ff6_4e68_80dd_395bdb2143b7|Storage]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| Takes a single object and produces a three dimensional array of evenly spaced clones.Inidividual items in the array can be found from their position and individually modifiedafter the array has been created.
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 30f0236a_7777_4c6f_8ceb_a29b8d5294d1|Timer]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon ddc97f5d_2b6c_4e5a_be40_c5c91123b8cc.png|Image]] [[Component: ID ddc97f5d_2b6c_4e5a_be40_c5c91123b8cc|Motion Helper]]
-| Helper for building components which require simulation of constant motion.Linked objects can be issued speed and acceleration parameters, and will thenbe animated automatically until another command is issued.The helper can control motion for up to four objects simultaneously, all with theirown discrete motion settings.
 |}
-===Peripheral CAL===
+</tab>
-{| class="wikitable" width="85%"
-|width=30%|[[File:Component Icon e77a4e40_e0df_431a_98f8_7ae4d8ebfbeb.png|Image]] [[Component: ID e77a4e40_e0df_431a_98f8_7ae4d8ebfbeb|ADC (CAL)]]
+<tab name=" Creation">
-| CAL - Code Abstraction LayerA low level implementation giving direct access to the analogue to digital converter peripheral.
+{| class="wikitable" style="width: 600px; background-color:#FFFFFF;"
+|-
+| colspan="3" align="center" style="background-color:#EAE1EA;" |  Primitives
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiBaseChart|Base Chart]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiCanvas|Canvas]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiComplexShape|Complex Shape]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiImage|Image]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
+|-
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiLine|Line]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
 |-
-|width=30%|[[File:Component Icon 8a1cca2f_7df1_4b3a_b24b_ca575fe84348.png|Image]] [[Component: ID 8a1cca2f_7df1_4b3a_b24b_ca575fe84348|CAN (CAL)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiShape|Shape]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| CAL = Code Abstraction Layer - Allows one code base to run on a wide range of chips.Low level routines for controling the internal CAN peripheral.
 |-
-|width=30%|[[File:Component Icon 5bc4e362_1d31_4533_b8dd_134a53c5c0d9.png|Image]] [[Component: ID 5bc4e362_1d31_4533_b8dd_134a53c5c0d9|DMA (CAL)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID component:GdiText|Text]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| CAL - Code Abstraction LayerA low level implementation giving direct access to DMA routines.
 |-
-|width=30%|[[File:Component Icon 18738948_277c_4ed2_8be0_becc616cb0b9.png|Image]] [[Component: ID 18738948_277c_4ed2_8be0_becc616cb0b9|EEPROM (CAL)]]
+| colspan="3" align="center" style="background-color:#EAE1EA;" |  Web Primitives
-| CAL = Code Abstraction Layer - Allows one code base to run on a wide range of chips.A low level implementation giving direct access to the EEPROM peripheral.
 |-
-|width=30%|[[File:Component Icon f857ba2b_69dd_4c95_b14d_cd0979f066f1.png|Image]] [[Component: ID f857ba2b_69dd_4c95_b14d_cd0979f066f1|FLASH (CAL)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID cf57b83c_426c_4db7_964e_7c99643f5bc7|Complex Shape]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| CAL - Code Abstraction LayerA low level implementation giving direct access to Flash read and write routines.
 |-
-|width=30%|[[File:Component Icon 71d6cb24_d865_4ea8_b147_734ef7f76850.png|Image]] [[Component: ID 71d6cb24_d865_4ea8_b147_734ef7f76850|HBRIDGE (CAL)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID d8bcae4d_437d_4252_bdc7_d8132145f18e|Image]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| CAL = Code Abstraction Layer - Allows one code base to run on a wide range of chips.A low level implementation giving direct access to the H-Bridge peripheral.Currently only supports compatible 8-bit PIC devices.
 |-
-|width=30%|[[File:Component Icon ed3a5141_43bb_43e0_86b0_2243fd1147ca.png|Image]] [[Component: ID ed3a5141_43bb_43e0_86b0_2243fd1147ca|I2C (CAL)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 8572e90c_bb9d_4d3c_8350_a68d412af899|Label]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| CAL = Code Abstraction Layer - Allows one code base to run on a wide range of chips.A low level implementation giving direct access to the Two Wire I²C peripheral.
 |-
-|width=30%|[[File:Component Icon 068080a0_b949_4a7e_b370_c45430e0c9de.png|Image]] [[Component: ID 068080a0_b949_4a7e_b370_c45430e0c9de|PWM (CAL)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 2b8bf5a1_2d66_44fe_8023_cb41c33d1add|Shape]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| CAL = Code Abstraction Layer - Allows one code base to run on a wide range of chips.A low level implementation giving direct access to the Pulse Width Modulation peripheral.
 |-
-|width=30%|[[File:Component Icon c67171df_0ad6_4b11_8361_cfe14b072847.png|Image]] [[Component: ID c67171df_0ad6_4b11_8361_cfe14b072847|SPI (CAL)]]
+| width="80%" style="background-color:#e8ffec;" | [[Component: ID 3bd55a33_d9ed_44a0_80d9_76a8d954a335|Text Block]]
+| width="20%" align="center" style="background-color:#e8ffec;" | 2d
-| CAL = Code Abstraction Layer - Allows one code base to run on a wide range of chips.A low level implementation giving direct access to the Serial Peripheral Interface peripheral.
 |-
-|width=30%|[[File:Component Icon 91b64b1d_b8b2_40f1_b073_e953a91fa234.png|Image]] [[Component: ID 91b64b1d_b8b2_40f1_b073_e953a91fa234|UART (CAL)]]
+|}
-| CAL = Code Abstraction Layer - Allows one code base to run on a wide range of chips.A low level implementation giving direct access to the UART peripheral.Includes simulation functionality to commmunicate via a COM port or an Injector component.Also includes timestamped logging via the console and Data Recorder trace monitoring support.
+</tab>
-|-
+</tabs>
-|width=30%|[[File:Component Icon a7c1210d_3637_4a18_a6b3_9414ee73b179.png|Image]] [[Component: ID a7c1210d_3637_4a18_a6b3_9414ee73b179|UART SCADA (CAL)]]
-| CAL = Code Abstraction Layer - Allows one code base to run on a wide range of chips.A low level implementation giving direct access to the UART peripheral.Includes simulation functionality to commmunicate via a COM port or an Injector component.Also includes timestamped logging via the console and Data Recorder trace monitoring support.
-|}

Calculation
Base 64	2d
Linear Feedback Shift Register	2d
Map Function	2d
Median 16-bit	2d
Median 32-bit	2d
Median Float	2d
Standard Deviation	2d
Type Conversions	2d
Timing
PIC32 Core Timer	2d
STM32 Timer	2d
Timed Interval	2d
Timer	2d

DSP Inputs
Data Queue to Bits	2d
Input ADC	2d
Input CSV	2d
Input Digital	2d
Input Digital Pin	2d
Quadrature Generator	2d
Waveform Generator	2d
DSP Outputs
Bits to Data Queue	2d
Level	2d
Output CSV	2d
Output DAC	2d
Output Digital	2d
Output Digital Pin	2d
Output PWM	2d
Output Port	2d
DSP Operators
Adder	2d
Averager	2d
Deinterlace	2d
Delay	2d
Fast Fourier Transform (FFT)	2d
Filter	2d
Interlace	2d
Kalman Filter	2d
Math	2d
Median	2d
Multiplex	2d
Offset	2d
On/Off Control	2d
PID Control	2d
Rectifier	2d
Scale	2d
Simulated Control Load	2d

Comms: Interface
CAN (Internal, MCP2515)	2d
I2C Master	2d
I2C Slave	2d
I2S Master/Slave ESP32	2d
LIN Master	2d
LIN Slave	2d
MULTIUART	2d
One Wire	2d
One Wire (DS2482)	2d
SPI Master	2d
SPI Slave	2d
UART (RS232)	2d
UART Software (Timer)	2d
Comms: System
DALI Master	2d
DALI Slave	2d
DMX-512 Master	2d
DMX-512 Slave	2d
I2C Multiplexer (TCA9548A)	2d
J1939 Automotive Node	2d
MIDI	2d
Modbus Master	2d
Modbus Slave	2d
Modbus Slave USB	2d
Modbus TCP Master	2d
Modbus TCP Slave	2d
OBD2 ECU (Server)	2d
Visi (4DSystems)	2d
Comms: IoT/Cloud
BBC News	2d
BBC Weather Forecast	2d
BBC Weather Observation	2d
EtherCAT Slave (EasyCAT)	2d
IoT Made Easy	2d
JSON Decoder	2d
JSON Encoder	2d
MQTT Client	2d
Comms: Networking
Hydro Encryption	2d
Network Communications	2d
TCP/IP (ENC28J60)	2d
TCP/IP (NM7010A)	2d
TCP/IP (Raspberry Pi)	2d
TCP/IP (W5500)	2d
TCP/IP (WIZ810MJ W5100)	2d
WLAN (ESP-12S)	2d
WLAN (ESP32)	2d
WLAN (ESP8266)	2d
Webserver (GENERIC - Flash / File)	2d
Webserver (NM7010A)	2d
Webserver (W5500)	2d
Webserver (WIZ810MJ)	2d
Comms: USB
USB HID	2d
USB MIDI	2d
USB Serial	2d
USB Slave	2d
Wireless
Bluetooth (EB024, Generic AT)	2d
Bluetooth (ESP32 SPP)	2d
Bluetooth (HC05 / HC06)	2d
Bluetooth (RN4677)	2d
Bluetooth v2 (EB024, Generic AT)	2d
GPS (EB056, Generic NMEA)	2d
GSM (EB066, Generic AT)	2d
IrDA (EB012, MCP1250, MCP2120)	2d
LoRa (LAMBDA SX1272)	2d
RC5 (EB060, Generic 36KHz)	2d
RF ISM (EB063, MRF49XA)	2d
RF Transceiver (nRF24L01)	2d
RFID (EB052, RWD-MICODE)	2d
RFID (MFRC522)	2d
RFID (Sparkfun Quiic / ID-12LA)	2d
SRF (WirelessThings)	2d
Zigbee (EB051, XBEE)	2d

E-blocks 2
Actuators	2d
Bluetooth	2d
CAN_Bus_BL0140	2d
Colour GLCD (BL0157)	2d
Combo	2d
E-block 2 Helper	2d
GLCD Monochrome	2d
GSM (BL0131)	2d
IO Expander	2d
Keypad (BL0138)	2d
LCD	2d
LED	2d
Micro SD Card	2d
RFID (BL0197)	2d
Relay (BL0183)	2d
Servo Motor Controller	2d
Sound Sensor (Grove 101020023)	2d
Switch	2d
SysBlocks	2d
TCP/IP	2d
WIFI	2d
Zigbee	2d
E-blocks 2 Sensors
Accel / Gyro 6-Axis (Grove 105020012)	2d
Barometer (BMP280 / Grove 101020192)	2d
Colour Sensor (Grove 101020341)	3d
Infrared Reflective Sensor (Grove 101020174)	3d
PIR Motion (Grove 101020020)	2d
Temp / Humidity (Grove 101020212)	2d
Ultrasonic Ranger (Grove 101020010)	2d
Water Sensor (Grove 101020018)	2d
Raspberry Pi Hat
Sense Hat	3d
Misc Circuit
GameCode	3d
LED Cube	3d
RGB Xmas Tree	3d
Robotics
Formula AllCode	3d
Formula Flowcode	3d
MIAC Module
MIAC (Arduino-Compatible)	3d
MIAC (dsPIC)	3d
MIAC NXT / ECU	2d

API Slave Devices
API (Arduino Mega)	2d
API (Arduino Uno)	2d
API (BL0032)	2d
API (ECIO28P)	2d
API (ECIO40P)	2d
API (ESP32)	2d
API (Interface Board)	2d
API (RPI)	2d
Test Injectors
Injector (API Analog Input)	2d
Injector (API Digital Input)	2d
Injector (API Digital Output)	2d
Injector (AT)	2d
Injector (COM)	2d
Injector (File)	2d
Injector (Flowcode vNet)	2d
Injector (Human Interface)	2d

Scenarios
3D Printer	3d
Airplane Landing Gear	3d
CNC Machine	3d
Car Seat	3d
Daytona Racetrack	3d
Maze Generator	3d
Oven Simulation	2d
Pedestrian Crossing	3d
Pedestrian Crossing	2d
Traffic Light	2d
Traffic Light 1-Way	3d
Traffic Light 2-Way	3d

Matrix Tools
Device Helper	2d
FCD helper	2d
IntOsc Helper	2d
Is Sim	2d
Indicators
Circular Gauge	2d
Console Writer	2d
LinearGauge	2d
Logo Indicator	3d
Numeric Display	3d
On / Off Indicator	2d
Speech (RealSpeak)	2d
Controls
Circular Knob	2d
Joystick	3d
Joystick 2D	2d
LinearSlider	2d
Number Pad	2d
RadioButton	2d
Charts
Area Chart	2d
Bar Chart	2d
Bubble Chart	2d
Column Chart	2d
Line Chart	2d
Pie Chart	2d
Polar Chart	2d
Radar Chart	2d
Ternary Chart	2d
XY Chart	2d
Runtime Tools
COM Port	2d
Console Debugger	2d
Console User Input	2d
Data Recorder Setup	2d
Event Log	2d
Input Message Box	2d
Keyboard	2d
Message Box	2d
Mouse	2d
Panel Console Viewer	2d
Property Manager	2d
Serial Monitor	2d
Simulation External Input	2d
Time Stamp	2d
Timed Event Trigger	2d
Tone Generator	2d
XML JSON Parser	2d

Primitives (2d)
Base Chart	2d
Button	2d
Canvas	2d
ComboBox	2d
Complex Shape	2d
Connection	2d
EditBox	2d
Gauge	2d
Grid	2d
Image	2d
Line	2d
Numeric Indicator	2d
Shape	2d
Switch	2d
Text	2d
Primitives (3d)
3D Panel Measurement Tool	3d
Label	3d
Shape	3d
Text box	3d

Digital Control
Keyboard	2d
Number Pad	2d
Pedestrian Crossing	2d
RadioButton	2d
Switch Array (Push) 2D	2d
Switch Array (Slide) 2D	2d
Switch Push Button	2d
Switch Rotary 0 - 1	2d
Switch Slide	2d
Switch User Images	2d
Analog Control
Circular Knob	2d
Joystick	3d
Joystick 2D	2d
LinearSlider	2d
Mouse	2d
Dialogue Control
Console User Input	2d
Input Message Box	2d

Digital Indicator
7Segment (Single)	2d
LED Array	2d
LED Mono	2d
LED Mono Custom	2d
LED Mono User Images	2d
Logo Indicator	3d
Numeric Display	3d
On / Off Indicator	2d
Simulation 7 Seg	2d
Traffic Light	2d
Analog Indicator
Circular Gauge	2d
LinearGauge	2d
Speech (RealSpeak)	2d
Dialogue Indicator
Console Writer	2d
Message Box	2d
Panel Console Viewer	2d
Audio Indicator
Tone Generator	2d
WAV Library File	2d

AllCode
Control	2d
Electrical Machines	2d
Formula AllCode API	2d
MIAC AllCode API (dsPIC)	2d
MIAC NXT AllCode API	2d
MIAC USB Slave API (PIC)	2d
Robot Arm v2	both
API Slave Devices
API (Arduino Mega)	2d
API (Arduino Uno)	2d
API (BL0032)	2d
API (ECIO28P)	2d
API (ECIO40P)	2d
API (ESP32)	2d
API (Interface Board)	2d
API (RPI)	2d
Test Equipment
PicoScope	2d
TTI Power Supply - PL155-P	2d
TTI TG5011 Signal Generator	2d
Third Party
FTDI (FTD2XX)	2d

API Audio
DFPlayer (MP3 / WAV)	2d
Heelight Sensor (Grove 101020312)	2d
API Comms
CAN (Internal, MCP2515)	2d
I2C Master	2d
J1939 Automotive Node	2d
MULTIUART	2d
OBD2 ECU (Server)	2d
One Wire (DS2482)	2d
RFID (Sparkfun Quiic / ID-12LA)	2d
SPI Master	2d
UART (RS232)	2d
API Display
GLCD (Grove OLED)	2d
GLCD (SH1106) I2C	2d
GLCD (SSD1306) I2C	2d
GLCD (SSD1327) I2C	2d
GLCD (ST7036) I2C	2d
LCD (Grove - I2C)	2d
LCD (Grove - UART)	2d
LCD I2C (Backpack)	2d
LCD I2C (LCM1602)	2d
LCD SPI (MiniClick)	2d
API Environmental
Air Quality (BME688)	2d
Barometer (BME280)	2d
Barometer (BMP180)	2d
Barometer (BMP280 / Grove 101020192)	2d
Barometer (DPS310)	2d
Barometer (MS5637)	2d
Magnetometer (BMM150)	2d
Pulse Oximeter (Max30100)	2d
Temp / Humidity (Grove 101020212)	2d
Temp / Humidity (AHT10)	2d
Temp / Humidity (HTS221)	2d
Temp / Humidity (SHT21)	2d
Temp / Humidity (SHT31)	2d
Temperature (DS1822)	2d
Temperature (DS18B20)	2d
Temperature (DS18S20)	2d
Temperature (LM75B)	2d
Thermocouple (MAX31855)	2d
Thermocouple (MAX31856)	2d
Thermocouple (MCP960X)	2d
API Electrical
Energy Monitor (PZEM-004T)	2d
API IO
ADC (AD7680)	2d
ADC (MCP356X)	2d
ADC QUAD + DAC (PCF8591)	2d
DAC (AD5662)	2d
DAC (MCP4725)	2d
DAC (MCP47x6)	2d
DAC (MCP48x1)	2d
DAC (MCP49x1)	2d
DAC Dual (MCP48x2)	2d
DAC Dual (MCP49x2)	2d
DAC Quad (MCP4728)	2d
Digital Potentiometer (MCP41XX / MCP42XX)	2d
Digital Potentiometer (MCP41XXX / MCP42XXX)	2d
Digital Potentiometer (MCP44XX)	2d
Digital Potentiometer (MCP45XX / MCP46XX)	2d
Grove I2C Motor Driver	2d
IO Expander (MCP23017)	2d
IO Expander (MCP23S17)	2d
IO Expander (PCF8574)	2d
IO Expander (PCF8575)	2d
Joystick (Sparkfun Quiic)	3d
Joystick (Sparkfun Quiic) 2D	2d
PWM 16CH 12Bit (PCA9685)	2d
API Light
Ambient Light	2d
Colour Sensor (Grove 101020341)	3d
Infrared Array AMG88xx	2d
Range Time of Flight (VL53L0X)	2d
API Movement Orientation
Accel / Gyro / Mag 9-Axis (LSM9DS1)	2d
Accel / Gyro / Mag 9-Axis (MPU9250)	2d
Accel / Gyro 6-Axis (Grove 105020012)	2d
Accel / Gyro 6-Axis (MPU-6050)	2d
Accel / Gyro 6-Axis (MPU-6886)	2d
Accel / Mag 6-Axis (LSM303D)	2d
Accel / Mag 6-Axis (LSM303DLHC)	2d
Accelerometer 3-Axis (LIS3DHTR)	2d
Accelerometer 3-Axis (LIS3LV02DQ)	2d
Accelerometer 3-Axis (MMA8452Q)	2d
Gyroscope 3-Axis (L3G4200D)	2d
Gyroscope 3-Axis I2C (L3GD20)	2d
Gyroscope 3-Axis SPI (L3GD20)	2d
Magnetometer (SM324)	2d
Magnetometer 3-Axis (HMC5883L)	2d

Control
Button	2d
Check Box	2d
Choose Colour	2d
Choose File	2d
Combo Box	2d
Input Text	2d
Radio Button	2d
Slider	2d
Switch	2d

Comms
HTTP Fetch	2d
HTTP Params	2d
JSON Decoder	2d
JSON Encoder	2d
MQTT Client	2d
SerialPort	2d
Data
Array Helper	2d
Object Helper	2d
Popup Message	2d
Storage	2d
Timer	2d

Primitives
Base Chart	2d
Canvas	2d
Complex Shape	2d
Image	2d
Line	2d
Shape	2d
Text	2d
Web Primitives
Complex Shape	2d
Image	2d
Label	2d
Shape	2d
Text Block	2d